I picked up a couple CCR2116-12G-4S+ in hopes of replacing some Ubiquiti Edgerouters.
We have 3 separate ISP's and each has their own Ubiquiti Edgerouter. We do eBGP with each ISP, then iBGP between the 3 Edgerouters to share routes. This has worked great on the Ubiquiti routers.
I replaced 1 of the 3 Ubiquiti's with a CCR. I plan on replacing them all if I can get this working properly.
The eBGP to the ISP is working as expected. The CCR is receiving a full table and properly advertising our public /24 out to the ISP.
The iBGP session to the Ubiquiti routers comes up aok, but no BGP routes are sent to the Ubiquiti routers. The CCR is receiving routes from the Ubiquiti Edgerouters but its not using any of them.
If I enable Output Redistribute and select BGP, the BGP session fails to start. If I select connected or enable default originate, those routes are properly redistributed. I just can't get BGP routes to redistribute to iBGP peers
I am not sure what else is needed at this point. The documentation is lacking for v7 and 90% of the info out there is for v6 BGP.
For a router that touts BGP performance, the lacking documentation and bugs is concerning.