Community discussions

MikroTik App
 
antleo
newbie
Topic Author
Posts: 47
Joined: Thu Dec 19, 2019 3:27 am

X710 SR-IOV VF not recognized as a NIC in CHR

Mon Nov 28, 2022 2:48 pm

Hey all,
I set up a new CHR with an x710 VF as it's NIC. However, the NIC is not recognized. They show up in System > Resources > PCI and are marked as Intel Corp Ethernet Virtual Function 700 Series (rev: 2), but don't show as ethernet interfaces. Is there a step I missed for getting this to work? CHR 7.6 on proxmox 7.2.7.

Image

Thanks!
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2095
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: X710 SR-IOV VF not recognized as a NIC in CHR

Tue Nov 29, 2022 12:47 am

I am certain that this used to work.

So, your best bet is to contact Mikrotik support through the web-portal or by emailing support@mikrotik.com
 
antleo
newbie
Topic Author
Posts: 47
Joined: Thu Dec 19, 2019 3:27 am

Re: X710 SR-IOV VF not recognized as a NIC in CHR

Mon Dec 05, 2022 10:01 pm

For those curious, I did open a support ticket (SUP-99556)

I'll report back once I have an update.
 
dominiaz
just joined
Posts: 20
Joined: Sat Jan 08, 2011 7:17 am

Re: X710 SR-IOV VF not recognized as a NIC in CHR

Sun Dec 11, 2022 10:33 am

I have the same and SR-IOV also doesnt work for me.

SR-IOV is working fine only on Mikrotik 7.1. It doesn't work anymore on Mikrotik versions 7.2 - 7.6.

Please fix it.
 
chubbs596
Frequent Visitor
Frequent Visitor
Posts: 90
Joined: Fri Dec 06, 2013 6:07 pm

Re: X710 SR-IOV VF not recognized as a NIC in CHR

Tue Dec 13, 2022 11:51 pm

I have the same and SR-IOV also doesnt work for me.

SR-IOV is working fine only on Mikrotik 7.1. It doesn't work anymore on Mikrotik versions 7.2 - 7.6.

Please fix it.
Same issue here, and if I use iommu passthrough , the interfaces also does come up for some reason, also using Intel X710 cards
 
SuperMiao
just joined
Posts: 7
Joined: Sun Mar 29, 2020 6:51 am

Re: X710 SR-IOV VF not recognized as a NIC in CHR

Wed Dec 14, 2022 8:11 pm

x722 VF same
Image
 
User avatar
inteq
Member
Member
Posts: 402
Joined: Wed Feb 25, 2015 8:15 pm
Location: Romania

Re: X710 SR-IOV VF not recognized as a NIC in CHR

Tue Jan 10, 2023 6:11 am

I use X722 on ESXI 8 with VMXNET3 and get 10 Gbps with minimal CPU usage.
vswitch is out of the question or why you need SR-IOV?

Who is online

Users browsing this forum: No registered users and 11 guests