https://help.mikrotik.com/docs/display/ ... tion+Group
Bond appears to be up, LACP is working from what I can tell. What I don't know is how to apply an IP address to the client-bond interface, if that makes sense? Links are up, but no matter where I apply the address (and again, I'm showing my ignorance here) I can't get a response from the "client" in the picture.
Code: Select all
/interface bridge
add name=bridge1 vlan-filtering=yes
/interface bonding
add mlag-id=1001 mode=802.3ad name=client-bond slaves=sfp-sfpplus24
/interface bridge mlag
set bridge=bridge1 peer-port=qsfpplus1-1
/interface bridge port
add bridge=bridge1 interface=qsfpplus1-1 pvid=99
add bridge=bridge1 interface=client-bond
/interface bridge vlan
add bridge=bridge1 tagged=qsfpplus1-1 vlan-ids=1