I just bought a Mikrotik CRS309-1G-8 for the purpose of using it as my out-of-band iSCSI storage VLAN. The plan is for the 1G interface to be my management interface (connecting to my other switch) and the rest as iSCSI VLAN (172,173) to enable iSCSI multipathing. I can get my management interface up and reachable but not my other 2 VLANs. My systems on the SFP ports cannot ping each other or the gateway (gateway is added for testing. I don't need any address to be routeable)
Appreciate any help with my configuration.. I am struggling as this is very different from configuring other switches such as Aruba/Cisco. BTW, I am not switching to SwitchOS as I understand the configuration is Web (no HTTPS/SSH).
Here is my configuration
Code: Select all
/interface bridge
add admin-mac=<redacted> auto-mac=no name=MgmtBridge
add name=iSCSI-Bridge
/interface vlan
add interface=MgmtBridge name=Mgmt111 vlan-id=111
add interface=iSCSI-Bridge name=iSCSIBridge_172 vlan-id=172
add interface=iSCSI-Bridge name=iSCSIBridge_173 vlan-id=173
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=hotspot
/port
set 0 name=serial0
/interface bridge port
add bridge=MgmtBridge interface=ether1 pvid=995
add bridge=iSCSI-Bridge interface=sfp-sfpplus1
add bridge=iSCSI-Bridge interface=sfp-sfpplus2
add bridge=iSCSI-Bridge interface=sfp-sfpplus3
add bridge=iSCSI-Bridge interface=sfp-sfpplus4
/interface bridge vlan
add bridge=MgmtBridge tagged=MgmtBridge vlan-ids=111
add bridge=iSCSI-Bridge tagged=iSCSI-Bridge,sfp-sfpplus1,sfp-sfpplus2,sfp-sfpplus3,sfp-sfpplus4 vlan-ids=172,173
/ip address
add address=172.16.11.13/27 interface=MgmtBridge network=172.16.11.0
add address=192.168.172.1/28 interface=iSCSIBridge_172 network=192.168.172.0
add address=192.168.173.1/28 interface=iSCSIBridge_173 network=192.168.173.0
/ip route
add disabled=no distance=1 dst-address=0.0.0.0/0 gateway=172.16.11.1 pref-src="" routing-table=main scope=10 suppress-hw-offload=no target-scope=10
/system ntp client servers
add address=172.16.12.12
/system routerboard settings
set boot-os=router-os