I do have to sites which are connected via EOIP.
EOIP transports several tagged VLAN (100,200) between the two bridges of the sites.
The default untagged (VLAN 1) network is not bridges between those sites.
Here is an example of one site:
Code: Select all
/interface eoip
add local-address=10.5.0.1 mtu=1500 name=EOIP-WG-ESP remote-address=10.5.0.9 tunnel-id=9
/interface bridge
add comment="Bridge to SFP+" name=LAN vlan-filtering=yes
/interface bridge port
add bridge=LAN interface=sfp-sfpplus1
add bridge=LAN frame-types=admit-only-vlan-tagged interface=EOIP-WG-ESP
/interface bridge vlan
add bridge=LAN tagged=LAN,sfp-sfpplus1,EOIP-WG-ESP vlan-ids=100
add bridge=LAN tagged=LAN,sfp-sfpplus1,EOIP-WG-ESP vlan-ids=200
Now I would like that tagged VLAN 600 on site A is transported over the EOIP and connects to default untagged (VLAN 1) on the bridge of site B. And VLAN 700 on site B connected to default LAN on site A.
Any ideas how to solve that with the "switch like" bridge configuration?
Thanks for any help and best regards
dksoft