Community discussions

MikroTik App
 
gezir
just joined
Topic Author
Posts: 12
Joined: Sat Jan 27, 2018 8:16 pm

bandwidth speed limit for range ip ( from 20 to 80)

Tue Jan 24, 2023 5:31 pm

Hi,
I have mikrotik router and I need to do bandwidth speed limit for range ip
For example for '192.168.88.20 to 192.168.88.80' I need set download set 8MB and Upload 5MB
How can I do ?
 
erlinden
Forum Guru
Forum Guru
Posts: 1920
Joined: Wed Jun 12, 2013 1:59 pm
Location: Netherlands

Re: bandwidth speed limit for range ip ( from 20 to 80)

Tue Jan 24, 2023 5:36 pm

 
gezir
just joined
Topic Author
Posts: 12
Joined: Sat Jan 27, 2018 8:16 pm

Re: bandwidth speed limit for range ip ( from 20 to 80)

Tue Jan 24, 2023 5:52 pm

This not for specific range ips
 
akakua
Frequent Visitor
Frequent Visitor
Posts: 50
Joined: Mon Apr 06, 2020 4:52 pm

Re: bandwidth speed limit for range ip ( from 20 to 80)

Tue Jan 24, 2023 6:26 pm

you can specify a mask instead of an address. for example 192.168.88.0/26, so the queue will cover the range 192.168.88.0-192.168.88.63
 
gezir
just joined
Topic Author
Posts: 12
Joined: Sat Jan 27, 2018 8:16 pm

Re: bandwidth speed limit for range ip ( from 20 to 80)

Tue Jan 24, 2023 8:23 pm

you can specify a mask instead of an address. for example 192.168.88.0/26, so the queue will cover the range 192.168.88.0-192.168.88.63
No , I need for IPs '192.168.88.20 to 192.168.88.80'
 
holvoetn
Forum Guru
Forum Guru
Posts: 5403
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: bandwidth speed limit for range ip ( from 20 to 80)

Tue Jan 24, 2023 9:11 pm

Multiple simple queues with appropriate mask then.
Combination of them all should cover your range.
Look for solutions, not problems.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 3291
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: bandwidth speed limit for range ip ( from 20 to 80)

Tue Jan 24, 2023 10:09 pm

Since you are using decimal number in a hex number settings, you need multiple subnets.
Better if you setup range using 16/32/64/128 etc, not 20,80.. Then one subnet would be needed.
This will cover from 20 to 80.

192.168.88.20/30 20-23
192.168.88.24/28 24-31
192.168.88.32/27 32-63
192.168.88.64/28 64-79
192.168.88.64/32 80


----------------------------------------------------------------------------------------
Use Splunk> to log/monitor your MikroTik Router(s). See link below. :mrgreen:

MikroTik->Splunk

Who is online

Users browsing this forum: Ahrefs [Bot], Energizer, johnson73, straightslant and 79 guests