I am trying to set up an IP camera remotely. The IP camera's defaul IP is 192.168.1.108
I am at site A with a hEX at 192.168.2.2
The camera is at site B with a hAP at 192.168.20.1
They have a wireguard connection between them.
From my PC (192.168.2.22) I can ping 192.168.20.1, as well as other devices physically located at site B in the 192.168.20.x subnet.
I added the IP ADDRESS 192.168.1.100/24 to the hAP assigned to the bridge (which includes all the physical ethernet ports).
From winbox connected to site B (192.168.20.1) I can ping 192.168.1.108 (the camera).
From winbox connected to site A (192.168.2.2) I can ping 192.168.1.100 (the router at B) but not 192.168.1.108 (camera).
From my PC (192.168.2.22) I can ping 192.168.1.100, but not 192.168.1.108
But, I need to access the camera with a web browser to change it's IP address and I am unable to get connectivity from my PC (192.168.2.22).
Using packet sniffer on the hEX (192.168.2.2) I can see my ping attempts to 192.168.1.108 go out but nothing coming back.
Using packet snigger on the hAP (192.168.20.1 AND 192.168.1.100) I can see those same ping attempts created on 192.168.2.2 come in but no packets with a src of 192.168.1.108
It feels like 192.168.1.108 is not getting the ping packets except when they come from 192.168.1.100