Community discussions

MikroTik App
 
User avatar
qatar2022
Member Candidate
Member Candidate
Topic Author
Posts: 141
Joined: Mon Aug 24, 2020 11:12 am

2 IPS Aggregation

Wed Feb 01, 2023 9:11 am

Dear all
I have a question regarding Aggregation.
now I have 2 Huawei 4g CPE router and each one has 500mb DL so total 1GB DL
and I have MT RB5009 and I'm using NTH failover but the speed around 480mb
I watch serval video on YouTube about bonding that can do Aggregation to get full speed from both ISP router. or just use bonding between 2 or more MT devise

regards
 
AidanAus
Member Candidate
Member Candidate
Posts: 177
Joined: Wed May 08, 2019 7:35 am
Location: Australia
Contact:

Re: 2 IPS Aggregation

Thu Feb 02, 2023 7:20 am

The only way that you will see 1gb through a speed test is if you bend the interface and to establish a bond it must be set up from both sides of the link.
the load balancing is just that, you are pushing traffic out one OR the other gateway depending on the logic you have implemented.

If you realy want the aggregated speed for some reason you can do this by getting a CHR in the cloud then either using a vpn with an eoip tunnel or just an eoip tunnel into the CHR, bond the eoip interfaces then set your default route to go out the band interface :)

Who is online

Users browsing this forum: araqiel, Maggiore81, Marc1963 and 86 guests