Let's say I have the folllowing setup:
/interface bridge vlan
add bridge=bridge1 tagged=bridge1,wlan2.0,ether1,ether2,ether3,ether4,ether5 vlan-ids=3
add bridge=bridge1 tagged=wlan2.0,ether1,ether2,ether3,ether4,ether5 vlan-ids=20
add bridge=bridge1 tagged=wlan2.0 vlan-ids=25
add bridge=bridge1 tagged=wlan2.0 vlan-ids=30
...
add bridge=bridge1 tagged=wlan2.0 vlan-ids=50
----
I would like to add tagged=eth1,2,3,4,5 to vlan-ids=25 to 50 (rather than manually one by one adding via gui)
How would I use the find command to do this. I tried the following without success:
/interface bridge vlan
[find vlan-ids=25] set tagged=ether1,ether2,ether3,ether4,ether5