In the 7.x version system, a wireless interface and a wired interface are added to the mesh, and a dhcp server is set on the mesh interface.
The result is that the IP address can be obtained normally through the wired interface, but cannot be obtained through the wireless connection.
In the 6.x version system, both ways can obtain the IP address normally.
Is this a bug in the 7.x system? Or does the new version change the configuration?
Code: Select all
/ip dhcp-client
add interface=ether1
/ip dns
set allow-remote-requests=yes
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa-psk,wpa2-psk eap-methods="" group-ciphers=\
tkip,aes-ccm mode=dynamic-keys name=profile1 supplicant-identity="" \
unicast-ciphers=tkip,aes-ccm
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-eC \
disabled=no frequency=auto mode=ap-bridge radio-name=AP1 \
security-profile=profile1 ssid=Mesh-Clients
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=\
20/40/80mhz-Ceee disabled=no frequency=auto mode=ap-bridge radio-name=AP1 \
security-profile=profile1 ssid=Mesh-Clients
/ip pool
add name=dhcp_pool0 ranges=192.168.88.2-192.168.88.254
/ip dhcp-server
add address-pool=dhcp_pool0 interface=mesh1 name=dhcp1
/ip dhcp-server network
add address=192.168.88.0/24 gateway=192.168.88.1
/interface mesh
add name=mesh1
/interface mesh port
add interface=ether2 mesh=mesh1
add interface=ether3 mesh=mesh1
add interface=ether4 mesh=mesh1
add interface=ether5 mesh=mesh1
add interface=wlan1 mesh=mesh1
add interface=wlan2 mesh=mesh1
/ip address
add address=192.168.88.1/24 interface=mesh1 network=192.168.88.0
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1-public src-address=\
192.168.88.0/24