Community discussions

MikroTik App
 
tristanaj1
just joined
Topic Author
Posts: 2
Joined: Thu May 12, 2016 7:22 pm

Problems using AX8817X based USB-Ethernet adapters

Wed Aug 03, 2016 4:12 pm

Hi -

I'm trying to find a good value USB-Ethernet adapter that I can connect to the microUSB port on the MikroTik map 2n access points. I've bought a few, with the following chipsets. Although they all appear in /system resource print, none of them show anything in /port print, or create any additional interface. Am I doing something wrong?

ProSignal PSG90932 - AX88179
Gigabit USB3.0 - AX88179
ProSignal PSG90931 - AX88178A
ProSignal PSG90987 - AX88179

I know the manual says that AX88178 doesn't work, but the 179 versions should right?
See http://wiki.mikrotik.com/wiki/Supported ... l_adapters

Is there anything I can do to fix this? And/or are there any good value alternatives you'd recommend that I will be able to reliably source 200x or so of?

Thanks!
 
DevilCore
just joined
Posts: 5
Joined: Thu Nov 06, 2014 12:54 am

Re: Problems using AX8817X based USB-Ethernet adapters

Sat Oct 29, 2016 12:11 pm

I'm also interested in this issue. Please, normis or someone else from Mikrotik team, let us know how to resolve these issues.
 
Elektrik
just joined
Posts: 7
Joined: Wed Jul 29, 2015 11:37 am
Location: Lithuania

Re: Problems using AX8817X based USB-Ethernet adapters

Thu Jun 20, 2019 4:15 am

Hello,

since no response in this thread, I will bump it.

I do have AX88179 based dongle, and I confirm it does not work, however it's detected correctly in RB951G, nothing shows up in interfaces list:
Image

Is there any chance it will be supported ?
 
r00t
Long time Member
Long time Member
Posts: 672
Joined: Tue Nov 28, 2017 2:14 am

Re: Problems using AX8817X based USB-Ethernet adapters

Thu Jun 20, 2019 3:53 pm

I have two adapters that do work (note: tested on x86 ROS, drivers on other platforms may vary):
usb2eth.png
The moschip one is Hama 00049244-V2 Hama USB-2.0, I bought years ago in a store and it wasn't cheap (30 euro?). You can still find it but it's expensive:
hama.jpg
Second one is very cheap usb to lan adapter from aliexpress or ebay. This type was everywhere about a year ago, but now, I can't find it anywhere:
cheap.jpg
One led is red other is yellow. The MAC is clearly suspicious, it's probably clone of AX8817X chip that somehow works better than the others.
It's possible newer ones have same chip, but you never know with these cheap items, you buy them and they vanish next day.
You do not have the required permissions to view the files attached to this post.
 
Elektrik
just joined
Posts: 7
Joined: Wed Jul 29, 2015 11:37 am
Location: Lithuania

Re: Problems using AX8817X based USB-Ethernet adapters

Thu Jun 20, 2019 3:59 pm

Thank you for your response, already bought one from ali for tests: https://www.aliexpress.com/item/32826262604.html

For Serial/MAC, 772B chips store this data in external EEPROM, which can be reprogrammed to whatever values, Chinese manufacturers perhaps just implement local serials.
 
pe1chl
Forum Guru
Forum Guru
Posts: 10195
Joined: Mon Jun 08, 2015 12:09 pm

Re: Problems using AX8817X based USB-Ethernet adapters

Thu Jun 20, 2019 4:02 pm

Also note that the physical appearance and even the manufacturer+type does not tell that the chip remains the same.
It is quite customary to switch between chips on different production runs of devices like that.
 
r00t
Long time Member
Long time Member
Posts: 672
Joined: Tue Nov 28, 2017 2:14 am

Re: Problems using AX8817X based USB-Ethernet adapters

Thu Jun 20, 2019 5:16 pm

yes, you never know what you are going to get. Same case might contain various types of PCB or even same design with various "compatible" chips. I have seen some online reviews of USB LAN adapters and some were REALLY bad (worked, but linked only at 10Mbit/s and actual speed was a few kilobits/sec): https://olimex.wordpress.com/2012/09/18 ... onverters/
When you find a good working one, it's probably wise to just quickly buy 5 or 10 (or as many as you may need in the future) from exactly same seller. There is still chance you get completely different ones, but it's still better than picking them at random...
I also remember some had Realtek chips and were also well supported, but I had no chance to test that specific one on ROS. But it worked well on windows 7 PC.
 
Elektrik
just joined
Posts: 7
Joined: Wed Jul 29, 2015 11:37 am
Location: Lithuania

Re: Problems using AX8817X based USB-Ethernet adapters

Sun Jul 07, 2019 7:53 pm

Ok, finally got the ETH adapter, I have ordered 772B chipset, and got RTL8152B. Refund already processing. Now I got laying RTL8152B and AX88179 adapters, which are not compatible to mikrotik. Wonder how many more I will need to buy before mikrotik team will include a driver to popular interfaces rather than pushing us to find appropriate interface...
 
pe1chl
Forum Guru
Forum Guru
Posts: 10195
Joined: Mon Jun 08, 2015 12:09 pm

Re: Problems using AX8817X based USB-Ethernet adapters

Sun Jul 07, 2019 8:34 pm

MikroTik have enough small and cheap APs that you can use without such an external USB ethernet adapter.
E.g. when you want a mAP 2n with one more ethernet port, take a look at the hAP lite.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11433
Joined: Thu Mar 03, 2016 10:23 pm

Re: Problems using AX8817X based USB-Ethernet adapters

Sun Jul 07, 2019 9:45 pm

Mikrotik will hopefully add support for plethora of peripherials in ROS v7 ... and I'm genuinely looking forward to see it in not-so-distant future.
 
Elektrik
just joined
Posts: 7
Joined: Wed Jul 29, 2015 11:37 am
Location: Lithuania

Re: Problems using AX8817X based USB-Ethernet adapters

Sun Jul 07, 2019 10:07 pm

MikroTik have enough small and cheap APs that you can use without such an external USB ethernet adapter.
E.g. when you want a mAP 2n with one more ethernet port, take a look at the hAP lite.
This is not an option, I do have 3x 951`s, 2011 and recently bought ac^2. Ac^2 have only 5 ports, all of them are occupied, and I occasionally need to switch one more device (100Mbit), which is now done by switching my old Linksys with DDWRT, however, it's not an option since it's an only 100Mbit device, so I am betraying 1Gbps link to switch that external device. Buying another mikrotik router for this purpose is nonsense. Btw, DDWRT has great support for both those USB-ETH adapters.
Mikrotik will hopefully add support for plethora of peripherials in ROS v7 ... and I'm genuinely looking forward to see it in not-so-distant future.
It would be great, but really, I highly doubt that this will ever happen...
 
MikroGik
just joined
Posts: 15
Joined: Tue Dec 23, 2014 3:23 am

Re: Problems using AX8817X based USB-Ethernet adapters

Tue Oct 04, 2022 3:21 am

Hi Y'all,

I have an update for this old thread... Noticed on ROS 7.5 that my AX88179A chip-based USB3 to ethernet adapter is recognized, but as an LTE device. Interestingly, it seems to fully work! It shows up dynamically in /IP/DHCP Client and gets an IP. The brand is "CableCreation", USB 3.0 to 10/100/1000 Gigabit Wired LAN Network Adapter. https://www.amazon.com/dp/B013G4C8RE

My question to anyone at MikroTik is whether there a way to fix this so it shows up as an ethernet port?

Thanks!

Who is online

Users browsing this forum: Guntis, mogiretony and 98 guests