Hello all,
hopefully someone can gude me how to archive the following result:
At the moment I have a default configuration with a subnet 10.0.0.0/24 and a wireguard Interface 10.0.99.0/24.
I want to setup a new "semi-isolated" subnet (10.11.1.0/24) on port 5 with internet access.
The Clients of the subnet 10.11.1.0/24 should have internet access but they MUST NOT have access to all other subnets.
The Clients of the subnet 10.0.0.0/24 and 10.0.99.0/24 should have access to the clients of the subnet 10.11.1.0/24
As I understood, the following tasks must be performed:
1. Remove Port 5 from default bridge
2. Setup subnet on Port 5
2a. Create new bridge oder VLAN on for port 5?
3. Setup Adresspool dhcp_tigo (10.11.1.50-10.11.1.100) for Subnet on Prot 5
4. Setup DHCP Server for Subnet on Port 5 with adresspool dhcp_tigo
5. Firewall config
Maybe I´m something missing.
It would be great if someone can guide me step-by-step how to archive this scenario via command-line.
Thank you very much.