Hello,
I have a RBD53iG-5HacD2HnD (hAP ac³) configured to route traffic. It has a VPN tunnel up and passing traffic but only if I source the ping from the bridge (LAN side) interface. Hosts on the same LAN subnet cannot get a response to a ping. I have placed this router in parallel to an ASA on site. The hAP ac3 has an IP of 192.168.50.4/23 from the same subnet as the "inside" interface of a Cisco ASA with IP 192.168.50.2/23. Hosts on the inside network have a default route to the ASA and the ASA has a route to the hAP ac3. The Host's can ping both the hAP and the ASA. But when I do a trace from a host, the ASA routes the traffic out it's outside interface. When I do a trace from the ASA itself, it routes out to hap ac3 router. What am I missing?
I have attached a copy of the hap ac3 export