Weirdly, I can get to send AT commands using serial-terminal but not through ppp-client at-chat: for number 0 (usb2) I get "output: ERROR: reply timeout", for number 1 (modem) I get "failure: Unable to acquire port!" (instructions: https://help.mikrotik.com/docs/display/ ... T+commands)
If I try to enable number 1 (ppp-out2) I get "Couldn't change Interface <ppp-out2> - No such info channel! (8)"
Thank you very much.
Some more info:
Code: Select all
[admin@KNOT] > /interface ppp-client print
Flags: X - disabled; R - running
0 X name="ppp-out1" max-mtu=1500 max-mru=1500 mrru=disabled port=usb2
data-channel=0 info-channel=0 apn="internet" pin="" user="" password=""
profile=default phone="" dial-command="ATDT" modem-init=""
null-modem=no dial-on-demand=yes add-default-route=yes
default-route-distance=1 use-peer-dns=yes keepalive-timeout=30
allow=pap,chap,mschap1,mschap2
1 X name="ppp-out2" max-mtu=1500 max-mru=1500 mrru=disabled port=modem
data-channel=2 info-channel=4 apn="internet" pin="" user="" password=""
profile=default phone="" dial-command="ATDT"
modem-init="AT+QGPSCFG="priority",1" null-modem=no dial-on-demand=yes
add-default-route=yes default-route-distance=1 use-peer-dns=yes
keepalive-timeout=30 allow=pap,chap,mschap1,mschap2
Code: Select all
/interface ppp-client set [find where port="modem"] info-channel=3
Having done this change, public IP comes and goes every few seconds. Info window remains not working.
PS: info-channel=2 seems to make work the "info" button and "at-chat" until next reboot. Maybe I got a broken unit? I'll try more sims