Code: Select all
/interface bridge
add ingress-filtering=no name=bridge1 protocol-mode=none vlan-filtering=yes
add ingress-filtering=no name=bridge2 protocol-mode=none vlan-filtering=yes
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=ether3
add bridge=bridge1 interface=ether4
add bridge=bridge1 interface=ether5
add bridge=bridge2 interface=ether6
add bridge=bridge2 interface=ether7
add bridge=bridge2 interface=ether8
add bridge=bridge2 interface=ether9
add bridge=bridge2 interface=ether10
Some time ago, there was a restriction that only the first bridge created could have HW offload, but I see the H flag in both.
RB1100AHx4 running ROS 7.6. Is this truly working, or H on second bridge wrongly shown?
Networks on bridge1 and bridge2 must be separated with no possibility to leak VLANs, cause bridge loops etc.
RB1100AHx4 block diagram suggests it shoud work, I'm just making sure before I make a more complex setup.