Community discussions

MikroTik App
 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 419
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Traffic Flow ( netflow) Autonomous system information

Mon Aug 02, 2010 11:30 pm

Hi,


there's any way to mikrotik "stamp" the AS information in trafficflow ? like cisco running bgp?

Thanks!
 
User avatar
Eising
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Oct 27, 2008 10:21 am
Location: Copenhagen, Denmark

Re: Traffic Flow ( netflow) Autonomous system information

Fri Aug 06, 2010 8:42 am

There's currently no way of doing that, however I've suggested it to MikroTik before and they were positive towards implementing it, so I suggest you (and everyone else who need this) start e-mailing support@mikrotik.com about it.
 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 419
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Aug 06, 2010 4:46 pm

that was exectly what i did last week, opened a support ticket about these feature.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2096
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sun Aug 08, 2010 8:40 am

I have emailed them too. This would be very useful in combination with nfacct
 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 419
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sun Aug 08, 2010 3:57 pm

we´re now connecting to a mutiple peers ( transit) and IXPs. So the ASN information is very useful to know when or where buy more access to Ixp or transport networks , or who AS is better to do some bidirectional traffic agreements.
 
alexandrecorrea
just joined
Posts: 22
Joined: Fri Sep 22, 2006 6:18 pm
Location: Sacramento, MG, Brasil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Wed Aug 25, 2010 5:46 am

also sent two emails to support, but I believe they will not implement this in future versions.

This option is essential for anyone who uses BGP with IXP's...


I'm pulling down all mikrotik routers, switching back to cisco boxes because i need AS info on flow !! I like mikrotik as router.. BUT some features need more priority !! (like exportin AS info in flows) and run BIRD as bgp daemon !!!


:)
 
User avatar
Eising
Member Candidate
Member Candidate
Posts: 272
Joined: Mon Oct 27, 2008 10:21 am
Location: Copenhagen, Denmark

Re: Traffic Flow ( netflow) Autonomous system information

Thu Aug 26, 2010 4:04 pm

MikroTik needs to fix it's netflow in general. Every time I try it, I get a new bug. I have enabled it on four different BGP routers all with four different non-reproducible bugs.
 
agshekeloh
just joined
Posts: 10
Joined: Tue May 03, 2011 11:09 pm
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Oct 20, 2011 5:33 pm

Mikrotik support answered my query on this.

"currently it is not possible. We will evaluate this feature and possibly add to
planned feature list."

So, there's the definitive answer.
 
User avatar
gustkiller
Member
Member
Topic Author
Posts: 419
Joined: Sat Jan 07, 2006 5:15 am
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Oct 21, 2011 9:37 pm

that will be awesome!
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2096
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Oct 21, 2011 11:35 pm

Mikrotik, please add this feature!!!
 
alexjhart
Member Candidate
Member Candidate
Posts: 197
Joined: Thu Jan 20, 2011 8:03 pm

Re: Traffic Flow ( netflow) Autonomous system information

Sun Mar 03, 2013 7:00 pm

+1
I am surprised this hasn't been implemented yet.
 
User avatar
EMOziko
Member Candidate
Member Candidate
Posts: 129
Joined: Mon Aug 23, 2010 9:42 pm
Location: Georgia

Re: Traffic Flow ( netflow) Autonomous system information

Sun Mar 10, 2013 4:11 pm

I was searching about this and just found this thread. Please Mikrotik add this feature.
 
AlArenal
Member Candidate
Member Candidate
Posts: 131
Joined: Thu Aug 01, 2013 5:24 pm
Location: Iserlohn, Germany

Re: Traffic Flow ( netflow) Autonomous system information

Thu Sep 26, 2013 4:00 pm

+1 for BGP AS in flows
 
hapi
Member Candidate
Member Candidate
Posts: 232
Joined: Fri Mar 11, 2011 11:21 am
Location: Czech Republic

Re: Traffic Flow ( netflow) Autonomous system information

Thu Sep 26, 2013 4:14 pm

and add CISCO NAT (NEL) (NAT event logging) to traffic flow.
 
mhviper
newbie
Posts: 36
Joined: Wed Sep 25, 2013 4:59 am

Re: Traffic Flow ( netflow) Autonomous system information

Thu Dec 05, 2013 6:54 pm

bump this. It's an essential feature for everyone how is really working with ccr.
 
robertik
just joined
Posts: 10
Joined: Tue Dec 04, 2012 2:45 pm

Re: Traffic Flow ( netflow) Autonomous system information

Wed Apr 02, 2014 4:53 pm

+1 - with 20 peers it is really needed
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 776
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sun Apr 06, 2014 2:36 am

*bump*
 
mhviper
newbie
Posts: 36
Joined: Wed Sep 25, 2013 4:59 am

Re: Traffic Flow ( netflow) Autonomous system information

Thu Feb 26, 2015 4:31 pm

*bump because it's important*
 
unixman
just joined
Posts: 2
Joined: Mon Dec 30, 2013 7:43 pm

Re: Traffic Flow ( netflow) Autonomous system information

Tue May 26, 2015 8:45 pm

Can't agree more. Writing a netflow application, it is fundamental. Go for it !
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 776
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Traffic Flow ( netflow) Autonomous system information

Tue Jun 02, 2015 4:54 pm

Also, can we have S-Flow?
 
neptune
just joined
Posts: 9
Joined: Tue Jul 09, 2013 3:00 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon Aug 10, 2015 3:49 pm

*bump because it's important*
+1
 
neptune
just joined
Posts: 9
Joined: Tue Jul 09, 2013 3:00 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon Aug 10, 2015 3:55 pm

I could not agree more.

For the moment I have to configure a dedicated box to peer with all my EP routers to know where is my traffic going through
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2096
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Thu Aug 13, 2015 1:28 pm

5 years later, still waiting...
 
User avatar
StubArea51
Trainer
Trainer
Posts: 1739
Joined: Fri Aug 10, 2012 6:46 am
Location: stubarea51.net
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Aug 13, 2015 3:58 pm

+1 for this and BGP session status in SNMP.

Oh and OAM for ethernet.....ok i'll stop now :D
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2096
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Aug 13, 2015 4:13 pm

+1 for this and BGP session status in SNMP.

Oh and OAM for ethernet.....ok i'll stop now :D
Strange, I have emailed Mikrotik support requesting both of those features.
 
User avatar
Cha0s
Forum Guru
Forum Guru
Posts: 1139
Joined: Tue Oct 11, 2005 4:53 pm

Re: Traffic Flow ( netflow) Autonomous system information

Sat Nov 14, 2015 5:21 pm

+1 :)
 
jmginer
Member Candidate
Member Candidate
Posts: 153
Joined: Tue Dec 11, 2012 4:56 am
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Dec 18, 2015 9:34 pm

I agree :)
+1
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 776
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Dec 19, 2015 3:32 am

IPFIX and S-Flow too.
 
User avatar
nz_monkey
Forum Guru
Forum Guru
Posts: 2096
Joined: Mon Jan 14, 2008 1:53 pm
Location: Over the Rainbow
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Dec 19, 2015 4:52 am

IPFIX and S-Flow too.
+1 sflow is a must for rapid DDoS detection.
 
User avatar
Hammy
Forum Veteran
Forum Veteran
Posts: 776
Joined: Fri May 28, 2004 5:53 pm
Location: DeKalb, IL
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Dec 19, 2015 5:11 am

Flowspec goes along with DDoS mitigation of flows.
 
User avatar
ploquets
Member Candidate
Member Candidate
Posts: 162
Joined: Tue Nov 17, 2015 12:49 pm
Location: Uruguaiana, RS, Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Mon Feb 08, 2016 12:22 am

+1 for AS information on netflow!!!
 
chubbs596
Frequent Visitor
Frequent Visitor
Posts: 90
Joined: Fri Dec 06, 2013 6:07 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon May 23, 2016 10:31 am

+1 for AS information on netflow!!!
 
User avatar
bajodel
Long time Member
Long time Member
Posts: 551
Joined: Sun Nov 24, 2013 8:30 am
Location: Italy

Re: Traffic Flow ( netflow) Autonomous system information

Tue May 24, 2016 9:48 am

+1 ..
 
asturmas
just joined
Posts: 14
Joined: Mon Jan 27, 2014 8:50 pm

Re: Traffic Flow ( netflow) Autonomous system information

Fri Jun 10, 2016 5:04 am

+1 feature for ROSv7 i think..
 
riaanmaree
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Thu Aug 31, 2006 10:42 pm
Location: Johannesburg, South Africa
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Jun 16, 2016 11:17 pm

We also need this

Sent from my SM-G925F using Tapatalk
 
User avatar
tomasi
Frequent Visitor
Frequent Visitor
Posts: 99
Joined: Fri Oct 03, 2014 6:40 pm
Location: Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Tue Aug 16, 2016 8:29 pm

+1 :D
 
ropebih
Member Candidate
Member Candidate
Posts: 113
Joined: Tue May 22, 2007 5:35 pm

Re: Traffic Flow ( netflow) Autonomous system information

Sat Sep 10, 2016 6:00 pm

+1 sflow
 
borisk
Frequent Visitor
Frequent Visitor
Posts: 97
Joined: Mon Jul 04, 2016 10:02 pm
Location: Nizhniy Tagil, Russia

Re: Traffic Flow ( netflow) Autonomous system information

Sun Sep 11, 2016 7:41 pm

+1 and bird!
 
bmv
just joined
Posts: 17
Joined: Sun Aug 15, 2010 1:15 pm

Re: Traffic Flow ( netflow) Autonomous system information

Tue Sep 13, 2016 10:55 am

+1.
Have enquired separately on this forum before about this I believe.
 
User avatar
omidkosari
Trainer
Trainer
Posts: 640
Joined: Fri Sep 01, 2006 4:18 pm
Location: Canada, Toronto

Re: Traffic Flow ( netflow) Autonomous system information

Mon Nov 21, 2016 4:15 pm

+1 or a workaround !!
 
User avatar
ploquets
Member Candidate
Member Candidate
Posts: 162
Joined: Tue Nov 17, 2015 12:49 pm
Location: Uruguaiana, RS, Brazil
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Thu Jan 19, 2017 10:42 pm

bump!
 
riaanmaree
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Thu Aug 31, 2006 10:42 pm
Location: Johannesburg, South Africa
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Sat Jan 28, 2017 5:09 pm

Yup. Still waiting for this feature...

Sent from my SM-G925F using Tapatalk
 
mmabob
just joined
Posts: 6
Joined: Wed May 28, 2014 5:46 am

Re: Traffic Flow ( netflow) Autonomous system information

Fri Jul 14, 2017 6:41 pm

+1

We need this feature.
 
berlo
newbie
Posts: 45
Joined: Sat May 13, 2017 5:11 pm

Re: Traffic Flow ( netflow) Autonomous system information

Mon Jul 17, 2017 3:06 am

As workaround configure on vm/server nprobe + ntopng. You can create virtual interface. For example create a file /etc/ntopng/nprobe-mikrotik.conf
--zmq="tcp://*:42165"
--collector-port=9996
-n=none
-i=none
where 9996 is the port where you receive flow.

create ntopng.conf file and insert


-G=/var/run/ntopng.pid
-i=tcp://127.0.0.1:42165

start it and connect to https://yourserver:3000

Go under Hosts -> Autonomous Systems and you will be able to see flow grouped for AS
 
alfredo
newbie
Posts: 43
Joined: Wed Jul 01, 2015 3:06 pm

Re: Traffic Flow ( netflow) Autonomous system information

Wed Aug 23, 2017 3:00 pm

+1, it would be awesome to get AS numbers in netflow. As others said, any serious traffic analysis at the AS level is not possible without this.
 
cmurrayis
Member Candidate
Member Candidate
Posts: 106
Joined: Fri May 15, 2009 4:31 am

Re: Traffic Flow ( netflow) Autonomous system information

Thu Aug 27, 2020 5:34 am

+100 we need this
 
schorsch
newbie
Posts: 36
Joined: Mon Oct 11, 2004 5:21 pm
Location: Germany

Re: Traffic Flow ( netflow) Autonomous system information

Sun Feb 21, 2021 6:35 pm

Is it really true, that after more then 10 years of the feature request(s) this "feature" is not already implemented?
Or am I doing something wrong at the configuration?
I get adresses and protocols.... but no AS information...

If routos is not able to deliver this information, do you have any hint for me to get this informatioen (except replace with cisco/juniper ;) ).


Regards
Thomas
 
User avatar
tishri
Frequent Visitor
Frequent Visitor
Posts: 56
Joined: Sat Oct 03, 2009 4:13 pm
Location: Philippines
Contact:

Re: Traffic Flow ( netflow) Autonomous system information

Fri Nov 19, 2021 12:50 pm

+100000000000000000 . We spend so much on mikrotik. What are they doing?
 
ilmars
just joined
Posts: 4
Joined: Thu Jun 21, 2018 11:19 pm

Re: Traffic Flow ( netflow) Autonomous system information

Fri Jan 27, 2023 4:23 pm

That would be a really useful information. +1000

Who is online

Users browsing this forum: No registered users and 18 guests