Hello,
I have two cap ac access points that I want to power with active POE switch but they don't want to turn on.
The product specification and the user manual states, that cap ac supports PoE in 802.3af/at which is exactly what this little switch does.
https://www.tendacn.com/en/product/spec ... 4-63W.html PoE supply management Port 1 to Port 4 support IEEE802.3at/af PoE standard
If I connect a non mikrotik device to it, different vendor AP or IP phone they both power on immediately, so I guess the switch is not a problem.
If the caps are connected to port 5 of hap ac or included POE injector, both passive POE, they power on without a problem.
Are the cap-ac defective?
Best regards,
Uros