Community discussions

MikroTik App
 
mikea
just joined
Topic Author
Posts: 9
Joined: Fri Mar 20, 2015 1:38 pm

CCR-2116 "Dead" after power loss

Sun Jan 22, 2023 3:51 pm

Hello, today after a power loss we ve "lost" a CCR-2116 router.
We tryied to reset - netinstall it with no success.
Via Console we are getting the following distrubing message!
stage2_loader v3.63.2
Memory repair completed within 226 uSecs
DDR ECC static poisoning address: (0x1e0000)
DDR ECC static poisoning address: (0x1e1100)
SPD I2C Address: 52, offset 0000(0)
DRAM ch 0: 8GB
SPD I2C Address: 53, offset 0000(0)
DRAM ch 1: 8GB
DRAM total size: 16GB
al_flash_obj_data_load: data checksum validation failed!
al_flash_obj_data_load failed!
Is there any way to recover this error - issue?
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11383
Joined: Thu Mar 03, 2016 10:23 pm

Re: CCR-2116 "Dead" after power loss

Sun Jan 22, 2023 5:43 pm

I suggest you to open ticket with MT support. Even if you strongly suspect that warranty doesn't cover the fault.

I don't expect too many forum members to have experience with exactly the same fault. OTOH I'm pretty sure some MT engineer will immediately know exactly what's going on.
 
Reeman
just joined
Posts: 10
Joined: Thu Sep 01, 2022 12:13 pm

Re: CCR-2116 "Dead" after power loss

Sun Sep 17, 2023 11:09 am

I have the same thing with CCR2116 , could you solve the problem?

Who is online

Users browsing this forum: No registered users and 25 guests