Community discussions

MikroTik App
 
fedorovic
just joined
Topic Author
Posts: 2
Joined: Mon Nov 19, 2018 1:18 pm

no supported channel - after upgrade

Fri Jan 21, 2022 8:35 am

After upgrade from 6.48.6 to 7.1.1 on x86 server and rb18 (8 minipci cards) with level 5 license and extra-channels I can't set any frequency. Downgrade to v6 doesn't help. There is just "auto" frequency and I get "no supported channel" error.
 
User avatar
Shahid
newbie
Posts: 25
Joined: Sat Nov 05, 2016 3:31 am
Location: Multan, Pakistan
Contact:

Re: no supported channel - after upgrade

Sun Jun 05, 2022 2:23 am

Same Problem with me, After update from 6.48.6 wifi is not working on x86 level 4 licence with extra channels
Using Atheros AR9300
Errors
--No Supported Channel
--Scan list does not contain valid channels
--Empty scanlist


On 6.48.6 everything is working fine
 
holvoetn
Forum Guru
Forum Guru
Posts: 5321
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: no supported channel - after upgrade

Sun Jun 05, 2022 10:58 pm

Have seen that a couple of times.
In my case it was each time a mismatch between country setting and channel to be used
Ros7 is a lot more strict on that.

Can you check country setting and if the allowed channels for that setting are compatible with what you want to use ?
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Mon Jun 06, 2022 4:46 am

Have seen that a couple of times.
In my case it was each time a mismatch between country setting and channel to be used
Ros7 is a lot more strict on that.

Can you check country setting and if the allowed channels for that setting are compatible with what you want to use ?
Could you elaborate more? Which country you base? Can you make it work?

I encounter the same issue
 
holvoetn
Forum Guru
Forum Guru
Posts: 5321
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: no supported channel - after upgrade

Mon Jun 06, 2022 8:57 am

Assuming you are not using wifiwave2

From terminal
/interface wireless info country-info=<chosen country>

For wifiwave2
/interface/wifiwave2/info country-info=<chosen country>

It will show which channels etc are allowed for the selected country. Omit country-info parameter to get all countries.

For a lot if countries it is illegal to set wrong channels/width/... for wifi, hence the reason ROS7 is a lot more strict on which channel can be used for which country.

Selecting the right country is the user's responsibility!!
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Tue Jun 07, 2022 4:18 pm

Assuming you are not using wifiwave2

From terminal
/interface wireless info country-info=<chosen country>

For wifiwave2
/interface/wifiwave2/info country-info=<chosen country>

It will show which channels etc are allowed for the selected country. Omit country-info parameter to get all countries.

For a lot if countries it is illegal to set wrong channels/width/... for wifi, hence the reason ROS7 is a lot more strict on which channel can be used for which country.

Selecting the right country is the user's responsibility!!

Empty output from my x86 device. must be missing something
 
User avatar
Ca6ko
Member
Member
Posts: 498
Joined: Wed May 04, 2022 10:59 pm
Location: Kharkiv, Ukraine

Re: no supported channel - after upgrade

Fri Jun 10, 2022 2:16 pm

I recently encountered this problem when I set my list of channels 1, 6, 11. It turned out that there were continuing problems with the scan list name. If the name of the sheet begins with a number, we get an error message, if with a letter, everything works.
Also, if there is a dot in the list name, then the list name is imported incorrectly when exporting-importing the configuration.
PS hAP ac2 and ROS7.2.3
You do not have the required permissions to view the files attached to this post.
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Sun Jun 19, 2022 3:56 am

I am using an x86 and install an MikroTik R11e-5HacT
Always no supported channel
Screenshot 2022-06-19 at 8.52.28 AM.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11381
Joined: Thu Mar 03, 2016 10:23 pm

Re: no supported channel - after upgrade

Sun Jun 19, 2022 12:51 pm

Set installation to "any" ... the way MT understands the "indoor" is very restrictive ... device will select only channets which are allowed exclusively for indoor use ... and there might be none. Usually all channels are allowed for indoor and outdoor, but allowed Tx power might be lower when used outdoor.

You may also want to change band to "5GHz-n/ac" (omit a) and (for starters) channel width to 20MHz only.
 
User avatar
Ca6ko
Member
Member
Posts: 498
Joined: Wed May 04, 2022 10:59 pm
Location: Kharkiv, Ukraine

Re: no supported channel - after upgrade

Sun Jun 19, 2022 2:00 pm

@cklee234
Tap the Advanced mode button. The Scan List window appears. Check which list is selected there.
You can create your own Scan List and select it.
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Mon Jun 20, 2022 3:26 am

@cklee234
Tap the Advanced mode button. The Scan List window appears. Check which list is selected there.
You can create your own Scan List and select it.
I have manually added the scanlist and it appears in the scan list.
Unfortunately, it does not work upon trying one by one.

Besides, it should be a dual band card, it does not show up 2.4G.

The same for my older atheros.

Nevertheless, when I have time, I may try again in ROS version 6. and also in 32 bits. Currently it is version 7.4.beta in 64 bits mode.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11381
Joined: Thu Mar 03, 2016 10:23 pm

Re: no supported channel - after upgrade

Mon Jun 20, 2022 8:05 am

Besides, it should be a dual band card, it does not show up 2.4G.

Where did you get that idea? Official product page only mentions 5GHz radio. All product pages of products supporting both bands clearly mention that in specifications, even for Groove 52 which is dual-band capable single radio device (and one has to try a bit harder to find this crucial bit of information on product page). Just because radio chip has ability of running either band, it doesn't mean that particular card implementation offers it.
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Mon Jun 20, 2022 8:26 am

I see, my mistake
Last edited by BartoszP on Mon Nov 07, 2022 5:18 am, edited 1 time in total.
Reason: removed excessive quotting of preceding post; be wise, quote smart.
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Sat Jul 02, 2022 3:05 pm

May I know if V7 has x86 wifi driver included?
 
User avatar
Shahid
newbie
Posts: 25
Joined: Sat Nov 05, 2016 3:31 am
Location: Multan, Pakistan
Contact:

Re: no supported channel - after upgrade

Fri Sep 23, 2022 3:11 am

May I know if V7 has x86 wifi driver included?
Yup
i am using latest stable version 7.5 with Atheros AR9300 on x86 working excellent.
All the bugs are removed.
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Thu Oct 13, 2022 5:07 am

Can you share with me where you got the AR9300?

I have been using the mikrotik branded R11e-5HacT which is still not working
Last edited by BartoszP on Mon Nov 07, 2022 5:15 am, edited 1 time in total.
Reason: removed excessive quotting of preceding post
 
SMARTNETTT
just joined
Posts: 8
Joined: Mon Feb 11, 2019 9:07 pm

Re: no supported channel - after upgrade

Sat Oct 15, 2022 11:32 pm

some solution mikrotik ???
x86 v7+ no suport channels in 2,4ghz !!!
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Sun Oct 16, 2022 3:00 am

The support said it would be fixed. But so far, only "no support channels issue" has been fixed. still not yet able to connect to wifi device and works

Likely the driver is not fully activated
Last edited by BartoszP on Mon Nov 07, 2022 5:16 am, edited 1 time in total.
Reason: removed excessive quotting of preceding post
 
SMARTNETTT
just joined
Posts: 8
Joined: Mon Feb 11, 2019 9:07 pm

Re: no supported channel - after upgrade

Sun Nov 06, 2022 9:34 pm

MIKROTIK, Some Solution of this ? Please answer !!!!
 
SMARTNETTT
just joined
Posts: 8
Joined: Mon Feb 11, 2019 9:07 pm

Re: no supported channel - after upgrade

Mon Nov 07, 2022 12:18 am

MOKROTIK Some Answer ???
Last edited by BartoszP on Mon Nov 07, 2022 5:16 am, edited 1 time in total.
Reason: removed excessive quotting of preceding post
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Mon Nov 07, 2022 1:19 am

So far not working

I set is AP mode, wifi scan found the SSID but unable to connect. Frequency scan all - 130db
Last edited by BartoszP on Mon Nov 07, 2022 5:16 am, edited 1 time in total.
Reason: removed excessive quotting of preceding post
 
killersoft
Member Candidate
Member Candidate
Posts: 235
Joined: Mon Apr 11, 2011 2:34 pm
Location: Victoria, Australia

Re: no supported channel - after upgrade

Mon Nov 07, 2022 4:48 am

Have you tried the official mikrotik support channel.
https://mikrotik.com/support
or via email : support@mikrotik.com
 
SMARTNETTT
just joined
Posts: 8
Joined: Mon Feb 11, 2019 9:07 pm

Re: no supported channel - after upgrade

Mon Nov 07, 2022 4:54 am

NOT ANSWERED
Last edited by BartoszP on Mon Nov 07, 2022 5:17 am, edited 1 time in total.
Reason: removed excessive quotting of preceding post; be wise, quote smart.
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Tue Nov 08, 2022 1:12 am

Have you tried the official mikrotik support channel.
https://mikrotik.com/support
or via email : support@mikrotik.com
Yes, they replied me with a support ticket and to wait for their fixes
 
SMARTNETTT
just joined
Posts: 8
Joined: Mon Feb 11, 2019 9:07 pm

Re: no supported channel - after upgrade

Sat Nov 19, 2022 3:31 am

Finaly solved thanks for nothing Mikrotik
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11381
Joined: Thu Mar 03, 2016 10:23 pm

Re: no supported channel - after upgrade

Sat Nov 19, 2022 11:08 am

What was the solution then?
 
cklee234
newbie
Posts: 44
Joined: Tue Sep 29, 2020 6:49 am

Re: no supported channel - after upgrade

Sun Nov 20, 2022 3:45 am

Finaly solved thanks for nothing Mikrotik
Really, what was the fix?
 
SMARTNETTT
just joined
Posts: 8
Joined: Mon Feb 11, 2019 9:07 pm

Re: no supported channel - after upgrade

Sun Nov 20, 2022 6:39 am

mikrotik, your clients call
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11381
Joined: Thu Mar 03, 2016 10:23 pm

Re: no supported channel - after upgrade

Sun Nov 20, 2022 10:06 am

@SMARTNETTT, my question was directed towards you ... you posted that issue was solved without giving any details about solution. Such posts are IMO outright rude, specially towards people having seemingly similar issues and googling for solutions. Your post doesn't help them. At all.
 
User avatar
Shahid
newbie
Posts: 25
Joined: Sat Nov 05, 2016 3:31 am
Location: Multan, Pakistan
Contact:

Re: no supported channel - after upgrade

Thu Dec 01, 2022 1:11 pm

Can you share with me where you got the AR9300?

I have been using the mikrotik branded R11e-5HacT which is still not working
Model: AW-NB097H
I bought it from Aliexpress
using it in HP T610 Plus Thin Client which comes with mini pcie slot, along with PCIE slot for extending LAN interfaces
https://www.aliexpress.com/item/1005003351247270.html
 
SMARTNETTT
just joined
Posts: 8
Joined: Mon Feb 11, 2019 9:07 pm

Re: no supported channel - after upgrade

Thu Jan 19, 2023 5:43 am

@SMARTNETTT, my question was directed towards you ... you posted that issue was solved without giving any details about solution. Such posts are IMO outright rude, specially towards people having seemingly similar issues and googling for solutions. Your post doesn't help them. At all.
the problem is : mikrotik no contesta y nosotros somos sus ingenieros gratis??? eso no esta bien
 
holvoetn
Forum Guru
Forum Guru
Posts: 5321
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: no supported channel - after upgrade

Thu Jan 19, 2023 6:02 am

Didn't even need Google translate for that ...

It is still rude to keep the solution for yourself towards the rest of the users.

Who is online

Users browsing this forum: No registered users and 22 guests