Community discussions

MikroTik App
 
aymanaskar
just joined
Topic Author
Posts: 2
Joined: Tue Aug 16, 2022 6:29 pm

Assign specific WAN interface to LAN ip address

Tue Aug 16, 2022 6:41 pm

Hello
I have two ISP's as WAN interfaces (192.168.2.2 WAN1 & 192.168.3.2 WAN2) in the first two ports
and bridged other ports to LAN (192.168.1.1/24)
I have configured that all LAN can use traffic from both WAN1 & WAN2

NOW I want to make a specific lan address (192.168.1.50) to be assigned only to WAN1 to consume from a specific ISP
and keep all other LAN assigned to both WAN1 & WAN2.

Thanks in advance
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 19101
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: Assign specific WAN interface to LAN ip address

Tue Aug 16, 2022 10:04 pm

How are users currently assigned to wan1 and wan2 ??
 
aymanaskar
just joined
Topic Author
Posts: 2
Joined: Tue Aug 16, 2022 6:29 pm

Re: Assign specific WAN interface to LAN ip address

Wed Aug 17, 2022 12:13 am

Dual WAN load balancing BY NTH method
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 19101
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: Assign specific WAN interface to LAN ip address

Wed Aug 17, 2022 2:17 pm

Not familiar with that as most either use
a. Failover
b. PCC balancing see discher MUM - https://mum.mikrotik.com/presentations/US12/steve.pdf
c. Bandwidth Based Load based balancing see Tomas MUM - https://mum.mikrotik.com/presentations/US12/tomas.pdf

Post the config on the router........

Who is online

Users browsing this forum: almdandi, Amazon [Bot], Bing [Bot], mkx, mtkvvv, xstrid3rx and 82 guests