Community discussions

MikroTik App
 
terintamel
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 99
Joined: Sun Sep 05, 2010 3:09 am

ROS 7.7 BGP Warnings?

Wed Jan 25, 2023 4:54 pm

I recently migrated from an x86 CHR running ROS v6 to a CCR2116 running 7.7. I copied my configs and setup the BGP using the equivalent v7 settings. Everything is working fine, but I get the following warnings when the BGP sessions are established and then again every couple of days. This happens on both my BGP peers. I received no warnings or errors when I was using my v6 BGP router.

What does it mean and should I be concerned?
route,bgp,warning Edge Router (CCR): Received AS_PATH with a SET segment followed by a SEQUENCE segment, converting it to a SET segment
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 7038
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: ROS 7.7 BGP Warnings?

Wed Jan 25, 2023 5:05 pm

AS path can be encoded in two ways, as set and sequence.
Warning indicates that peer received aggregated route where part of the as path is encoded as set and other as sequence, and converts whole as path to as set.
 
terintamel
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 99
Joined: Sun Sep 05, 2010 3:09 am

Re: ROS 7.7 BGP Warnings?

Wed Jan 25, 2023 5:16 pm

AS path can be encoded in two ways, as set and sequence.
Warning indicates that peer received aggregated route where part of the as path is encoded as set and other as sequence, and converts whole as path to as set.
Is that a problem with the setup on my end and does it need to be corrected?
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 7038
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: ROS 7.7 BGP Warnings?  [SOLVED]

Wed Jan 25, 2023 5:34 pm

No, there is nothing wrong in your setup.

Who is online

Users browsing this forum: No registered users and 9 guests