I had the devices ping each other over wireguard on 7.9 but now on 7.10 I can't do that.
Is there any know issue with that?
## EDIT
OK SO I found out what was the problem in my config on RouterOS.
I tried to understand what's wrong and eventually looked at:
https://markeclaudio.github.io/mikrotik ... generator/
which generated for me a set of configurations.
For example:
/interface wireguard
add listen-port=13231 mtu=1420 name=wg0 private-key="GDVFiBwfUaZWwWmNK3fiqfBs8ipOrgHJ0XCysM07AHE="
/ip firewall filter
add action=accept chain=input comment="Allow Wireguard from All" dst-port=13231 protocol=udp
/ip address
add address=172.22.0.1/24 comment="Wireguard Interface" interface=wg0 network=172.22.0.0
/interface wireguard peers
add allowed-address=172.22.0.2/32 comment="Client_2" endpoint-address=172.22.0.2 interface=wg0 public-key="Tuai6kXV1a/q9ZY4OPHwb0p/WUkPpOQEePbc9XZj9kw="
add allowed-address=172.22.0.3/32 comment="Client_3" endpoint-address=172.22.0.3 interface=wg0 public-key="aWGPG3x+TnivOjyAg6HEmtL/c5NJ/ZcBl/fqnsdTbVI="
add allowed-address=172.22.0.4/32 comment="Client_4" endpoint-address=172.22.0.4 interface=wg0 public-key="4nlmTSs+Y7DJJq6TUXHCOkjJAG6R2B6bYb+n28aoTFA="`
And what I noticed that there is an endpoint-address defined per client.
Which... I have not used in my 7.9.2 and worked fine.
When I am adding the endpoint-address of the peer it works as expected and I can ping each end and also can use the endpoint address for routing and other things.
I remember that in 7.9.2 it worked so it's worth testing and add it to the change log and documentation.