i have 3 Audience running in my house. One on each floor. I have 3 SSIDs with different VLANs to organize my network and devices. This setup runs great for at least a year. After upgrading our iPhones and iPads to Version 16 they won't connect to any channel that is shared with other SSIDs. I put them into an another Wifi that uses a 5GHz channel exclusively and that works but the apple devices will disconnect/reconnect randomly. Maybe they would switch to 2.4GHz in that case and can't connect because 2.4GHz is shared between all SSIDs.
Here is my configuration:
Code: Select all
/interface bridge
add ingress-filtering=no name=bridgeLocal vlan-filtering=yes
/interface list
add name=WAN
add name=LAN
/interface wifiwave2 channel
add band=2ghz-n frequency=2412 name="CH 1" width=20mhz
add band=2ghz-n frequency=2437 name="CH 6" width=20mhz
add band=2ghz-n frequency=2462 name="CH 11" width=20mhz
add band=5ghz-ac frequency=5500 name="CH 100"
add band=5ghz-ac frequency=5580 name="CH 116"
add band=5ghz-ac frequency=5180 name="CH 36"
add band=5ghz-ac frequency=5260 name="CH 52"
/interface wifiwave2 security
add authentication-types=wpa2-psk,wpa3-psk name=Private-WPA passphrase=*****
add authentication-types=wpa2-psk,wpa3-psk name=Guest-WPA passphrase=*****
add authentication-types=wpa2-psk,wpa3-psk name=Public-WPA passphrase=*****
/interface wifiwave2 configuration
add name=Private security=Private-WPA ssid=WL_PRIV
add name=Public security=Public-WPA ssid=WL_PUB
add name=Guest security=Guest-WPA ssid=WL_GUEST
/interface wifiwave2
set [ find default-name=wifi1 ] channel="CH 1" configuration=Private configuration.mode=ap disabled=no name="2.4GHz Private" disable-running-check=yes
set [ find default-name=wifi3 ] channel="CH 100" configuration=Private configuration.mode=ap disabled=no name="5.5GHz Private" disable-running-check=yes
set [ find default-name=wifi2 ] channel="CH 36" configuration=Public configuration.mode=ap disabled=no name="5GHz Public" disable-running-check=yes
add configuration=Public configuration.mode=ap disabled=no master-interface="2.4GHz Private" name="2.4GHz Public" disable-running-check=yes
add configuration=Guest configuration.mode=ap disabled=no master-interface="2.4GHz Private" name="2.4GHz Guest" disable-running-check=yes
add configuration=Guest configuration.mode=ap disabled=no master-interface="5GHz Public" name="5GHz Guest" disable-running-check=yes
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
sword,web,sniff,sensitive,api,romon,dude,rest-api"
/interface bridge port
add bridge=bridgeLocal ingress-filtering=no interface=ether1
add bridge=bridgeLocal ingress-filtering=no interface=ether2
add bridge=bridgeLocal interface="2.4GHz Guest" pvid=99
add bridge=bridgeLocal interface="5GHz Guest" pvid=99
add bridge=bridgeLocal interface="2.4GHz Private" pvid=1030
add bridge=bridgeLocal interface="5.5GHz Private" pvid=1030
add bridge=bridgeLocal interface="2.4GHz Public" pvid=1020
add bridge=bridgeLocal interface="5GHz Public" pvid=1020
/interface bridge vlan
add bridge=bridgeLocal tagged=bridgeLocal,ether1 vlan-ids=1030
add bridge=bridgeLocal tagged=bridgeLocal,ether1 vlan-ids=1020
add bridge=bridgeLocal tagged=bridgeLocal,ether1 vlan-ids=99
/interface list member
add interface=ether1 list=LAN
add interface=ether2 list=LAN
/ipv6 settings
set disable-ipv6=yes
/ip dhcp-client
add interface=bridgeLocal
/system clock
set time-zone-name=Europe/Berlin
/system identity
set name="Audience-DG"
/system leds settings
set all-leds-off=immediate
/system routerboard settings
set auto-upgrade=yes
Any ideas what I can try?
Thank you!