Hi,
Newbie here.
I have 2 x networks
I get Internet from Network1 for Network2 over the WAN port.
I need access to PC X Network1 from PC Y1 from Network2
Can you please assist with the firewall rule that will be required to make this possible.
Thanks
[Edit]
I've attached the current config.
Note: The IPs used in this test environment in this config is slightly different than the image:
Network 1 - DHCP 192.168.77.0/24
Network 1 PC X - 192.168.77.116
Network 2 WAN - 192.168.77.114
Network 2 - DHCP 192.168.81.0/24
Network 2 PC Y1 - 192.168.81.254
I used the basic configuration setup as described here:
https://help.mikrotik.com/docs/display/ ... figuration
I have not added any Firewall rule, as I tried to avoid accidentally blocking the access Im trying to achieve.
/interface bridge
add name=local
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=hotspot
/ip pool
add name=dhcp_pool0 ranges=192.168.81.2-192.168.81.254
/ip dhcp-server
add address-pool=dhcp_pool0 disabled=no interface=local name=dhcp1
/interface bridge port
add bridge=local interface=ether2
add bridge=local interface=ether3
add bridge=local interface=ether4
add bridge=local interface=ether5
/ip address
add address=192.168.81.1/24 interface=local network=192.168.81.0
/ip dhcp-client
add disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.81.0/24 dns-server=192.168.81.1 gateway=192.168.81.1
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
/system clock
set time-zone-name=Africa/Johannesburg