Device: HAP ap lite
Updated to latest: Router os
Objective: Dual failover

i have 2 lte links that reach about 4 mbits each trying to figure out how to do a balancing failover,
please assist.
no idea what i'm doing.

it seems you suggest using packet marks to tell what to go where.


so lets say my 1st wan gate way is:
192.168.1.1
and my second is:
192.168.20.1
and i want to use ether 3,4 and 5 as a local lan
idk no idea what a good local internal range for about 20 devices needs to be

how would i set this up then?
/ip address
add address=192.168.1.1/24 network=192.168.0.0 broadcast=192.168.0.255 interface=ether3
add address=10.111.0.2/30 network=10.111.0.0 broadcast=10.111.0.255 interface=ether1
add address=10.112.0.2/30 network=10.112.0.0 broadcast=10.112.0.255 interface=ether2

i could just try match my 2 wan connections routers to match the range.
thanks for the help i'll let you know the end result.

any good guides on QOS?