yes, for single-mode modules, you'll need single mode fiber/cable.
Check the specs, that the advertised wavelengths and desired distance/length match.
Assuming you don't have experience with manufacturing the proper cable, the number of strands don't count into it, really.
Fetch a pre-manufactured fiber patch-cable with the right connectors already attached.
Check the required connector and polish type, in case of the named module it should be LC-LC / UPC-UPC connector type.
When deploying it in your cabinet, meaning you are not required to pull it through a wall/accross the building through en empty conduit, you'll want Duplex cables.
Otherwise check if Simplex cables will fit through your wall openings/empty conduits.
Something like this:
https://www.fs.com/c/os2-9-125-single-m ... sh-type=16
If not, reach out to a trained technician with the proper gear and experience to deploy a fiber cable in your building properly.