I have spent a crazy amount of time trying to figure out why VLAN Filtering only works on the station bridge side and not the bridge side, without breaking the station side.
VLANs i want to trunk across this LHG60ad to LHG60ad wireless bridge:
VLAN1 - default (in use elsewhere)
VLAN20
VLAN105 - MGMT
VLAN230
I believe I have configure these devices correctly, however it seems not, please help!
P2P A-B Config:
Code: Select all
/interface bridge
add name=bridge1 protocol-mode=none
/interface w60g
set [ find ] disabled=no mode=bridge name=wlan60-1 put-stations-in-bridge=bridge1 ssid=KSW
/interface vlan
add interface=bridge1 name=VLAN1 vlan-id=1
add interface=bridge1 name=VLAN20 vlan-id=20
add interface=bridge1 name=MGMT vlan-id=105
add interface=bridge1 name=VLAN230 vlan-id=230
/interface w60g station
add mac-address=C4:AD:34:AC:0E:06 name=wlan60-station-1 parent=wlan60-1 remote-address=C4:AD:34:AC:0C:5E
/interface list
add name=WAN
add name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=wlan60-1
/interface bridge vlan
add bridge=bridge1 untagged=ether1,wlan60-1 vlan-ids=1
add bridge=bridge1 tagged=ether1,wlan60-1 vlan-ids=20
add bridge=bridge1 tagged=ether1,wlan60-1,bridge1 vlan-ids=105
add bridge=bridge1 tagged=ether1,wlan60-1 vlan-ids=230
/ip address
add address=10.20.105.200 interface=MGMT network=10.20.105.0
/system identity
set name=AtoB
P2P B to A Config:
Code: Select all
/interface bridge
add name=bridge1 protocol-mode=none
/interface w60g
set [ find ] disabled=no mode=station-bridge name=wlan60-1 ssid=KSW
/interface vlan
add interface=bridge1 name=VLAN1 vlan-id=1
add interface=bridge1 name=VLAN20 vlan-id=20
add interface=bridge1 name=MGMT vlan-id=105
add interface=bridge1 name=VLAN230 vlan-id=230
/interface list
add name=WAN
add name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=wlan60-1
/interface bridge vlan
add bridge=bridge1 untagged=ether1,wlan60-1 vlan-ids=1
add bridge=bridge1 tagged=ether1,wlan60-1 vlan-ids=20
add bridge=bridge1 tagged=ether1,wlan60-1,bridge1 vlan-ids=105
add bridge=bridge1 tagged=ether1,wlan60-1 vlan-ids=230
/ip address
add address=10.20.105.201/24 interface=MGMT network=10.20.105.0
/system identity
set name=BtoA