I have upgraded a 60G bridge from 7.3.1 to 7.5. First I upgraded the station bridge all was fine, After that i upgraded the station, and the link is flapping.
As The configuration was not changed I assume the 7.5 needs more settings.
Station:
Code: Select all
/interface ethernet
set [ find default-name=ether1 ] loop-protect=on loop-protect-disable-time=1m
/interface w60g
set [ find ] disabled=no mode=bridge name=wlan60-1 password=XXX put-stations-in-bridge=bridge ssid=WWB
/interface vlan
add interface=bridge name=vlam-mgmt vlan-id=21
/interface w60g station
add mac-address=18:FD:74:24:CB:DF name=wlan60-station-1 parent=wlan60-1 put-in-bridge=bridge remote-address=18:FD:74:24:CB:E1
Code: Select all
/interface ethernet
set [ find default-name=ether1 ] loop-protect=on loop-protect-disable-time=1m
/interface w60g
set [ find ] disabled=no mode=station-bridge name=wlan60-1 password=XXX ssid=WWB
/interface vlan
add interface=bridge name=vlan_mgmt vlan-id=21
/interface w60g station
add mac-address=18:FD:74:24:CB:DF name=wlan60-station-1 parent=wlan60-1 put-in-bridge=bridge remote-address=18:FD:74:24:CB:E1
Any other idea?
Thanks