Community discussions

MikroTik App
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 897
Joined: Thu Dec 11, 2014 8:53 am

v7.5 [stable] is released!

Wed Aug 31, 2022 1:54 pm

RouterOS version 7.5 is released in the "v7 stable" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during the upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 7.5 (2022-Aug-30 12:25):

*) bgp - fixed remote refuse capability options, max prefix limit errors and administrative stop;
*) bgp - improved stability when "default-originate" is configured;
*) bridge - fixed "new-priority" value validation for NAT rules;
*) capsman - added randomized range option for "reselect-interval" parameter (CLI only);
*) certificate - fixed handling of empty AKID by SCEP client;
*) console - fixed automatic command completion with keypress;
*) container - added support for running Docker (TM) containers on ARM, ARM64 and x86 (containers created before v7.4 must be recreated);
*) defconf - fixed loading of default configuration on RB4011 with WifiWave2 package enabled;
*) dhcpv4-server - fixed removal of dynamic leases when server is removed;
*) dhcpv6-client - moved invalid lifetime logging message from "debug" to "error" topic;
*) dhcpv6-client - use /128 prefix for IA_NA addresses;
*) dhcpv6-relay - fixed relay forwarding (introduced in v7.1.5);
*) dhcpv6-server - improved stability when acquiring binding;
*) dns - added "address-list" parameter for static DNS entries (CLI only);
*) dns - added "match-subdomain" option for static entries (CLI only);
*) firewall - added support for RTSP helper;
*) health - fixed "temperature" and "power-consumption" readings on RB1100x4;
*) health - improved voltage reading on CRS112-8P-4S;
*) health - renamed "cpu-temperature" to "switch-temperature" on CRS312-4C+8XG, CRS326-24S+2Q+, CRS354-48P-4S+2Q+, CRS354-48G-4S+2Q+, CRS504-4XQ-IN, CRS518-16XS-2XQ;
*) hostpot - fixed Walled Garden functionality for HTTPS sites;
*) hotspot - automatically reject all HTTPS requests passing through HotSpot server for unauthorized users;
*) hotspot - improved stability when receiving bogus packets;
*) hotspot - limit maximum allowed connections based on free RAM resources;
*) hotspot - removed "https-redirect" option;
*) ike2 - allow sending certificate chain as initiator;
*) interface - fixed default interface naming on RB1100x2;
*) l3hw - fixed HW offloaded NAT;
*) leds - fixed default LED configuration for RBwsAP-5Hac2nD;
*) leds - fixed wireless LED functionality on LHGG;
*) lora - do not ignore negative sign for spoofed GPS coordinates;
*) lte - added at-chat and NMEA port support for Simcom modems, USB composition (device id - 0x9003);
*) lte - added at-chat support for Simcom modems, USB composition (device id - 0x9005);
*) lte - added "SIM not inserted" and "SIM failure" messages to "status" and "monitor" commands for AT modems;
*) lte - changed cell ID info display to short format for 3G connections;
*) lte - disallow empty APN name only for default entry;
*) lte - fixed AT channel for Sierra Wireless modems with device ID 0x9091;
*) lte - fixed LTE interface presence for Telit LN940;
*) lte - fixed UDP performance on MMIPS devices;
*) lte - improved antenna scan for Chateau devices with switchable antennas;
*) lte - improved configuration export when multiple LTE interfaces are present;
*) lte - modem dialer, do not reset dialing sequence if modem reply with error to user set init-string;
*) netinstall - fixed Netinstall procedure for ARM devices;
*) netwatch - automatically start migrated probes from previous RouterOS versions;
*) netwatch - changed ICMP default packet loss fail threshold to 85%;
*) ntp - fixed NTP server when "use-local-clock" is used;
*) ospf - fixed handling of external forwarding address;
*) ospf - improved stability when interface is being disabled during database exchange;
*) ovpn - fixed encryption key renewal process which caused periodic session disconnects;
*) ovpn - improved system stability when hardware acceleration is used on ARM64 devices;
*) ovpn - moved disconnected user logging message from "debug" to "info" topic;
*) ping - improved service stability;
*) port - added support for D-Link DWM-222 in serial/PPP mode (device id - 0xac01/0x7e3d);
*) port - added support for Huawei/ZTE K5006z in serial/PPP mode (device id - 0x1017/0x1018);
*) ppp - improved service stability under high load;
*) ppp - use /32 as default netmask if not specified for "routes" parameter;
*) ptp - improved system stability on CRS devices;
*) quickset - removed PPTP and SSTP server addition for "VPN" checkbox;
*) rb5009 - fixed ether1 status reporting after system reboot;
*) route-filter - fixed "delete bgp-communities" command;
*) routerboard - added "reset-button" script feature for TILE devices;
*) sfp - fixed "eeprom" reading on single SFP port ARM devices;
*) sfp - fixed QSFP+ and QSFP28 interface disable when using breakout cable;
*) sfp - fixed unresponsive "sfp1" interface after disabling "ether1" on NetMetal devices;
*) sfp - improved combo SFP ports initialization handling on CRS312-4C+8XG, CRS328-4C-20S-4S+;
*) sfp - improved stability when using 2.5G optical modules in CCR2116, CCR2216 and CRS518;
*) snmp - fixed usage of VRF after system startup;
*) socks - fixed "dst-port" usage when checking access list;
*) ssh - added AES support for PEM decryption;
*) ssh - fixed importing of public keys;
*) ssh - fixed minor typo issue when importing public key;
*) sstp - fixed client stuck in "nonce matching" state;
*) switch - fixed ACL rules for 98DXxxxx switches with more than 28 ports (introduced in v7.3);
*) switch - removed limit for number of hardware-offloaded bonding interfaces;
*) swos - enabled SwitchOS support for CRS310-1G-5S-4S+;
*) swos - fixed SwOS upgrade procedure on CRS305-1G-4S+;
*) traceroute - added "do-not-fragment" parameter support (CLI only);
*) traceroute - increased packet size limit to 65535;
*) vrrp - added "sync-connection-tracking" compatibility with preemption-mode;
*) vrrp - fixed high CPU usage when "sync-connection-tracking=yes" and the backup router goes offline;
*) vrrp - fixed HW offloaded bridge MAC address learning when changing from VRRP master to backup;
*) vrrp - fixed initial connection tracking synchronization, a backup router now always receives all existing connections;
*) vrrp - improved connection tracking synchronization protocol (CTSYNC), the new protocol is incompatible with previous RouterOS versions with "sync-connection-tracking=yes";
*) webfig - allow to specify NTP server as domain name;
*) webfig - fixed displaying of grahs in status pages;
*) webfig - fixed floating point field's negative value in -0.*** format;
*) wifiwave2 - added "sae-pwe" parameter with hash-to-element mechanism for SAE PWE derivation;
*) wifiwave2 - added support for 802.11k;
*) wifiwave2 - disable wireless interface after wireless configuration reset;
*) wifiwave2 - fixed displaying of AKM in scan results;
*) wifiwave2 - fixed duplicated AKM in RSN message;
*) wifiwave2 - fixed group key update for client devices which connect via fast BSS transition;
*) wifiwave2 - fixed incorrect AKM usage for FT-WPA3-EAP-192;
*) wifiwave2 - fixed reassociation response sending for fast transition over DS;
*) wifiwave2 - fixed setting of "ft-nas-identifier" parameter;
*) wifiwave2 - fixed usage of Canada country setting on US locked devices;
*) wifiwave2 - improved default channel width selection for interfaces in station mode;
*) winbox - do not show previously attached LTE interfaces while establishing LTE connection;
*) winbox - enabled all filters by default under "Tools/Torch" menu;
*) winbox - fixed "Enable", "Disable" and "Comment" functions for L2TP-ether type interfaces;
*) winbox - fixed "Next Run" parameter displaying under "System/Scheduler" menu;
*) winbox - fixed "Type" and "Value" field displaying under "System/Health" sub-menu's;
*) winbox - show warning messages for BGP connection entries;
*) wireless - fixed interface initialization on x86 devices;
*) x86 - allow downgrading to RouterOS v6 only if it was previously installed;
*) x86 - fixed advertising of 2500M and 5000M link speeds on ixgbe driver;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while the router is not working as suspected or after some problem has appeared on the device

Please keep this forum topic strictly related to this particular RouterOS release.
 
Rox169
Member Candidate
Member Candidate
Posts: 163
Joined: Sat Sep 04, 2021 1:47 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 1:58 pm

first :) Please let me know on what devices did you try this STABLE version...especially HAP AC3, HAP AC2, any 60 Ghz device....
 
templeos
just joined
Posts: 17
Joined: Mon Aug 26, 2019 3:58 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 2:12 pm

*) webfig - fixed displaying of grahs in status pages
Progress, but you still have work to do. Memory usage and Disk usage gives: ERROR: NO ACCESS!
CPU usage is fine and interfaces.

While you are at it fix mikrotik_logo.png on WebFig. Please make background transparent and not white.

EDIT: the hardware is hAP ac² and is added image where only CPU is present
CPU_only.png
You do not have the required permissions to view the files attached to this post.
Last edited by rextended on Wed Aug 31, 2022 5:32 pm, edited 1 time in total.
Reason: added hw used and image
 
giulianoz
just joined
Posts: 22
Joined: Sat Apr 08, 2017 6:44 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 2:36 pm

*) container - added support for running Docker (TM) containers on ARM, ARM64 and x86 (containers created before v7.4 must be recreated);
Can you explain this, please?
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 2:44 pm

Containers are removed on 7.4 and reintroduced again on 7.5
On changelog of the stable are considerered only the change between previous stable and this version.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 2:50 pm

*) webfig - fixed displaying of grahs in status pages;
Progress, but you still have work to do. Memory usage and Disk usage gives: ERROR: NO ACCESS!

Hardware used: hAP ac²
After trying several times to install 6.44.6, activate the graphs, have them recorded, then update to 7.5,
and repeat the process with 6.46.8 and 6.48.6, I was unable to duplicate the problem.
All the times the graphs worked perfectly.

Probably is a problem on your filesystem, and since you don't give a damn about contacting technical support(*) , I'ts your problem.

(*) On removed useless posts, the user do not want provide supout.rif to technical support at support@mikrotik.com
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 3:04 pm

While you are at it fix mikrotik_logo.png on WebFig. Please make background transparent and not white.
What is the problem???
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
User avatar
eworm
Forum Veteran
Forum Veteran
Posts: 979
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 3:08 pm

It looks ugly to have a white rectangle on a grey gradient...
 
th0massin0
Member Candidate
Member Candidate
Posts: 156
Joined: Sun May 11, 2014 4:16 am
Location: Poland

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 3:33 pm

SUP-67642 (SSTP long connecting).
 
winap
just joined
Posts: 20
Joined: Thu Sep 23, 2021 10:57 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 3:38 pm

So tell me, is there any difference between RC2 and final?
Thanks
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 3:45 pm

The differences reported are between 7.4.1 and 7.5, it should not be changed between 7.5rc2 and 7.5

****************************

@eworm
It looks ugly to have a white rectangle on a grey gradient...
I try to use my monitor at home, thanks.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
mmc
newbie
Posts: 39
Joined: Wed Dec 29, 2004 1:44 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 4:14 pm

*) ospf - fixed handling of external forwarding address;
was this a bug regarding ospf redistribution - does somebody have more info about it?
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 4:16 pm

Update successfully done without problems (ROS and FW) from 7.4.1 to 7.5 on the following devices:
hc_247.jpg
You do not have the required permissions to view the files attached to this post.
 
DL7JP
Frequent Visitor
Frequent Visitor
Posts: 85
Joined: Sat Oct 19, 2013 4:14 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 4:47 pm

CRS125-24G, hAP ac, hAP ac^2, CCR2004-16G: Upgraded, no problems noticed.
 
User avatar
jvanhambelgium
Forum Veteran
Forum Veteran
Posts: 824
Joined: Thu Jul 14, 2016 9:29 pm
Location: Belgium

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 4:54 pm

Updated RB3011 from 7.5RC2 to 7.5 "Stable" , no imminent issues ;-) for now.
 
User avatar
BrateloSlava
Member Candidate
Member Candidate
Posts: 129
Joined: Mon Aug 09, 2021 10:33 am
Location: Ukraine, Kharkiv

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 5:06 pm

*) capsman - added randomized range option for "reselect-interval" parameter (CLI only);
Example, please.
 
didis81
just joined
Posts: 10
Joined: Mon Apr 06, 2015 1:29 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 5:17 pm

Updated a small network about 50 device to 7.5 Stable no issues for now.
All good
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 5:44 pm

*) capsman - added randomized range option for "reselect-interval" parameter (CLI only);
Example, please.

This example is for obtain a random FIXED time everytime the script is called, or when creating new interface,
but after first creation, or after set, the time between intervals still the same.
/caps-man/interface set <CAPSMAN INTERFACE NAME> channel.reselect-interval=[:rndnum 86400 172800]

On next @Guntis post, you have the example to set a range between two values for channel.reselect-interval,
with that values when the channel.reselect-interval expire, the memorized values are used for choose everytime a different time interval between two channel-reselection.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
Guntis
MikroTik Support
MikroTik Support
Posts: 95
Joined: Fri Jul 20, 2018 1:40 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 6:28 pm

Example: caps-man/configuration/add channel.reselect-interval=10m..20m
It will run channel reselection at a random interval that is within the defined range.
 
mseidler
just joined
Posts: 10
Joined: Fri Sep 05, 2014 10:27 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 6:38 pm

Upgraded an RB3011, RB4011, CRS326-24G-2S+, CRS1128-8P-4S and CRS309-1G-8S+, 2x wAP G-5HacT2HnD without issues.
 
TIS
just joined
Posts: 1
Joined: Wed Oct 24, 2018 12:21 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 7:25 pm

Upgraded from 7.4.1 to 7.5 CHR Amazon + HEX 750G r3 flight normal :)
 
juniorespow
just joined
Posts: 1
Joined: Thu Feb 24, 2022 10:06 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 7:37 pm

Issue showing uptime and Remote ID of BGP SESSIONS after upgrading to 7.5
You do not have the required permissions to view the files attached to this post.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 8:20 pm

2x hap AC3 upgraded (home network, wifiwave2 and VLANs, nothing fancy), no noticeable issues.
 
User avatar
tarikin
newbie
Posts: 35
Joined: Sat Sep 24, 2016 11:55 pm
Location: Vietnam
Contact:

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 8:39 pm

After reboot lost my home hap ac2 7.4.1 -> 7.5 with:
- vrrp master
- capsman
- dual pppoe wan ipv4, ipv6
- some other functions

Got boot loop.

Another hap ac2 with similar configuration upgraded without issues
- configured but disabled vrrp slave interface
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 8:54 pm

WAP60G station-bridge (WAP60G-AP are ok as bridge-ap) causing high bandwidth (20-30Gbps) only on wlan60-1 interface and 1xcore CPU spike upon management login. 7.4.1 works fine - only a problem on 7.5
 
User avatar
Panbambaryla
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Sat Jun 08, 2019 12:12 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 9:51 pm

Why does it take so long to run SFP+ Mikrotik transceiver on RB4011iGS+5HacQ2HnD? It started to behave this way a few 7 releases back and since that moment I always have to wait much longer for communication with my LAN.
Interfaces1.jpg
Interfaces2.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by Panbambaryla on Thu Sep 01, 2022 10:00 am, edited 2 times in total.
 
revilo
just joined
Posts: 1
Joined: Sun Jun 14, 2020 8:00 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 9:59 pm

RB5009UG+S+ Moved from 7.4 to 7.5 - ppp client not connecting after upgrade (connected once during multiple reboots)
Moved to 7.5rc2 now and it's connecting normally again.
 
LonDat
just joined
Posts: 1
Joined: Tue Sep 24, 2019 6:25 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 10:38 pm

*) netinstall - fixed Netinstall procedure for ARM devices;

Does it mean, I should do Netinstall again when I did Netinstall on AC3 and Audience (both ARM) with OS 7.3.1 and 7.4.1?
 
draid
Frequent Visitor
Frequent Visitor
Posts: 85
Joined: Wed Aug 22, 2018 5:42 pm

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 10:41 pm

The SFP module information is still missing and this is getting really frustrating. I understand if it was some kind of 3rd party SFP module, but one would expect a MT branded module to work out of the box with a MT device as intended. HexS and S-85DLC05D. I'm tired of rolling back to 6.49 every time. At least give some information on this problem...
 
Rox169
Member Candidate
Member Candidate
Posts: 163
Joined: Sat Sep 04, 2021 1:47 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 10:57 pm

WAP60G station-bridge (WAP60G-AP are ok as bridge-ap) causing high bandwidth (20-30Gbps) only on wlan60-1 interface and 1xcore CPU spike upon management login. 7.4.1 works fine - only a problem on 7.5
Hi,

anyone else has this issue? Have you log SUP to Mikrotik?
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.5 [stable] is released!

Wed Aug 31, 2022 11:28 pm

Yes Support as an auto generated supout since it crashed the CPU with the load.
 
Guscht
Member Candidate
Member Candidate
Posts: 166
Joined: Thu Jul 01, 2010 5:32 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 12:52 am

Without incident my homenetwork:
Screenshot 2022-08-31 235114.jpg
You do not have the required permissions to view the files attached to this post.
 
lelmus
newbie
Posts: 28
Joined: Wed Oct 17, 2012 5:50 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 3:07 am

Updated to 7.5 stable and have issue with sfp+. Every time I software reboot RB4011iGS+5HacQ2HnD, I keep getting "sfpplus1 fcs error on link" on sfpplus1 of CCR1016-12S-1S+. Winbox is connected to CCR1016-12S-1S+ as its the main router that everything connects to. The way to fix RB4011iGS+5HacQ2HnD is by hard rebooting with complete power loss for 10+ seconds. Doing a software reboot RB4011iGS+5HacQ2HnD locks me up again. All sfp+ ports are on default settings.
 
aglabs
newbie
Posts: 33
Joined: Mon Dec 28, 2020 1:05 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 3:50 am

*) l3hw - fixed HW offloaded NAT;
Interesting, on my CCR2116 l3hw nat was working fine for me before 7.5. Post 7.5 traffic that is natted has high % drop rate so high not even a TLS session can establish. Disabling l3hw removes the packet loss behavior.
 
User avatar
nichky
Forum Guru
Forum Guru
Posts: 1092
Joined: Tue Jun 23, 2015 2:35 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 4:19 am

Example: caps-man/configuration/add channel.reselect-interval=10m..20m
It will run channel reselection at a random interval that is within the defined range.
@Guntis
so that one will have effect only if the channel is auto , if i specify it, then there is no point using that , am i correct?
 
hoeser
just joined
Posts: 16
Joined: Wed Jan 13, 2021 5:45 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 5:02 am

VRRP issues between a setup with an x86 & CCR2004 master/slave preemptive setup on 7.5 (both devices) - both nodes showing master, packet sniffing confirms all traffic including broadcast is seen by both nodes.

I wanted to start debugging this outside production on pair lab HEXs - both on 7.5, both fresh barebones configs - ended up with a completely different VRRP problem - vrrp IP and vrrp interfaces stay in invalid state on both routers despite valid shared /32 address in the same address space as the parent interface.. was using ether3 on both lab hex routers connected directly.

So, VRRP seems a little janky on 7.5
 
User avatar
sirbryan
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Fri May 29, 2020 6:40 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 5:25 am

*) l3hw - fixed HW offloaded NAT;
Interesting, on my CCR2116 l3hw nat was working fine for me before 7.5. Post 7.5 traffic that is natted has high % drop rate so high not even a TLS session can establish. Disabling l3hw removes the packet loss behavior.
I confirmed this on my 2115 as well. L3HW switching was enabled on the switch and NAT worked prior to 7.5. After upgrade NAT was broken until I disabled L3HW switching on the switch.
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 7:13 am

Updated to 7.5 stable and have issue with sfp+. Every time I software reboot RB4011iGS+5HacQ2HnD, I keep getting "sfpplus1 fcs error on link" on sfpplus1 of CCR1016-12S-1S+. Winbox is connected to CCR1016-12S-1S+ as its the main router that everything connects to. The way to fix RB4011iGS+5HacQ2HnD is by hard rebooting with complete power loss for 10+ seconds. Doing a software reboot RB4011iGS+5HacQ2HnD locks me up again. All sfp+ ports are on default settings.
Similar issue on RB4011 - SFP+ 10G Copper.. had to disable/enable/change auto to hard code and back again a few times then it would work fine. (did try cold reboot as you did)
 
Rox169
Member Candidate
Member Candidate
Posts: 163
Joined: Sat Sep 04, 2021 1:47 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 8:03 am

*) netinstall - fixed Netinstall procedure for ARM devices;
Is the netinstall necessary or it is enough only when I flash this firmware?
 
User avatar
nichky
Forum Guru
Forum Guru
Posts: 1092
Joined: Tue Jun 23, 2015 2:35 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 9:21 am

how to get to :

*) dns - added "address-list" parameter for static DNS entries (CLI only);
*) dns - added "match-subdomain" option for static entries (CLI only);
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 10:02 am

@Guntis
so that one will have effect only if the channel is auto , if i specify it, then there is no point using that , am i correct?
I'm not @Guntis, but if is only one channel in list, is useless, but if you set two or more channels on list, the choice is made on the better on that list.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 10:07 am

*) netinstall - fixed Netinstall procedure for ARM devices;
@LonDat, @Rox169
Is a fix inside the Netinstall program, that do not work correctly with some arm device.
Is not needed to netinstall the RouterBOARD or upgrade RouterOS for this program bug.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
infabo
Member
Member
Posts: 310
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 11:04 am

Chateau LTE12, hap lite and map lite -> updated without issues.
 
User avatar
raimondsp
MikroTik Support
MikroTik Support
Posts: 214
Joined: Mon Apr 27, 2020 10:14 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 11:44 am

*) l3hw - fixed HW offloaded NAT;
Interesting, on my CCR2116 l3hw nat was working fine for me before 7.5. Post 7.5 traffic that is natted has high % drop rate so high not even a TLS session can establish. Disabling l3hw removes the packet loss behavior.
I confirmed this on my 2115 as well. L3HW switching was enabled on the switch and NAT worked prior to 7.5. After upgrade NAT was broken until I disabled L3HW switching on the switch.

Before 7.5, FastTrack NAT connections could be reported as hw-offloaded despite still getting processed by the CPU. In 7.5 those are actually hw-offloaded. Maybe the problem is that the hardware cannot handle some types of connections (e.g. a tunneled connection), so those shouldn't be offloaded in the first place. Please create a support ticket, so we can investigate the problem.
 
User avatar
raimondsp
MikroTik Support
MikroTik Support
Posts: 214
Joined: Mon Apr 27, 2020 10:14 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 11:52 am

VRRP issues between a setup with an x86 & CCR2004 master/slave preemptive setup on 7.5 (both devices) - both nodes showing master, packet sniffing confirms all traffic including broadcast is seen by both nodes.

I wanted to start debugging this outside production on pair lab HEXs - both on 7.5, both fresh barebones configs - ended up with a completely different VRRP problem - vrrp IP and vrrp interfaces stay in invalid state on both routers despite valid shared /32 address in the same address space as the parent interface.. was using ether3 on both lab hex routers connected directly.

So, VRRP seems a little janky on 7.5

Are you using sync-connection-tracking=yes? We have identified the issue where sync-connection-tracking didn't work on HEX (and on any MIPS device); the fix will be released in the next beta.

Regarding the VRRP setup between x86 and CCR2004, please post your "/interface export" and "/ip export" configurations from both devices. I suggest creating a separate forum thread here.
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 12:40 pm

Updated to 7.5 stable and have issue with sfp+. Every time I software reboot RB4011iGS+5HacQ2HnD, I keep getting "sfpplus1 fcs error on link" on sfpplus1 of CCR1016-12S-1S+. Winbox is connected to CCR1016-12S-1S+ as its the main router that everything connects to. The way to fix RB4011iGS+5HacQ2HnD is by hard rebooting with complete power loss for 10+ seconds. Doing a software reboot RB4011iGS+5HacQ2HnD locks me up again. All sfp+ ports are on default settings.
Similar issue on RB4011 - SFP+ 10G Copper.. had to disable/enable/change auto to hard code and back again a few times then it would work fine. (did try cold reboot as you did)
Sorry, but I can´t agree. My RB4011iGS+5HacQ2HnD is connected via SFP+ with my CRS326-24S+2Q+ with an MikroTik DAC-Cable and regardless if I soft- or hardreboot my device the SFP+ connection came up without any issues.
So maybe it´s a device specific problem with your CCR or with your SFP+ GBIC.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2364
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 1:01 pm

Hello. CubeG-5ac60ay with 7.5 as client = kernel failure every minute.
After downgrade to 7.4.1 = everything OK

ticket: SUP-91404
 
hecatae
Member Candidate
Member Candidate
Posts: 209
Joined: Thu May 21, 2020 2:34 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 1:01 pm

Hap AC Lite upgraded without issues.
Anyone upgraded a RB2011 or RB3011 yet?
 
User avatar
jvanhambelgium
Forum Veteran
Forum Veteran
Posts: 824
Joined: Thu Jul 14, 2016 9:29 pm
Location: Belgium

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 1:42 pm

Yep, RB3011 went OK.
Only 1 PPPoE to ISP , no complex setup, no routing-protocols etc. Typical home-usage.
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 184
Joined: Wed Aug 09, 2017 1:15 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 2:01 pm

2x CubeG-5ac60ad constantly rebooting every 1-3 Minutes, both upgraded from 7.4.1 to 7.5.
EDIT: The issue seems to be related to the W60G interface, once disabled, the reboots stop.
Downgraded to 7.4.1 and devices are stable again with W60G interface enabled.
Last edited by osc86 on Thu Sep 01, 2022 3:07 pm, edited 2 times in total.
 
User avatar
vecernik87
Forum Veteran
Forum Veteran
Posts: 867
Joined: Fri Nov 10, 2017 8:19 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 2:04 pm

Updated to 7.5 stable and have issue with sfp+.

Similar issue on RB4011 - SFP+ 10G Copper..


I just had similar (although not same) experience. CRS328-24P-4S+ upgraded from 7.4 to 7.5. After reboot, SFP+ (FS SFP-10GSR-85) said Link OK and showed both RX and TX traffic. However, on the other end there was no RX traffic!

I tried to enable/disable the port on both ends, change autonegotiation to manual and back, reboot the switch few times and then downgrade back to 7.4 , but there was no change - still broken. So I physically removed the SFP module, plugged it into next SFP+ port and it started working. Plugged it back, it still works. Second time upgraded and it did not break.

Since RouterOS was claiming there are TX data but the other side didn't see any RX, I am assuming there was an issue with the SFP+ module itself. Possibly some random fail during initialization after the upgrade? Definitely worth looking into because it shouldn't report "link ok" if the link isn't in fact ok.

Anyway, I would not recommend other people to upgrade remote devices which rely on SFP ports. If you think that another link with RSTP failover will save you - you are wrong. In my case, the affected switch was further from root switch, so the broken SFP was the root uplink. Affected switch thought it works fine (because it saw RX and TX packets) so it disabled alternate uplinks and essentially cut itself from the the rest of the network.
Last edited by vecernik87 on Thu Sep 01, 2022 2:19 pm, edited 3 times in total.
 
hecatae
Member Candidate
Member Candidate
Posts: 209
Joined: Thu May 21, 2020 2:34 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 2:07 pm

Hello. CubeG-5ac60ay with 7.5 as client = kernel failure every minute.
After downgrade to 7.4.1 = everything OK

ticket: SUP-91404
I take it this was both RouterOS and Routerboard updated to 7.5?
 
Rox169
Member Candidate
Member Candidate
Posts: 163
Joined: Sat Sep 04, 2021 1:47 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 2:08 pm

2x CubeG-5ac60ad constantly rebooting every 1-3 Minutes, both upgraded from 7.4.1 to 7.5.
It is sad to see, that MK is not testing new "STABLE" version again after recently bricked soo many devices....
 
hoeser
just joined
Posts: 16
Joined: Wed Jan 13, 2021 5:45 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 3:59 pm


Are you using sync-connection-tracking=yes? We have identified the issue where sync-connection-tracking didn't work on HEX (and on any MIPS device); the fix will be released in the next beta.

Regarding the VRRP setup between x86 and CCR2004, please post your "/interface export" and "/ip export" configurations from both devices. I suggest creating a separate forum thread here.
Neither setup was using connection tracking.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 4:07 pm

Issue showing uptime and Remote ID of BGP SESSIONS after upgrading to 7.5
This problem was introduced in the 7.5beta and reported, but it has been ignored so now it ends up in the "stable" release...
 
iliyah
just joined
Posts: 1
Joined: Tue Feb 18, 2020 1:31 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 5:44 pm

powerpc - after the upgrade from v7.4.1, the router drops all incoming vpn connection every 5 minutes or so.
 
sterod
just joined
Posts: 22
Joined: Sat Oct 13, 2018 12:13 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 8:07 pm

All devices with ARM cpu's are coming up at the wrong frequency after the 7.4.1 to 7.5 upgrade. You see this in the System / RouterBOARD menu. A warning appears that the cpu is not running at the default frequency. Clicking on the "Settings" button, you see it is incorrectly set to 716MHz and needs to be manually changed back to auto.
 
kalamaja
Frequent Visitor
Frequent Visitor
Posts: 91
Joined: Wed May 23, 2018 3:13 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 8:13 pm

*) webfig - fixed displaying of grahs in status pages
Progress, but you still have work to do. Memory usage and Disk usage gives: ERROR: NO ACCESS!
CPU usage is fine and interfaces.
I have opposite situation with hEX S at 7.5: HDD and Memory available, but CPU missing from Resource Graphs and webfig gives "no access" to CPU.
 
lelmus
newbie
Posts: 28
Joined: Wed Oct 17, 2012 5:50 am

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 8:32 pm



Similar issue on RB4011 - SFP+ 10G Copper.. had to disable/enable/change auto to hard code and back again a few times then it would work fine. (did try cold reboot as you did)
Sorry, but I can´t agree. My RB4011iGS+5HacQ2HnD is connected via SFP+ with my CRS326-24S+2Q+ with an MikroTik DAC-Cable and regardless if I soft- or hardreboot my device the SFP+ connection came up without any issues.
So maybe it´s a device specific problem with your CCR or with your SFP+ GBIC.

Good point, maybe its the SFP+ module brand I'm using as they are not a Mikrotik brand and probably don't get tested at Mikrotik. The SFP+ I'm using at both ends the Maxxwave MW-SX+MM-US. But it worked perfect all these years till the moment of the latest 7.5 [stable] update, so it only makes sense its a bug since 7.5beta11 worked perfectly.

Maxxwave site claims MIkrotik compatibility on this SFP+ module: https://www.maxxwave.com/portfolio/mult ... er-module/
Last edited by lelmus on Fri Sep 02, 2022 1:51 am, edited 5 times in total.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 8:42 pm

All devices with ARM cpu's are coming up at the wrong frequency after the 7.4.1 to 7.5 upgrade. You see this in the System / RouterBOARD menu. A warning appears that the cpu is not running at the default frequency. Clicking on the "Settings" button, you see it is incorrectly set to 716MHz and needs to be manually changed back to auto.
I'm not seeing that on hap ac3 coming from 7.4.1, nor on ac3 coming from 7.5rc2 (which also was on 7.4.1 some versions before).
Maybe you never set it to auto before when this was introduced ?
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2364
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 9:03 pm

Hello. CubeG-5ac60ay with 7.5 as client = kernel failure every minute.
After downgrade to 7.4.1 = everything OK

ticket: SUP-91404
I take it this was both RouterOS and Routerboard updated to 7.5?
YES. Problem is only if CubePRO is in station bridge mode. AP mode works.
@mikrotik.com It is so hard to test before you release it to the world?

Please add warning to changelog and download page.

Remote downgrade is not possible. You need to connect via ETH. Turn off the w60g interface and then downgrade
 
templeos
just joined
Posts: 17
Joined: Mon Aug 26, 2019 3:58 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 9:32 pm


Progress, but you still have work to do. Memory usage and Disk usage gives: ERROR: NO ACCESS!
CPU usage is fine and interfaces.
I have opposite situation with hEX S at 7.5: HDD and Memory available, but CPU missing from Resource Graphs and webfig gives "no access" to CPU.
Yes. I saw another topic that is pretty much the same like yours, but that was on a RB750Gr3 on RouterOS v7.1.3. -> viewtopic.php?p=954791
So it must be related. After an upgrade it breaks graphs.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 9:38 pm

The graphs work fine here. For such cases of strange behavior that other people do not see, I advise jumping through the export-netinstall-import hoop.
 
rb9999
just joined
Posts: 23
Joined: Thu Dec 06, 2018 3:09 pm

Re: v7.5 [stable] is released!

Thu Sep 01, 2022 11:45 pm

Upgraded about 5 hapac2 from 7.1.5 and 7.4.1 to 7.5 - they all seem up and running, will test out rtsp helper tomorrow, can't wait!
 
yo3gjc
just joined
Posts: 12
Joined: Sat Mar 05, 2011 4:30 pm
Location: Mississauga ON

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 2:51 am

Upgraded for v741 to v75 and Mikrotik IKEv2 stop working after few minutes. Active peer up but no traffic
 
User avatar
nichky
Forum Guru
Forum Guru
Posts: 1092
Joined: Tue Jun 23, 2015 2:35 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:29 am

since we got new feature with vrrp "sync-connection-tracking=yes"

what/where do we need to see that to confirm that sync-connection-tracking=yes it works.
 
User avatar
honeyfairy
newbie
Posts: 31
Joined: Sat Nov 21, 2020 1:25 am
Contact:

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 9:37 am

BGP Session uptime bug in this version!
 
buset1974
Frequent Visitor
Frequent Visitor
Posts: 79
Joined: Wed Sep 13, 2006 12:12 pm
Location: Jakarta

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 9:48 am

For my mpls + bgp network, for safety ikeep stay on 6.49.x
My CCR2004 only test bench, so unused
To much hoping
 
chiem
newbie
Posts: 38
Joined: Fri Oct 24, 2014 4:48 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 10:01 am

how to get to :

*) dns - added "address-list" parameter for static DNS entries (CLI only);
*) dns - added "match-subdomain" option for static entries (CLI only);
match-subdomain was demonstrated here: viewtopic.php?t=187950#p948005

It's the same functionality as using a regex, but I suppose it's a little cleaner.

I still haven't seen "address-list" demonstrated.

It would be nice if there was official documentation on these features.
 
abdurrazaqa
just joined
Posts: 15
Joined: Wed Jan 11, 2017 10:40 am
Contact:

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 10:51 am

Hi,
Please check on the all the Ros7 on RB1100AH*2 showing duplicates of ethernet 13 on interface real name
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 10:54 am

@Maggiore81 / @eworm

Don't pollute this topic. Open a separate topic for installation package assistance, or better use search, and you'll find dozens of similar cases.
But what @Znevna suggest is right: do not upgrade remotely from v6 to v7...
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
revellion
just joined
Posts: 13
Joined: Thu Nov 10, 2011 9:53 pm
Location: Sweden

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 11:24 am

2x CubeG-5ac60ad constantly rebooting every 1-3 Minutes, both upgraded from 7.4.1 to 7.5.
EDIT: The issue seems to be related to the W60G interface, once disabled, the reboots stop.
Downgraded to 7.4.1 and devices are stable again with W60G interface enabled.
I have a similar issue with a pair of wireless wire that started to get flaky after upgrading from 7.4.1 to 7.5. gonna test a downgrade with netinstall today and see

Edit: downgraded to 7.4.1 with netinstall and the link is stable again.
Last edited by revellion on Fri Sep 02, 2022 2:18 pm, edited 1 time in total.
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 548
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 11:39 am

Mikrotik devs, please .. bring back the useful [ /ip route check x.x.x.x ] command (or tell us how to do the same in v7).
Thanks


EDIT:
feature request ticket opened
SUP-91496
Last edited by rextended on Fri Sep 02, 2022 12:22 pm, edited 2 times in total.
Reason: SUP-91496
 
DL7JP
Frequent Visitor
Frequent Visitor
Posts: 85
Joined: Sat Oct 19, 2013 4:14 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 2:10 pm

All devices with ARM cpu's are coming up at the wrong frequency after the 7.4.1 to 7.5 upgrade. You see this in the System / RouterBOARD menu. A warning appears that the cpu is not running at the default frequency. Clicking on the "Settings" button, you see it is incorrectly set to 716MHz and needs to be manually changed back to auto.
My hAP ac^2 (arm) came back with "auto".
 
roe1974
Member Candidate
Member Candidate
Posts: 145
Joined: Mon Dec 31, 2018 2:14 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 2:55 pm

Hi !
Anyone tested allready if ovpn ist stable now with this version ?
thx, Richard
 
User avatar
swa69er
just joined
Posts: 15
Joined: Sat Jan 02, 2021 11:54 am

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 2:56 pm

RB5009UGS v7.4.1 to v7.5 so far so good. no issue at the moment
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:16 pm

This is really getting stale .... after upgrading Audience with wifiwave2 package from 7.4.1 to 7.5:
  MikroTik RouterOS 7.5 (c) 1999-2022       https://www.mikrotik.com/

Press F1 for help
sep/02/2022 16:13:17 system,error,critical error while running customized default configuration script: bad command name wireless (line 985 column 25)
sep/02/2022 16:13:17 system,error,critical

Is this really so hard to fix?
 
User avatar
mozerd
Forum Veteran
Forum Veteran
Posts: 805
Joined: Thu Oct 05, 2017 3:39 pm
Location: Canada
Contact:

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:18 pm

CCR1009 ... upgrade from 7.4.1 to 7.5 stable

Under Winbox v3.37
Disks do not show the installed number of Disks .... attached image shows that under Files does show the proper number of disks but under Disks only 2 disks are visible
disks.GIF
Disk2 is USB and named Disk2 but as shown in screen shot as directory
You do not have the required permissions to view the files attached to this post.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:23 pm

Is this really so hard to fix?
There is an option to retrieve the script being used at startup, I believe ?
You should be able to see specifically what the error is about since the exact location has been mentioned ?
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:30 pm

Is this really so hard to fix?
There is an option to retrieve the script being used at startup, I believe ?
You should be able to see specifically what the error is about since the exact location has been mentioned ?

No need to dig into it, error message says it loud and clear:
bad command name wireless

If wifiwave2 package is installed, then /interface/wireless disapears and /interface/wifiwave2 appears. So it's only necessary to wrap the legacy wireless setup with check whether legacy wireless exists or not.

My question was rather rhetorical one.
Last edited by mkx on Fri Sep 02, 2022 5:32 pm, edited 1 time in total.
 
User avatar
CTassisF
newbie
Posts: 26
Joined: Thu Jun 11, 2020 10:26 pm
Location: São Paulo, Brazil
Contact:

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:31 pm

Is this really so hard to fix?
There is an option to retrieve the script being used at startup, I believe ?
You should be able to see specifically what the error is about since the exact location has been mentioned ?

It is probably the router trying to load the default configuration for /interface wireless which can't be done when WifiWave2 (/interface wifiwave2) is installed.
This issue was fixed some time ago in 7.5beta4 so I guess it won't happen from now on.
It's just a warning anyway. Annoying, yes, but nothing dangerous.
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:35 pm

This issue was fixed some time ago in 7.5beta4 so I guess it won't happen from now on.

So when can I expect the fix to kick in? I did a couple of reboots after installing 7.5 (if not for other things to bring routerboot version up) and the message is shown every time ... my feelingnis that this fix is one of those that need to be included in several ROS releases before they're done correctly.
Last edited by mkx on Fri Sep 02, 2022 5:36 pm, edited 2 times in total.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:36 pm

My question was rather rhetorical one.
I know it's already a long standing one waiting for an answer :lol:
 
User avatar
CTassisF
newbie
Posts: 26
Joined: Thu Jun 11, 2020 10:26 pm
Location: São Paulo, Brazil
Contact:

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 5:47 pm

This issue was fixed some time ago in 7.5beta4 so I guess it won't happen from now on.

So when can I expect the fix to kick in? I did a couple of reboots after installing 7.5 (if not for other things to bring routerboot version up) and the message is shown every time ... my feelingnis that this fix is one of those that need to be included in several ROS releases before they're done correctly.

I don't know, I don't have an Audience device. But this same issue used to happen to me on my hAP ac3 every so often when upgrading from one v7 to another and I haven't seen it happening again for quite some time now.

I guess doing netinstall can help in these cases (to wipe old, hidden on export configurations). Maybe an /export show-sensitive file=export + /system/reset-configuration run-after-reset=export.rsc can help too.
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 6:02 pm

I guess doing netinstall can help in these cases (to wipe old, hidden on export configurations).
Perhaps. I did netinstall when first installing v7 on this device (I think it was 7.1rc2 or something) so no v6 config lingering in backgroud.
Not sure if it would work in this case though ... message clearly says it's "customized default script" doing it and AFAIK that's script which is "burned in" with netinstall. But I never installed anything like that hence it must be MT's script. Could be that issue would not arise if wifiwave2 package was installed as a part of netinstall process (it is possible to upload multiple packages) but I kind of doubt it.
 
User avatar
Znevna
Forum Guru
Forum Guru
Posts: 1122
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 6:10 pm

CCR1009 ... upgrade from 7.4.1 to 7.5 stable

Under Winbox v3.37
Disks do not show the installed number of Disks .... attached image shows that under Files does show the proper number of disks but under Disks only 2 disks are visible
disks.GIF

Disk2 is USB and named Disk2 but as shown in screen shot as directory
How is Disk2 and Disk3 connected?
You only seem to have one usb device connected with one partition.
 
User avatar
mozerd
Forum Veteran
Forum Veteran
Posts: 805
Joined: Thu Oct 05, 2017 3:39 pm
Location: Canada
Contact:

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 7:05 pm

How is Disk2 and Disk3 connected?
You only seem to have one usb device connected with one partition.
Good catch Znevna …. In fact disk3 is microSD card and disk2 is microUSB …..
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 8:09 pm

This is really getting stale .... after upgrading Audience with wifiwave2 package from 7.4.1 to 7.5:
[...]
Is this really so hard to fix?
@mkx
Please attach the txt files obtained on this way:
/system default-configuration print file=defaultconfigscripts
thanks.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 8:20 pm

When I last tried that on v7.5 (and now also on v7.6 beta) it said:
error - contact MikroTik support and send a supout file (10)
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 8:26 pm

??? ah...

I tested on 7.2.1 and it works (no wifiwave2 package, is one RB5009 on production)
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 9:29 pm

/system default-configuration print file=defaultconfigscripts

Currently I'm on my phone so it's not easy to attach output of command above. But guess what? Command produces only 203 lines whereas error message mentions line 985 ...
 
theosoft
just joined
Posts: 10
Joined: Fri Jan 27, 2017 5:48 pm

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 10:01 pm

RB5009 running 7.5. I prepared installation for 7.6 Beta. I copied the running partion to backup.
I saw strange percentages in progress bar. finaly at 760% copy progress finished :-)
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Fri Sep 02, 2022 10:33 pm

@mkx

I sense it is time to netinstall again...
 
elgrandiegote
newbie
Posts: 40
Joined: Tue Feb 05, 2013 6:02 am
Location: Buenos Aires, Argentina

Re: v7.5 [stable] is released!

Sat Sep 03, 2022 1:09 am

Hi !
Anyone tested allready if ovpn ist stable now with this version ?
thx, Richard

ovpn udp, the client disconnects and the server (mikrotik) never drops the connection, even for hours...
 
guipoletto
Member Candidate
Member Candidate
Posts: 174
Joined: Mon Sep 19, 2011 5:31 am

Re: v7.5 [stable] is released!

Sat Sep 03, 2022 2:46 am

*) interface - fixed default interface naming on RB1100x2;

<< i'm having trouble testing this one

on a RB1100AHX2 running 7.4, the total used disk space is 43.5MB, leaving 20.5Mb free, when 20.6 are required for the update

/export yields a 12K file, and the backup file is 340K (not that big...) and /files is clean (deleted all old backups and export files)

any suggestions? (except Netinstall)
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Sat Sep 03, 2022 3:25 am

@mkx
sep/02/2022 16:13:17 system,error,critical error while running customized default configuration script: bad command name wireless (line 985 column 25)
sep/02/2022 16:13:17 system,error,critical
When the "get-custom-defconf" is interrupted for some reason, the "flag" get-custom-defconf runned successfully is not set, and everytime at reboot it try to run the script,
is why everytime, for every reboot, you get that error.
(The error is on the file "get-custom-defconf" on system package, not on wifiwave2 package)


MikroTik Staff, please, deliver to who manage the get-custom-defconf script this message:

   # wait wlan3 it takes 7sec slower to load than wlan1/2 on Audience
    $addCL ("  :local count 0;")
    $addCL ("  :while ([/interface wireless find default-name=\"wlan3\"] = \"\") do={ ")
    $addCL ("    :if (\$count = 15) do={")
    $addCL ("      :log warning \"DefConf: Unable to find wlan3 interface\";")
    $addCL ("      /quit")
    $addCL ("    }")
    $addCL ("    :delay 1s; :set count (\$count +1);")
    $addCL ("  };")

    # TODO: set band and ext, probably use setWlan function
    $addCL ("  /interface wireless {")
    $addCL ("    :local wl3 [find default-name=\"wlan3\"]")
    $addCL ("    :local wlanMac  [get \$wl3 mac-address];")
    $addCL ("    :set ssid \"SYNC-\$[:pick \$wlanMac 9 11]\$[:pick \$wlanMac 12 14]\$[:pick \$wlanMac 15 17]\"")
    $addCL ("    set \$wl3 disabled=no mode=ap-bridge band=5ghz-a/n/ac ssid=\$ssid security-profile=wpsSync wps-mode=push-button")
    # set channnel width 20/40/80mhz-XXXX (russia 20/40mhz-XX)


<<< LINE 983 >>>    # wait wlan3 it takes 7sec slower to load than wlan1/2 on Audience
    :local count 0;
<<< @mkx LINE 985 >>>    :while ([/interface wireless find default-name="wlan3"] = "") do={
      :if ($count = 30) do={
        :log warning "DefConf: Unable to find wlan3 interface";
        /quit
      }
      :delay 1s; :set count ($count +1);
    };

<<< LINE 993 >>>    :local hwInfo [/interface wireless info hw-info [.. find where default-name="wlan3"] as-value];
      $addDL ("#|     channel-width: 20/40mhz-XX;")
<<< LINE 995 >>>      $addCL ("    set \$wl3 channel-width=20/40mhz-XX")
    $addCL ("  };")
}
Accidentally the already converted block was not deleted, old code and unused chunks were left from line 983 to line 995.
[Also on line 993 is present a useless local variable (never used anywhere) that give error, becase call directly /int wireless for set his value]

Simply deleting the lines from 983 to 995 solve the Audience problem.

Thanks.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
roe1974
Member Candidate
Member Candidate
Posts: 145
Joined: Mon Dec 31, 2018 2:14 pm

Re: v7.5 [stable] is released!

Sat Sep 03, 2022 8:32 am

Hi !
Anyone tested allready if ovpn ist stable now with this version ?
thx, Richard

ovpn udp, the client disconnects and the server (mikrotik) never drops the connection, even for hours...
.... means the connection stays open at the mikrotik router (ovpn server) even if the client disconnect ?
 
mobyfab
just joined
Posts: 5
Joined: Tue Jul 03, 2018 4:45 pm
Location: France

Re: v7.5 [stable] is released!

Sat Sep 03, 2022 1:37 pm



I confirmed this on my 2115 as well. L3HW switching was enabled on the switch and NAT worked prior to 7.5. After upgrade NAT was broken until I disabled L3HW switching on the switch.

Before 7.5, FastTrack NAT connections could be reported as hw-offloaded despite still getting processed by the CPU. In 7.5 those are actually hw-offloaded. Maybe the problem is that the hardware cannot handle some types of connections (e.g. a tunneled connection), so those shouldn't be offloaded in the first place. Please create a support ticket, so we can investigate the problem.
I'm having the same issue. Those connections were definitely offloaded (no cpu activity at high rates) before and worked fine.
 
elgrandiegote
newbie
Posts: 40
Joined: Tue Feb 05, 2013 6:02 am
Location: Buenos Aires, Argentina

Re: v7.5 [stable] is released!

Sat Sep 03, 2022 7:29 pm




ovpn udp, the client disconnects and the server (mikrotik) never drops the connection, even for hours...
.... means the connection stays open at the mikrotik router (ovpn server) even if the client disconnect ?
yes, even with the option explicit-exit-notify 1
the server does not drop the connection and the client when reconnecting gives an error that it is already in use
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Sat Sep 03, 2022 7:59 pm

I would not recommend mixing the use of OpenVPN with MikroTik OVPN. It is not the same thing. And it is not tracking the releases of the real thing.
It seems better to run a small container with the real OpenVPN software.
 
User avatar
rumahnetmks
newbie
Posts: 26
Joined: Mon Dec 21, 2020 10:00 am

Re: v7.5 [stable] is released!

Sun Sep 04, 2022 2:39 pm

hapAC3 upgrade works fine, no noticeable error so far.
Time to test Container ^_^
 
Rox169
Member Candidate
Member Candidate
Posts: 163
Joined: Sat Sep 04, 2021 1:47 am

Re: v7.5 [stable] is released!

Sun Sep 04, 2022 4:03 pm

no need to quote preceding post - use "Post Reply"
Hi,

im just wondering which container app will you try? Hap AC3 has limited cpu power..
 
gaid78
just joined
Posts: 14
Joined: Fri Apr 24, 2015 10:58 am

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 9:11 am

Image

marked this one device
 
ssbaksa
newbie
Posts: 31
Joined: Tue Oct 20, 2015 10:38 am

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 11:06 am

Hi,
I have successfully updated few CRS226-24G-2S+, and RBwAPR-2nD, 2011UiAS-2HnD, CRS326-24G-2S+ but my RB1200 doesn't "like" this update. It shows it as available but that's it. Update process can't find it on-line. I can do it manually but ...

[admin@ko4-mt-internet-1] /system package update> check-for-updates
channel: upgrade
installed-version: 6.49.6
latest-version: 7.5
status: New version is available
[admin@ko4-mt-internet-1] /system package update> install
channel: upgrade
installed-version: 6.49.6
latest-version: 7.5
status: routeros-powerpc-7.5.npk missing, use ignore-missing or disable package(s)
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 11:58 am

This has happened in the past because of a change in naming convention and it was specifically on powerpc if my memory serves me well (why on earth they decided to do that eludes me. At least they could have foresee a shortcut-link to the old naming for these cases :rolleyes: ).
Since you move from 6.xx to 7.xx this might very well be the problem here.

Can you update manually ?
Subsequent versions should go fine then.
 
User avatar
jbl42
Member Candidate
Member Candidate
Posts: 155
Joined: Sun Jun 21, 2020 12:58 pm

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 12:00 pm

Updated two RB4011 and one RB5009 in our testlab and one RB5009 at my home network 7.4.1 -> 7.5 without issues so far.
Used features: intra VLAN routing (no BGP/OSPF) with srcNAT towards WAN, bridging 5-7 VLANs with HW filtering, 30-50 FW rules, some simple queues, NTP server/client, DHCP server/client, IPsec, Wireguard
 
User avatar
Nevon
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Thu Sep 05, 2013 6:06 pm
Location: Sweden
Contact:

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 12:07 pm

Upgraded a CRS354-48P-4S+2Q+RM MLAG paired stack. After this weekend customer reported extreme slow network speed.
Made a return to 7.2.3 and now everything works again.

I made a ticket with Mikrotik support last week when we ran into a problem on SW02 in the MLAG stack where port 1-12 stopped working for some users. I was recommended to upgrade to 7.5. I did this this weekend and today I got the from the customer that network was slow. I tried to pinpoint the problem. Made 2-3 speedtest from servers and had full speed. But traffic internal like SQL, SMB and RDP where very slow. At some time my winbox timed out towards both switches. When I connected to the switches with mgmt on bridge it was also slow and hard to download and upload files.
Connected with cable to MGMT port and MAC adress then it was OK. Didn't have time for more so I downgraded to 7.2.3 that we had been running for some months before without problems.
Last edited by Nevon on Mon Sep 05, 2022 12:58 pm, edited 1 time in total.
 
Dude2048
Member Candidate
Member Candidate
Posts: 199
Joined: Thu Sep 01, 2016 4:04 pm

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 12:11 pm

Can you elaborate on that problem?
 
Rox169
Member Candidate
Member Candidate
Posts: 163
Joined: Sat Sep 04, 2021 1:47 am

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 12:44 pm

Hi,

Still no fix for 60 GHz devices? No info in firmware log to warn users with those devices?
 
User avatar
Nevon
Frequent Visitor
Frequent Visitor
Posts: 69
Joined: Thu Sep 05, 2013 6:06 pm
Location: Sweden
Contact:

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 12:58 pm

Can you elaborate on that problem?
Updated my ticket.
 
ruwi000
just joined
Posts: 13
Joined: Fri Apr 24, 2015 5:39 pm

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 5:50 pm

how to get to :

*) dns - added "address-list" parameter for static DNS entries (CLI only);
*) dns - added "match-subdomain" option for static entries (CLI only);
match-subdomain was demonstrated here: viewtopic.php?t=187950#p948005

It's the same functionality as using a regex, but I suppose it's a little cleaner.

I still haven't seen "address-list" demonstrated.

It would be nice if there was official documentation on these features.
Could address-list be related to views in DNS? Different clients getting different answers?
 
User avatar
benlg
just joined
Posts: 8
Joined: Mon Jan 31, 2022 2:50 pm

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 5:58 pm

Upgraded a CRS354-48P-4S+2Q+RM MLAG paired stack. After this weekend customer reported extreme slow network speed.
Made a return to 7.2.3 and now everything works again.
What about 7.4.1 ?
 
User avatar
armandfumal
Member Candidate
Member Candidate
Posts: 152
Joined: Wed Apr 25, 2012 5:50 pm
Location: Weiswampach,LUX
Contact:

Re: v7.5 [stable] is released!

Mon Sep 05, 2022 11:25 pm

Issue showing uptime and Remote ID of BGP SESSIONS after upgrading to 7.5
This problem was introduced in the 7.5beta and reported, but it has been ignored so now it ends up in the "stable" release...
same issue CCR2216....crazy to have bug like this,..Is it me or BGP is not an important protocol to be first running correctly on V7 ?
 
User avatar
spippan
Member Candidate
Member Candidate
Posts: 133
Joined: Wed Nov 12, 2014 1:00 pm

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 1:26 am



This problem was introduced in the 7.5beta and reported, but it has been ignored so now it ends up in the "stable" release...
same issue CCR2216....crazy to have bug like this,..Is it me or BGP is not an important protocol to be first running correctly on V7 ?
hope this gets sorted soon
have some tiks and ~4-6 bgp sessions to manage and still no correct "prefix counter"
 
Sob
Forum Guru
Forum Guru
Posts: 8958
Joined: Mon Apr 20, 2009 9:11 pm

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 2:55 am

Could address-list be related to views in DNS? Different clients getting different answers?
No, it adds resolved addresses to address list. AFAIK there's still no official documentation, so check this: viewtopic.php?p=952360#p952360
 
User avatar
rumahnetmks
newbie
Posts: 26
Joined: Mon Dec 21, 2020 10:00 am

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 8:47 am

no need to quote preceding post - use "Post Reply"
Hi,

im just wondering which container app will you try? Hap AC3 has limited cpu power..
Hi there. I will try hAP-AC3 with pihole or AdGuard. This router is just for a small home network (really small network :D).
Since from mikrotik manual help page mention about its better to have different storage for the container, hAP-AC3 i think better with its USB port (will use USB to Sata3 SSD).
Moreover I'm just a noob that try to learn :D

Ah. Later I check adguard need min 256MB RAM while pihole 512MB. Sadly hAPAC3 only 256MB RAM...
Too much if have to switch to RB5009, while AX2 dont have USB.
Will wait for AX3 (pls have USB3 :D)
Last edited by rumahnetmks on Tue Sep 06, 2022 11:16 am, edited 1 time in total.
 
ssbaksa
newbie
Posts: 31
Joined: Tue Oct 20, 2015 10:38 am

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 9:14 am

This has happened in the past because of a change in naming convention and it was specifically on powerpc if my memory serves me well (why on earth they decided to do that eludes me. At least they could have foresee a shortcut-link to the old naming for these cases :rolleyes: ).
Since you move from 6.xx to 7.xx this might very well be the problem here.

Can you update manually ?
Subsequent versions should go fine then.
With manual package upload and reboot it works just fine. There was no problem with version change but since this is spare/test router I didn't expect problems.
I couldn't say the same for updating main one because I am reluctant to try it for now. That one is essential and I must get permission for update/reboot.

Well, name change! Huh! Why would you do that? There should be a symlink or something like that to ease transition.

Tnx for pointing me to right direction.
 
ttrs
just joined
Posts: 12
Joined: Sun Feb 24, 2019 11:21 am

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 1:13 pm

Openvpn mikrotik-to-mirkotik is still not tested before stable releases and is not working, since 7.4 viewtopic.php?t=187760#p946943

EDIT: must be verified: viewtopic.php?p=955836#p955836
Last edited by rextended on Wed Sep 07, 2022 11:47 am, edited 2 times in total.
 
User avatar
PUDIS
just joined
Posts: 6
Joined: Fri Oct 25, 2019 8:35 am

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 5:44 pm

After upgrade CCR1016 from V6.49.6 to V7.5 - IPsec NAT not working anymore!
Downgrade back to 6.49.6 ... and working again
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 5:46 pm

This is too general, it may depend on how you have configured the device.
There have been many changes from 6.x to 7.x, especially in BGP and Routing,
which probably make the configuration incompatible with what you expect.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
mmc
newbie
Posts: 39
Joined: Wed Dec 29, 2004 1:44 am

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 6:11 pm

ros 7.5 stable breaks pppoe / l2tp with ip pool.

the used ip pool adresses never get released when a ppp session ends. after a while (two days) the whole pppoe server crashed with the log message 'cannot create service connection'. a downgrade to 7.4.1 fixed the problem...
 
kenyloveg
Frequent Visitor
Frequent Visitor
Posts: 85
Joined: Tue Jul 14, 2009 3:25 pm

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 6:35 pm

According the help page
https://help.mikrotik.com/docs/display/ROS/Container
/container/set 0 start-on-boot=yes
while i get bad command
 
johnson73
Frequent Visitor
Frequent Visitor
Posts: 79
Joined: Wed Feb 05, 2020 10:07 am

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 6:49 pm

after upgrade from v6.49.6 to v7.5 on CCR1009 without problems.
I wonder why the new Ros v7 consumes so much more memory? For example, on the CCR1009 router with v.6.49.6, the ram consumption was around 740MiB at medium load
With version v7.5 ram already shows 670 MiB. What if I put this version on hAP lite which has only 32Mib total memory? Will he be able to work with this?
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 6:51 pm

It is not advisable to install RouterOS v7 on a hAP lite or hAP mini.
 
marlab
just joined
Posts: 19
Joined: Sun Mar 15, 2015 2:48 pm
Location: EU

Re: v7.5 [stable] is released!

Tue Sep 06, 2022 11:10 pm

Is anyone else having problems with Capsman? With 7.5 I had to give up using Capsman, as the speed with hap ac2 access points went down to 30 Mbps... :/ The same devices without Capsman are easily reaching over 250 Mps... Capsman is installed on the main router, RB4011, I use vlans, so I do not see a reason for such a drastic drop in wireless speed.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 1:46 am

Too many other variables which might be responsible for that speed drop instead of blaming capsman.
Best to start a separate thread and post your config so it can be inspected.
 
nclmrc
just joined
Posts: 2
Joined: Sat Aug 24, 2019 2:33 am

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 9:27 am

Is anyone else having problems with Capsman? With 7.5 I had to give up using Capsman, as the speed with hap ac2 access points went down to 30 Mbps... :/ The same devices without Capsman are easily reaching over 250 Mps... Capsman is installed on the main router, RB4011, I use vlans, so I do not see a reason for such a drastic drop in wireless speed.
i had a similar problem; streaming and file trasnfer in LAN stopped suddenly, i resolved downgrade to 7.4.1 all CHR, Hex POE, HAP AC, then i reinstalled 7.5 starting from CHR (no problem) then Hex POE (no problem) then HAP AC (no problem)
 
marlab
just joined
Posts: 19
Joined: Sun Mar 15, 2015 2:48 pm
Location: EU

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 10:19 am

Too many other variables which might be responsible for that speed drop instead of blaming capsman.
Too many variables? Capsman ON = low speed. Capsman off and individual access points activated on hap a2 = full speed. The location of Capsman (server) does not seem to be relevant (I've tried 2 routers). When Capsman is on, the traffic seems to go via CPU on hAP (load goes up to ca. 50%). When it is off, traffic goes via vlans and CPU remains below 10%. There are no firewall/NAT/mange rules activated, no other tunnels on hAP ac2 devices.
 
LSan83
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri Aug 10, 2018 11:35 am
Location: Italy

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 10:40 am

With local forwarding activated or disabled? If you want speed you need to use local forwarding in Capsman.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 11:08 am

@marlab
@holvoetn wrote
Best to start a separate thread and post your config(s) so it can be inspected.

@LSan83: se rispondi al post sopra, per favore non quotare.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
ssbaksa
newbie
Posts: 31
Joined: Tue Oct 20, 2015 10:38 am

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 11:32 am

Openvpn mikrotik-to-mirkotik is still not tested before stable releases and is not working, since 7.4 viewtopic.php?t=187760#p946943
I have tested it and it works for me. At home (server) 2011UiAS-2HnD with 7.5 installed. At work, as a separate router (only for this test , all other traffic is routed trough other routers) RB952Ui-5ac2nD - hAP ac lite with ROS 7.5 as a client. It all works well. No disconnects observed.

Normally I use OpenVPN client on Windows 10 or in Linux Mint to connect to home office and other sites. No problems observed. And I am using this setup for at least 5 years.
 
User avatar
own3r1138
Long time Member
Long time Member
Posts: 554
Joined: Sun Feb 14, 2021 12:33 am
Location: Pleiades
Contact:

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 11:51 am

No disconnects were observed.
Key encryption renewal process which caused periodic session disconnects. as the change log clearly said. Although still, one problem exists, rarely does a client get disconnected for whatever reason But, the server shows the connection active.
 
marlab
just joined
Posts: 19
Joined: Sun Mar 15, 2015 2:48 pm
Location: EU

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 12:22 pm

With local forwarding activated or disabled? If you want speed you need to use local forwarding in Capsman.
Enabled of course. That's why I mentioned this problem in 7.5 thread, I've been using Capsman for a while..
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 12:53 pm

Wifi settings the same with and without capsman ?
Same channels ?
Same width ?
Same security ?
...
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 4:14 pm

According the help page
https://help.mikrotik.com/docs/display/ROS/Container
/container/set 0 start-on-boot=yes
while i get bad command
@Znevna is right

What's new in 7.6beta6 (2022-Sep-07 12:06):
*) container - added "start-on-boot" parameter for automatic container startup;
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Wed Sep 07, 2022 5:36 pm

It sucks that the help.mikrotik.com site does not mention version numbers or has different "views" depending on version numbers.
How is a user of stable version 7.5 supposed to know that a feature described in the online manual is not available in that version, but only in the next beta?
So either each newly added feature/command should have some standard note like "available from version 7.6" or there should be a selection at the top where you can set "see the manual as it is for 7.5" where all new entries added for later versions are not visible...
 
szeffancs
just joined
Posts: 1
Joined: Tue Sep 11, 2018 8:32 am

Re: v7.5 [stable] is released!

Thu Sep 08, 2022 9:52 am

Hy everyone!

I have a problem with Router OS 7.5 on my LTAP mini (RB912r-2ND-ltn).
My Ipsec connection dose not work while I upgrade on 7.4.1 to 7.5 OS.
The firmware type is qca9531L, current firmware is 7.5.
Anybody knows what a problem is?

I see my log where I find that massage
ipsec,error unable to get local issuer certificate(20) at depth:0 cert:(this is my remote certificate name)

thanks
 
User avatar
own3r1138
Long time Member
Long time Member
Posts: 554
Joined: Sun Feb 14, 2021 12:33 am
Location: Pleiades
Contact:

Re: v7.5 [stable] is released!

Thu Sep 08, 2022 10:43 am

ipsec,error unable to get local issuer certificate(20) at depth:0 cert:(this is my remote certificate name)
A simple google search will do more than enough.
mikrotik ipsec,error unable to get local issuer certificate(20) at depth:0 cert site=https://forum.mikrotik.com

viewtopic.php?t=162145
viewtopic.php?t=145608
 
User avatar
Larsa
Long time Member
Long time Member
Posts: 554
Joined: Sat Aug 29, 2015 7:40 pm

Re: v7.5 [stable] is released!

Thu Sep 08, 2022 12:11 pm

It sucks that the help.mikrotik.com site does not mention version numbers or has different "views" depending on version numbers...

Concur indeed. And since the help site is using Confluence/JIRA it should be no problem to version control the help pages if they ever should choose to do so.
 
szeffancs
just joined
Posts: 1
Joined: Tue Sep 11, 2018 8:32 am

Re: v7.5 [stable] is released!

Thu Sep 08, 2022 12:30 pm

ipsec,error unable to get local issuer certificate(20) at depth:0 cert:(this is my remote certificate name)
A simple google search will do more than enough.
mikrotik ipsec,error unable to get local issuer certificate(20) at depth:0 cert site=https://forum.mikrotik.com

viewtopic.php?t=162145
viewtopic.php?t=145608
Thanks for the nothing because there's no answer these websites to my problems! My certificates just work fine...
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Thu Sep 08, 2022 12:37 pm

Thanks for the nothing
nice s–t answer...
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
User avatar
own3r1138
Long time Member
Long time Member
Posts: 554
Joined: Sun Feb 14, 2021 12:33 am
Location: Pleiades
Contact:

Re: v7.5 [stable] is released!

Thu Sep 08, 2022 1:12 pm

Thanks for the nothing because there's no answer these websites to my problems! My certificates just work fine...
You're welcome anyway. :)
 
mmc
newbie
Posts: 39
Joined: Wed Dec 29, 2004 1:44 am

Re: v7.5 [stable] is released!

Thu Sep 08, 2022 6:11 pm

for me ospf v3 with ipv6 multiple instances doesn't work with ros7.5 'stable'.
only the first ipv6 interface sends ospf packets, all others stay in passive by themself and just do nothing. happens only when you have multiple instances & areas.

anybody got this working?
 
anrich
just joined
Posts: 4
Joined: Sun Sep 04, 2022 3:34 pm

Re: v7.5 [stable] is released!

Fri Sep 09, 2022 10:31 am

Hy everyone!

I have a problem with Router OS 7.5 on my LTAP mini (RB912r-2ND-ltn).
My Ipsec connection dose not work while I upgrade on 7.4.1 to 7.5 OS.
The firmware type is qca9531L, current firmware is 7.5.
Anybody knows what a problem is?

I see my log where I find that massage
ipsec,error unable to get local issuer certificate(20) at depth:0 cert:(this is my remote certificate name)

thanks
I had a feeling this might be related to ROS7.5, I'm experiencing the same issue: viewtopic.php?p=955390

Have you found a solution yet? I haven't made any progress unfortunately.
 
User avatar
own3r1138
Long time Member
Long time Member
Posts: 554
Joined: Sun Feb 14, 2021 12:33 am
Location: Pleiades
Contact:

Re: v7.5 [stable] is released!

Fri Sep 09, 2022 10:51 am

this might be related to ROS7.5
2022-09-09_12-17-47.jpg
You do not have the required permissions to view the files attached to this post.
 
Timti
just joined
Posts: 1
Joined: Thu Mar 25, 2021 9:11 pm

Re: v7.5 [stable] is released!

Fri Sep 09, 2022 11:11 am

My wAP 60Gx3 AP does not work with v7.5!
When I ping my wAP 60Gx3 AP, it keeps disconnecting on Ethernet.
In the terminal I found:
mikrotik system,error,critical kernel failure in previous boot
I downgraded to 7.4 and now everything works as usual.
 
anrich
just joined
Posts: 4
Joined: Sun Sep 04, 2022 3:34 pm

Re: v7.5 [stable] is released!

Fri Sep 09, 2022 11:12 am

this might be related to ROS7.5
2022-09-09_12-17-47.jpg
Interesting. Are you using NordVPN? Did you load any certificates other than the Root CA certificate?

Screenshot from 2022-09-09 10-07-13_redact.png
You do not have the required permissions to view the files attached to this post.
 
aurelmarius
just joined
Posts: 8
Joined: Wed May 11, 2016 10:41 pm

Re: v7.5 [stable] is released!

Sun Sep 11, 2022 11:49 am

CCR1009 running routeros 7.5 stable, when i try to set up pimsm, router reboots with kernel panic.
 
Chiara
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Thu Jul 23, 2015 3:47 pm

Re: v7.5 [stable] is released!

Mon Sep 12, 2022 6:11 pm

Dear Sirs,

I've noticed "secrets" have disappeared from exported .rsc configuration files, is there a way to take these back in the file?

Thanks, BR
 
User avatar
eworm
Forum Veteran
Forum Veteran
Posts: 979
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v7.5 [stable] is released!

Mon Sep 12, 2022 6:12 pm

/export show-sensitive
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 3079
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v7.5 [stable] is released!

Mon Sep 12, 2022 7:06 pm

I can confirm that in 7.5 user password is not sown even with show-sensitive (do not remember if I have seen them)
/user> export show-sensitive
/user
add address=192.168.10.0/24 comment="system default user" disabled=yes group=full name=admin
add group=full name=demo
add address=192.168.10.50/32 comment="Use to get remote SSH information." group=full name=admin-ssh

But it does show password for ipsec key when using show-sensitive
/ip/ipsec/identity> export  show-sensitive
/ip ipsec identity
add generate-policy=port-override peer=peer1 remote-id=ignore secret=Complicated_Password

/ip/ipsec/identity> export 
/ip ipsec identity
add generate-policy=port-override peer=peer1 remote-id=ignore
 
moskovskiy82
just joined
Posts: 3
Joined: Sat Mar 10, 2018 7:59 pm

Re: v7.5 [stable] is released!

Mon Sep 12, 2022 8:23 pm

Is there any FAQ what to expect when switching from stable 6.49?
 
Dalo
just joined
Posts: 5
Joined: Thu Jan 11, 2018 11:14 pm

Re: v7.5 [stable] is released!

Tue Sep 13, 2022 9:33 am

Upgraded a CRS354-48P-4S+2Q+RM MLAG paired stack. After this weekend customer reported extreme slow network speed.
Made a return to 7.2.3 and now everything works again.
What about 7.4.1 ?

I had the same behavior with 7.4.1, extreme low speed over the LAN, in RB3011, and hEX POE, causing to roll back to the previous version. For the moment the most stable version for my environment is 7.3.1.
 
soulreaver1
just joined
Posts: 22
Joined: Tue May 11, 2010 12:19 pm
Location: Warsaw, Poland

Re: v7.5 [stable] is released!

Tue Sep 13, 2022 5:53 pm

Recently I've updated the following RBs. I have had only issues with updating RB1100x2 and RB1200 - needed to manually update them becouse the RouterOS was unable to download the update.


  • CCR1009-7G-1C-1S+ (3 pieces)
  • 1100x2 (3 pieces)
  • 1100Dx4 Dude Edition
  • 1200
  • 2011UiAS
  • 951G-2HnD (2 pieces)
  • 750Gr3
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Tue Sep 13, 2022 5:57 pm

@soulreaver1:
RB1100/1200:
Coming from which version ?
There was a "hickup" for powerPC where the naming convention of the update files was changed on server-side so it could not retrieve the updates automagically anymore.
Probably that was your problem.
(I still call it neglect that no symlink was foreseen for the old naming to circumvent such issues...)
 
soulreaver1
just joined
Posts: 22
Joined: Tue May 11, 2010 12:19 pm
Location: Warsaw, Poland

Re: v7.5 [stable] is released!

Wed Sep 14, 2022 9:49 am

@holvoetn All devices were at 6.49.6 before updating to 7.5.
 
Chiara
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Thu Jul 23, 2015 3:47 pm

Re: v7.5 [stable] is released!

Wed Sep 14, 2022 4:37 pm

RB912R-2nD upgraded from 6.49.6 to 7.5, is it standard behavior that lte1 iterface goes down every 4 hours?

lte1 link down
lte1: not registred, state: 0
lte1: registered home
lte1 link up

this haappen exactly every 4 hours: i.e.
14:34:29
10:34:29
06:34:29 and so on
Is there some scheduler that can be removed to avoid this?
 
nmt1900
Frequent Visitor
Frequent Visitor
Posts: 63
Joined: Wed Feb 01, 2017 12:36 am

Re: v7.5 [stable] is released!

Wed Sep 14, 2022 7:53 pm

All devices with ARM cpu's are coming up at the wrong frequency after the 7.4.1 to 7.5 upgrade. You see this in the System / RouterBOARD menu. A warning appears that the cpu is not running at the default frequency. Clicking on the "Settings" button, you see it is incorrectly set to 716MHz and needs to be manually changed back to auto.
That is interesting - has the default changed with introduction of v7, because at least as far as i remember all ipq4000 devices were defaulted to this same 716 MHz before and same is mentioned in the hardware specifications as well (yes I know that "auto" setting was there in v6 for quite some time...)?

I finally jumped on v7 bandwagon and this was the first surprise I got - and yes warning disappeared when frequency was set to "auto" and it was immediately obvious that frequency change behaviour is different than it was on v6 with "auto" setting - at least ipq4000 now jumps all over the place from 448 up to 800+ MHz. It was way more "conservative" on v6.
 
User avatar
pothi
newbie
Posts: 35
Joined: Fri Sep 14, 2018 7:48 pm
Location: Srivilliputhur, Tamil Nadu, India
Contact:

Re: v7.5 [stable] is released!

Thu Sep 15, 2022 4:57 am

@Chiara There is no new scheduler in RouterOS 7.5, as far as I know. Kindly create a support ticket. Support staff may guide you with troubleshooting this specific issue.
 
User avatar
Paternot
Forum Veteran
Forum Veteran
Posts: 931
Joined: Thu Jun 02, 2016 4:01 am
Location: Niterói / Brazil

Re: v7.5 [stable] is released!

Thu Sep 15, 2022 5:41 am

That is interesting - has the default changed with introduction of v7, because at least as far as i remember all ipq4000 devices were defaulted to this same 716 MHz before and same is mentioned in the hardware specifications as well (yes I know that "auto" setting was there in v6 for quite some time...)?
Before the CPU was running at a fixed frequency: 716MHz. This is why it's set to 716MHz after upgrade. Problem is: RoS now wants to run with "auto", and shows this complain when set to 716MHz.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Thu Sep 15, 2022 10:58 am

@pothi
@Chiara ...
Can be simply the LTE operator that do not want one user to stay linked forever...
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
LSan83
Frequent Visitor
Frequent Visitor
Posts: 65
Joined: Fri Aug 10, 2018 11:35 am
Location: Italy

Re: v7.5 [stable] is released!

Thu Sep 15, 2022 11:15 am

@Chiara
With which operator you have the reset of connection?
Wind3 in Italy? They reset every connection after 4 hours, you can't avoid this.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Thu Sep 15, 2022 11:48 am

Wind3 in Italy? They reset every connection after 4 hours, you can't avoid this.
He wrote that he upgraded from 6.49.6 to 7.5. But he did not tell if before it was the same thing. Hopefully he watched the logging before he upgraded.
Here with T-Mobile it is normal that the connection is interrupted every 24 hours. But sometimes I see interruption every 8 hours for a while.
Probably the providers are playing with such a parameter to try to solve problems in their network, e.g. overloading of particular cells.
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Thu Sep 15, 2022 2:21 pm

Probably the providers are playing with such a parameter to try to solve problems in their network, e.g. overloading of particular cells.

Mobility is taken very seriously in standardization phase of every generation of mobile technology ... so no, disconnecting clients is not necessary to move users between cells. And it doesn't work for "smart" clients who use cell lock on their devices anyway. There are a few other problems MNOs might try to solve by disconnecting clients, one is clearing up PDP/EPS contexts in their core network nodes (in the same manner as rebooting computer to "fix" memory leak), another one is making sure clients (at least most of them) don't run service off their mobile subscription plan (with its dumping price).
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Thu Sep 15, 2022 7:34 pm

another one is making sure clients (at least most of them) don't run service off their mobile subscription plan (with its dumping price).
Normally the clients are behind CGNAT so running services on them does not make much sense anyway.
We use 4G backup of fixed line connection to branch routers, I have L2TP/IPsec from the branch to the central office and every day they disconnect and reconnect.
Fortunately the disconnects are done at exact 24h intervals (normally) and as I have a secheduled job to apply updates during the night, the disconnects also happen during the night.
 
User avatar
rushlife
Member Candidate
Member Candidate
Posts: 218
Joined: Thu Nov 05, 2015 12:30 pm
Location: CZ, USA

Re: v7.5 [stable] is released!

Sun Sep 18, 2022 9:31 am

Hi,
yesterday first problem with 7.5stable.
On RBLHGG-60ad units, boot error, kernel panic.
Reverting back to 7.4.1 solved that problem.

Be careful with upgrade on these units guys.
 
HasanAlawlaki
just joined
Posts: 5
Joined: Wed Sep 06, 2017 1:18 pm

Re: v7.5 [stable] is released!

Mon Sep 19, 2022 12:11 pm

بدون عنوان.png
No session time left
No limit bytes total

How to fix that
You do not have the required permissions to view the files attached to this post.
 
Rox169
Member Candidate
Member Candidate
Posts: 163
Joined: Sat Sep 04, 2021 1:47 am

Re: v7.5 [stable] is released!

Mon Sep 19, 2022 1:03 pm

Hi,
yesterday first problem with 7.5stable.
On RBLHGG-60ad units, boot error, kernel panic.
Reverting back to 7.4.1 solved that problem.

Be careful with upgrade on these units guys.
Be carefull on 7.4.1 I had problem on ROS 7.4 few days ago....I upgraded especially because this fix *) w60g - improved interface initialization after being inactive for a while;

But on WAP60Ghz happend exactly what should this fix fixed.
 
ArShuRaZ
newbie
Posts: 26
Joined: Sat Apr 14, 2018 12:37 pm

Re: v7.5 [stable] is released!

Mon Sep 19, 2022 4:35 pm

ping - improved service stability;
Is this version (7.5) already fixed ping issue (Cannot ping to everywhere after run for a while)?
 
User avatar
eworm
Forum Veteran
Forum Veteran
Posts: 979
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v7.5 [stable] is released!

Mon Sep 19, 2022 4:36 pm

Is this version (7.5) already fixed ping issue (Cannot ping to everywhere after run for a while)?
Yes.
 
ArShuRaZ
newbie
Posts: 26
Joined: Sat Apr 14, 2018 12:37 pm

Re: v7.5 [stable] is released!

Mon Sep 19, 2022 4:45 pm

thank you :)
 
prawira
Trainer
Trainer
Posts: 348
Joined: Fri Feb 10, 2006 5:11 am

Re: v7.5 [stable] is released!

Tue Sep 20, 2022 8:16 am

the recursive work, but no recursive via words on /ip route menu

the display of routing table sometime does not represent the current situation after the interface changed.
Image
the table routing have to close and open again to see the correct situation
You do not have the required permissions to view the files attached to this post.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Tue Sep 20, 2022 11:10 am

the recursive work, but no recursive via words on /ip route menu
You may need to enable an extra column in the display to see that.
 
rb9999
just joined
Posts: 23
Joined: Thu Dec 06, 2018 3:09 pm

Re: v7.5 [stable] is released!

Tue Sep 20, 2022 10:21 pm

Issues upgrading RB951-2n frmo 7.1.5 to 7.5.0... nothing fancy, some vlans, some bridged ports, it seems its reverts to 7.1.5 and gets unresponsive.
rb9512n-715-750.png
You do not have the required permissions to view the files attached to this post.
 
prawira
Trainer
Trainer
Posts: 348
Joined: Fri Feb 10, 2006 5:11 am

Re: v7.5 [stable] is released!

Wed Sep 21, 2022 5:00 am

dear pe1chl,

normally we can see recursive via both on gui and cli. i can not see it on v7.x; check on target-scope>30

also, no-more unreachable (U) and or prohibit (P) options for routing, thus no (B) flag shown on blackhole entries.
/ip route
add check-gateway=ping disabled=no distance=1 dst-address=10.1.2.0/30 gateway=10.1.1.2
add check-gateway=ping disabled=no distance=1 dst-address=10.1.3.0/30 gateway=10.1.2.2 target-scope=31
add check-gateway=ping disabled=no distance=1 dst-address=192.168.2.0/29 gateway=10.1.1.2
add check-gateway=ping disabled=no distance=1 dst-address=192.168.3.0/29 gateway=10.1.2.2 target-scope=31
add check-gateway=ping disabled=no distance=1 dst-address=192.168.4.0/29 gateway=10.1.3.2 target-scope=32
add disabled=no distance=2 dst-address=10.1.2.0/30 gateway=10.1.4.1
add disabled=no distance=2 dst-address=10.1.3.0/30 gateway=10.1.4.1
add disabled=no distance=2 dst-address=192.168.2.0/29 gateway=10.1.4.1
add disabled=no distance=2 dst-address=192.168.3.0/29 gateway=10.1.4.1
add disabled=no distance=2 dst-address=192.168.4.0/29 gateway=10.1.4.1
[admin@R1] /ip/route> print detail
Flags: D - dynamic; X - disabled, I - inactive, A - active; c - connect, s - static, r - rip, b - bgp, o - ospf, d - dhcp, v - vpn, m - modem, y - copy; H - hw-offloaded; + - ecmp 
   DAd   dst-address=0.0.0.0/0 routing-table=main pref-src="" gateway=10.31.31.1 immediate-gw=10.31.31.1%ether1 distance=1 scope=30 target-scope=10 vrf-interface=ether1 suppress-hw-offload=no 

   DAc   dst-address=10.1.1.0/30 routing-table=main gateway=ether3 immediate-gw=ether3 distance=0 scope=10 suppress-hw-offload=no local-address=10.1.1.1%ether3 

 0   s   dst-address=10.1.2.0/30 routing-table=main pref-src="" gateway=10.1.4.1 immediate-gw=10.1.4.1%ether4 distance=2 scope=30 target-scope=10 suppress-hw-offload=no 

 1  As   dst-address=10.1.2.0/30 routing-table=main pref-src="" gateway=10.1.1.2 immediate-gw=10.1.1.2%ether3 check-gateway=ping distance=1 scope=30 target-scope=10 suppress-hw-offload=no 

 2   s   dst-address=10.1.3.0/30 routing-table=main pref-src="" gateway=10.1.4.1 immediate-gw=10.1.4.1%ether4 distance=2 scope=30 target-scope=10 suppress-hw-offload=no 

 3  As   dst-address=10.1.3.0/30 routing-table=main pref-src="" gateway=10.1.2.2 immediate-gw=10.1.1.2%ether3 check-gateway=ping distance=1 scope=30 target-scope=31 suppress-hw-offload=no 

   DAc   dst-address=10.1.4.0/30 routing-table=main gateway=ether4 immediate-gw=ether4 distance=0 scope=10 suppress-hw-offload=no local-address=10.1.4.2%ether4 

   DAc   dst-address=10.31.31.0/24 routing-table=main gateway=ether1 immediate-gw=ether1 distance=0 scope=10 suppress-hw-offload=no local-address=10.31.31.230%ether1 

   DAc   dst-address=192.168.1.0/29 routing-table=main gateway=ether2 immediate-gw=ether2 distance=0 scope=10 suppress-hw-offload=no local-address=192.168.1.1%ether2 

 4   s   dst-address=192.168.2.0/29 routing-table=main pref-src="" gateway=10.1.4.1 immediate-gw=10.1.4.1%ether4 distance=2 scope=30 target-scope=10 suppress-hw-offload=no 

 5  As   dst-address=192.168.2.0/29 routing-table=main pref-src="" gateway=10.1.1.2 immediate-gw=10.1.1.2%ether3 check-gateway=ping distance=1 scope=30 target-scope=10 suppress-hw-offload=no 

 6   s   dst-address=192.168.3.0/29 routing-table=main pref-src="" gateway=10.1.4.1 immediate-gw=10.1.4.1%ether4 distance=2 scope=30 target-scope=10 suppress-hw-offload=no 

 7  As   dst-address=192.168.3.0/29 routing-table=main pref-src="" gateway=10.1.2.2 immediate-gw=10.1.1.2%ether3 check-gateway=ping distance=1 scope=30 target-scope=31 suppress-hw-offload=no 

 8   s   dst-address=192.168.4.0/29 routing-table=main pref-src="" gateway=10.1.4.1 immediate-gw=10.1.4.1%ether4 distance=2 scope=30 target-scope=10 suppress-hw-offload=no 

 9  As   dst-address=192.168.4.0/29 routing-table=main pref-src="" gateway=10.1.3.2 immediate-gw=10.1.1.2%ether3 check-gateway=ping distance=1 scope=30 target-scope=32 suppress-hw-offload=no 
 
User avatar
Znevna
Forum Guru
Forum Guru
Posts: 1122
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.5 [stable] is released!

Wed Sep 21, 2022 7:10 am

Dear @prawira (trainer), I suggest to read the documentation provided that brings some answers to some of the things you've mentioned.
Moving from ROSv6 to v7 with examples
v7 introduces a new menu /routing route, which shows all address family routes as well as all filtered routes with all possible route attributes. /ip route and /ipv6 route menus are used to add static routes and for simplicity show only basic route attributes.
For more in-depth information on routing see this article (IP Routing).
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Wed Sep 21, 2022 12:20 pm

normally we can see recursive via both on gui and cli. i can not see it on v7.x; check on target-scope>30

also, no-more unreachable (U) and or prohibit (P) options for routing, thus no (B) flag shown on blackhole entries.
That is all correct. There are no unreachable or prohibited routes anymore, and when you had them they are converted to blackhole.
And blackhole is no longer a flag. There is a separate column "Blackhole" with a yes/no value in it.
As Znevna already wrote, a lot of things have changed in the routing between v6 and v7 and you will have to learn about it. These are not bugs.
 
maisonmdsgreen
just joined
Posts: 12
Joined: Tue Aug 21, 2012 4:51 pm

Re: v7.5 [stable] is released!

Thu Sep 22, 2022 6:24 am

RB912R-2nD upgraded from 6.49.6 to 7.5, is it standard behavior that lte1 iterface goes down every 4 hours?

lte1 link down
lte1: not registered, state: 0
lte1: registered home
lte1 link up

this haappen exactly every 4 hours: i.e.
14:34:29
10:34:29
06:34:29 and so on
Is there some scheduler that can be removed to avoid this?
Same here in rb3011 24 hours link down 4 interface
viewtopic.php?t=189396
You do not have the required permissions to view the files attached to this post.
 
User avatar
anoka
just joined
Posts: 4
Joined: Fri Jul 26, 2013 2:06 pm
Location: Hungary

Re: v7.5 [stable] is released!

Mon Sep 26, 2022 1:46 am

Hi!

When I use CAPsMAN for local WLAN interface, then it's displayed as disabled port, but running.

[…]
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 8930
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.5 [stable] is released!

Mon Sep 26, 2022 1:50 am

@anoka
Do you talk to others by images?
Did you see that there are two red writing above the wireless interface?
Maybe try reading them.

For help open another topic and do not continue here.
✂ Rextended Fragments of Snippets

Vld4UmVHUkdhelJUTTJzOQ==
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Tue Sep 27, 2022 12:34 pm

Upgraded cAP AC XL from 6.49.6 using Winbox.
After reboot, device became unresponsive.

Netinstall 7.5 doesn't seem to work (linux). It requests the package, it starts and then it starts all over again after some time.
Same with 6.49.6 and latest 7.6beta.

Sweet ... I've got a couple of other XLs, I guess I keep them on 6.49.6 for now.
SUP-93559 created.
EDIT: got a first reply, this is going to be fun if the response I get is to use netinstall ...
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Tue Sep 27, 2022 2:02 pm

Success !
Powered everything down incl laptop with Linux.
Went for lunch
Powered everything up again and used netinstall.
Instead of nothing after the recognition of the device, I immediatelly saw a line "formatting". And then I knew it was going to work !
cAP XL is running 7.6beta8 now.

But something ODD: it remembered the user passwd (I did change it before the upgrade, one of the first things I do on a new device next to activating ROMON).
Also on wireless I changed (before upgrade) the settings for country and installation. Those were remembered as well.
Ergo: netinstall did not format that device completely...
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Tue Sep 27, 2022 4:16 pm

User manual, the linux section, describing command line options for netinstall executable, mentions
-r resets the configuration upon reinstallation procedure, optional

So by default, linux netinstall keeps configuration.
 
User avatar
Znevna
Forum Guru
Forum Guru
Posts: 1122
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.5 [stable] is released!

Tue Sep 27, 2022 4:19 pm

Don't use netinstall on an empty stomach.
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Tue Sep 27, 2022 4:24 pm

Before using netinstall, have a light meal and read some literature ;-)
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Tue Sep 27, 2022 4:26 pm

@mkx: hmmm ... missed that. Good to know !
But then it is inconsistent with the Windows version since there you explicitely need to tick the option to keep user config.
Confusing ...

@Znevna: seems to be a solution for quite a lot of things.
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Tue Sep 27, 2022 6:11 pm

@mkx: hmmm ... missed that. Good to know !
But then it is inconsistent with the Windows version ...
The inconsistence continues beyond that ... UI is completely different.
I'm not trying to argue about what you're saying, what I'm trying to say is that both versions (linux and windows), although having same name and basically doing same job, are completely different beasts. Additionally, CLI doesn't offer any clues about available toggles and switches, so reading manual is pretty smart thing to do (which I usually try to avoid myself as well, making me sound a smart ass right now).
 
gotsprings
Forum Guru
Forum Guru
Posts: 1731
Joined: Mon May 14, 2012 9:30 pm

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 2:56 am

Took a factory Fresh RB3011 and Updated it to 7.5.

Opening terminal would cause the CPU to shoot up and terminal not to work.

Downgraded to 7.4.1 and saw a warning that stated there had been a reboot for kernel failure.

Will check the router in a few days and see if its stable. It was a had to replace a unit that ate some voltage during a storm.
/log print
 18:50:00 system,error,critical router was rebooted without proper shutdown, pro
bably kernel failure
 18:50:01 system,error,critical kernel failure in previous boot

 
User avatar
Znevna
Forum Guru
Forum Guru
Posts: 1122
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 11:14 am

I'd stay with v6 on that one.
 
gotsprings
Forum Guru
Forum Guru
Posts: 1731
Joined: Mon May 14, 2012 9:30 pm

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 11:17 am

Can't.

System requires Wireguard.

Should be using Zerotier... Which also requires 7.x + extra packages.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 12:04 pm

Took a factory Fresh RB3011 and Updated it to 7.5.
Regular update or netinstall ?
I'd try netinstall...
 
gotsprings
Forum Guru
Forum Guru
Posts: 1731
Joined: Mon May 14, 2012 9:30 pm

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 3:20 pm

moderator note: why do you quote whole preceding post? Use "Post Reply" instead.

/System package update install

Now hold on a second... I can take a "default the unit after update"... But there had better be a clear warning that is gonna be needed BEFORE I CAN EVEN DOWNLOAD THE UPDATE.

If we need to start doing netinstalls before sending them out in the field... I wanna see a big f--king warning on the top of EVERYTHING from the Mikrotik domain.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 3:52 pm

There will/might come a point when moving from ROS6 to ROS7 you may see erratic and inexplicable behavior.
At that moment it is advised to perform a pristine clean install to clear any inconsistencies (from ROS7 point of view) left-over from previous version.
A.k.a. Netinstall.
 
User avatar
mozerd
Forum Veteran
Forum Veteran
Posts: 805
Joined: Thu Oct 05, 2017 3:39 pm
Location: Canada
Contact:

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 4:52 pm

If we need to start doing netinstalls before sending them out in the field... I wanna see a big f--king warning on the top of EVERYTHING from the Mikrotik domain.
@gotsprings ....
My speculation is that over the last 2 years many personnel changes have take place in the Tik developer domain so the expertise needed to get 7.x to where it should be will take much more time ....

With Tailscale [WireGuard management system] you can have your Cake and Eat it and performance is wonderful. Mastering Tailscale is no big deal exploiting Tailscale Subnet routers and traffic relay nodes provides a great deal of power in your hands.
 
User avatar
Znevna
Forum Guru
Forum Guru
Posts: 1122
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.5 [stable] is released!

Sun Oct 02, 2022 5:27 pm

Talk about Tailscale has no place in this topic.
 
socs
just joined
Posts: 2
Joined: Fri Aug 26, 2022 10:37 am

Re: v7.5 [stable] is released!

Tue Oct 04, 2022 6:20 pm

I'm unable to pull containers when using custom registry-url that is not "registry-1.docker.io". Here's the log,
14:53:18 container,info,debug importing remote image: routeros-container/routeros-container, tag: latest
14:53:18 system,info item added by admin
14:53:18 container,info,debug failed to parse www-auth
14:53:18 container,info,debug was unable to import, container 4558db4a-cc1f-4f92-825c-c1c1f94fbb86
This is from a self-hosted registry but the result are the same for other official registries, eg gcr.io.

edit: fixed in 7.6rc1
Last edited by socs on Fri Oct 07, 2022 8:23 am, edited 1 time in total.
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1887
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: v7.5 [stable] is released!

Thu Oct 06, 2022 1:27 am

ros6 show one ping as one row and I see the TX RX in one entry, as send and proper back package in one session.
ros7 show me two entry/row, please fix this in Torch
Image
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Thu Oct 06, 2022 10:21 am

This is because your DSCP is different between the two directions, and you selected a matching with DSCP (even when it is "any").
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1887
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: v7.5 [stable] is released!

Thu Oct 06, 2022 4:38 pm

pe1chl write:
This is because your DSCP is different between the two directions
Thanks, it's true in this case.

and you selected a matching with DSCP (even when it is "any").
This is default settings in ros7, I not enabled that by myself.
True, after disable this selector the entry is one row, like old ros6. Thanks !.
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 13696
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: v7.5 [stable] is released!

Thu Oct 06, 2022 4:42 pm

With Tailscale [WireGuard management system] you can have your Cake and Eat it and performance is wonderful. Mastering Tailscale is no big deal exploiting Tailscale Subnet routers and traffic relay nodes provides a great deal of power in your hands.
Hi mozerd, can you confirm its easy to implement 2FA with tailscale, vice wireguard which seems to be a bit of a challenge.
 
User avatar
mozerd
Forum Veteran
Forum Veteran
Posts: 805
Joined: Thu Oct 05, 2017 3:39 pm
Location: Canada
Contact:

Re: v7.5 [stable] is released!

Thu Oct 06, 2022 6:11 pm

Hi mozerd, can you confirm its easy to implement 2FA with tailscale, vice wireguard which seems to be a bit of a challenge.
Greetings anav
When you establish an account with Tailscale you are provided with a number of options including the most popular 2FA identity provider like google, Microsoft
Tailscale relies on existing identity provider to authenticate users. Any authentication settings from your identity provider are automatically used by Tailscale, including MFA

For Example I use google .... many people I know like to use Microsoft etc. So for example once you have a Gmail account and enabled 2FA on it --- that will now be used by Tailscale as the screen following depicts. Its very easy :-)
MFA.GIF
You do not have the required permissions to view the files attached to this post.
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 13696
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: v7.5 [stable] is released!

Thu Oct 06, 2022 6:15 pm

Now that would a great future update for MT to put on their wireguard module.... a redirect to 2FA after connecting...............
Or I suppose a work around might be to the radius server on the MT where a user has to put in another password?"????
 
rb9999
just joined
Posts: 23
Joined: Thu Dec 06, 2018 3:09 pm

Re: v7.5 [stable] is released!

Fri Oct 07, 2022 10:13 am

Did anyone notice that arp ping still doesn't work? Guess this is a major downside if gateway doesn't respond to ICMP echo request and you have check-gateway set to arp...
[admin@Mikrotik] > tool/ping arp-ping=yes interface=bridge-lan count=5 192.168.0.1
SEQ HOST SIZE TTL TIME STATUS
0 ping failed
1 ping failed
2 ping failed
3 ping failed
4 ping failed
sent=5 received=0 packet-loss=100%
 
marcocamza
just joined
Posts: 4
Joined: Thu Jul 05, 2018 3:35 pm

Re: v7.5 [stable] is released!

Fri Oct 07, 2022 10:34 am

Hi all

Not sure if what I'm seeing is correct but I thought Ros7 utilizes all cores more efficiently.
The attached image shows only 1 CPU being used on a 2216 that's only doing BGP and nothing else.
You do not have the required permissions to view the files attached to this post.
 
usmank
just joined
Posts: 2
Joined: Tue Jun 05, 2018 7:27 pm

Re: v7.5 [stable] is released!

Sat Oct 08, 2022 4:13 am

بدون عنوان.png
No session time left
No limit bytes total

How to fix that
Yes... I have the same problem with this, is there any solution?
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Sat Oct 08, 2022 12:58 pm

Not sure if what I'm seeing is correct but I thought Ros7 utilizes all cores more efficiently.
The attached image shows only 1 CPU being used on a 2216 that's only doing BGP and nothing else.
It is not like all activity w.r.t. BGP is now spread over all cores. That would require a multithreaded implementation of the BGP protocol, which is apparently hard to do.
However, the handling has been split in some different processes, e.g. for filtering and route table maintenance, and there is a separate process for each peer.
When you have only a single peer, that probably does not bring you much.
 
MarcinPLPOZ
just joined
Posts: 5
Joined: Fri Aug 24, 2018 9:04 pm

Re: v7.5 [stable] is released!

Mon Oct 10, 2022 1:13 pm

After updating to 7.5, when I want to add a new entry to QoS (simple), I noticed that it causes an interruption of the internet connection for the given subnet for which I am setting it up. Someone had that too? What is the answer?
I would like to add that the previously added entries work, and the new ones do not.
 
winap
just joined
Posts: 20
Joined: Thu Sep 23, 2021 10:57 pm

Re: v7.5 [stable] is released!

Mon Oct 10, 2022 11:43 pm

After updating to 7.5, when I want to add a new entry to QoS (simple), I noticed that it causes an interruption of the internet connection for the given subnet for which I am setting it up. Someone had that too? What is the answer?
I would like to add that the previously added entries work, and the new ones do not.
From which version?
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Tue Oct 11, 2022 12:30 am

Also, please show a /queue/simple/export made both before and after you have added the new entry.
 
MarcinPLPOZ
just joined
Posts: 5
Joined: Fri Aug 24, 2018 9:04 pm

Re: v7.5 [stable] is released!

Wed Oct 12, 2022 10:58 am

After updating to 7.5, when I want to add a new entry to QoS (simple), I noticed that it causes an interruption of the internet connection for the given subnet for which I am setting it up. Someone had that too? What is the answer?
I would like to add that the previously added entries work, and the new ones do not.
From which version?
I updated one by one as "stable" appeared, ie from the previous one, ie 7.4.1. I admit, I don't know if the problem has arisen now. Maybe it was already during an earlier upgrade. I am unable to establish this.
 
MarcinPLPOZ
just joined
Posts: 5
Joined: Fri Aug 24, 2018 9:04 pm

Re: v7.5 [stable] is released!

Wed Oct 12, 2022 12:49 pm

Also, please show a /queue/simple/export made both before and after you have added the new entry.
before
/queue simple
add max-limit=50M/50M name=limit-vlan6 target=VLAN_6_LAN
add max-limit=15M/15M name=limit-guest target=VLAN_8_Guest

after
/queue simple
add max-limit=50M/50M name=limit-vlan6 target=VLAN_6_LAN
add max-limit=15M/15M name=limit-guest target=VLAN_8_Guest
add max-limit=70/70 name=limit-vlan4 target=VLAN_4_VMs_admin

The last entry does not work (VLAN_4_VMs_admin), and even cuts the Internet for hosts in that subnet.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1622
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.5 [stable] is released!

Wed Oct 12, 2022 1:17 pm

70 BYTES is not a lot.
Should be 70M/70M, no ?
 
mkx
Forum Guru
Forum Guru
Posts: 8467
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.5 [stable] is released!

Thu Oct 13, 2022 8:54 am

Up to latest v6 releases the principle was that every release (e.g. 6.x) was kind of a feature freeze. Then the minor releases (e.g. 6.x.y) were more or less bug fixes. This kind of release cycle is not prominent in v7 yet as the whole v7 is still largely work in progress. I expect that with some 7.10 things will slowly converge and we'll see more "bug fix only" releases from that point forward.

And I really don't see need for major version inflation (e.g. v8 after 7.7). We've had v6 around pretty long time (I'm not around long enough to remember v5) while there were quite a few major changes in the v6 series (e.g. brand new wireless driver which is proprietary now, bridge with VLAN functionality, etc.).
 
MarcinPLPOZ
just joined
Posts: 5
Joined: Fri Aug 24, 2018 9:04 pm

Re: v7.5 [stable] is released!

Thu Oct 13, 2022 10:31 am

70 BYTES is not a lot.
Should be 70M/70M, no ?
OMG, you are right, and I thought I tried it in the 70M / 70M configuration before and it didn't work ... ehhh ... well, it actually works.
Thanks @mkx
Last edited by MarcinPLPOZ on Thu Oct 13, 2022 1:24 pm, edited 1 time in total.
 
MarcinPLPOZ
just joined
Posts: 5
Joined: Fri Aug 24, 2018 9:04 pm

Re: v7.5 [stable] is released!

Thu Oct 13, 2022 10:33 am

Up to latest v6 releases the principle was that every release (e.g. 6.x) was kind of a feature freeze. Then the minor releases (e.g. 6.x.y) were more or less bug fixes. This kind of release cycle is not prominent in v7 yet as the whole v7 is still largely work in progress. I expect that with some 7.10 things will slowly converge and we'll see more "bug fix only" releases from that point forward.

And I really don't see need for major version inflation (e.g. v8 after 7.7). We've had v6 around pretty long time (I'm not around long enough to remember v5) while there were quite a few major changes in the v6 series (e.g. brand new wireless driver which is proprietary now, bridge with VLAN functionality, etc.).
Thanks for explanation. Regards :)
 
pe1chl
Forum Guru
Forum Guru
Posts: 8856
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.5 [stable] is released!

Thu Oct 13, 2022 11:42 am

Up to latest v6 releases the principle was that every release (e.g. 6.x) was kind of a feature freeze. Then the minor releases (e.g. 6.x.y) were more or less bug fixes. This kind of release cycle is not prominent in v7 yet as the whole v7 is still largely work in progress. I expect that with some 7.10 things will slowly converge and we'll see more "bug fix only" releases from that point forward.
I'm still hoping that someone at MikroTik has a list of features of v6 that are no longer working in v7, and assigns some priority to fixing those or putting up a list of features in the documentation that "are gone and will not come back".
 
stylsoft
just joined
Posts: 1
Joined: Wed Jan 22, 2020 9:52 am

Re: v7.5 [stable] is released!

Sun Oct 16, 2022 9:04 pm

Upgrade from 7.3.1 to 7.5. CCR2004-1G12S+XS and RB4011 many reboots after 2-12h. Downgrade back to 7.3.1
 
lechat75
just joined
Posts: 19
Joined: Sun Jun 21, 2020 12:24 pm

Re: v7.5 [stable] is released!

Mon Oct 17, 2022 12:52 pm

Hello,

I am using the CHR Version.
Weired things with VLAN and "user service tag" for 802.1ad.
It works fine - I mean mac learning.
UDP and ICMP are working fine too but TCP does not work.
I am not able to :
- telnet between two CHR
- ssh between two CHR
- set up an BGP session

This issue does not exist with 6.48.6


HTH
 
ahmedelbarbary
just joined
Posts: 19
Joined: Thu Dec 01, 2016 1:23 am

Re: v7.5 [stable] is released!

Mon Oct 17, 2022 10:47 pm

Hello mikrotik team
I can't use this rule in new terminal on 7.5
ip firewall connection remove [find]
Could you check it?
 
gotsprings
Forum Guru
Forum Guru
Posts: 1731
Joined: Mon May 14, 2012 9:30 pm

Re: v7.5 [stable] is released!

Mon Oct 17, 2022 11:20 pm

CRS328-24P-4S+
Ports 17-24 don't have a tab for POE in winbox.

But port 22 is powering my WAP right now.
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 897
Joined: Thu Dec 11, 2014 8:53 am

Re: v7.5 [stable] is released!

Tue Oct 18, 2022 11:49 am

New version v7.6 has been released!

viewtopic.php?t=190072

Who is online

Users browsing this forum: No registered users and 4 guests