Hi everybody, I have a problem when I try to get the voltage value from 750GL router using the snmp protocol.
The terminal of 750GL show the OIDs of system health:
[admin@MikroTik] > system health print oid
active-fan: .1.3.6.1.4.1.14988.1.1.3.9.0
voltage: .1.3.6.1.4.1.14988.1.1.3.8.0
temperature: .1.3.6.1.4.1.14988.1.1.3.10.0
processor-temperature: .1.3.6.1.4.1.14988.1.1.3.11.0
current: .1.3.6.1.4.1.14988.1.1.3.13.0
fan-speed: .1.3.6.1.4.1.14988.1.1.3.17.0
fan-speed2: .1.3.6.1.4.1.14988.1.1.3.18.0
power-consumption: .1.3.6.1.4.1.14988.1.1.3.12.0
psu1-state: .1.3.6.1.4.1.14988.1.1.3.15.0
psu2-state: .1.3.6.1.4.1.14988.1.1.3.16.0
When I use the command snmpGet I get the following:
D:\SNMP>snmpGet -v:1 -c:public -r:192.168.3.1 -o:.1.3.6.1.4.1.14988.1.1.3.8.0
SnmpGet v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on
http://www.snmpsoft.com ]
%Failed to get value of SNMP variable. Variable does not exist (noSuchName(2))
However when I use other OID the request is succesful:
D:\SNMP>snmpGet -v:1 -c:public -r:192.168.3.1 -o:.1.3.6.1.2.1.2.2.1.2.1
SnmpGet v1.01 - Copyright (C) 2009 SnmpSoft Company
[ More useful network tools on
http://www.snmpsoft.com ]
Is it possible to get the voltage value from 750GL and how?.
Thanks in advance.