I upgraded my home network to 2 hAP ax2 routers, one acting as a router, one acting as a AP.
I have multiple SSID's on multiple VLAN's and everythig is working fine until 2 days ago when i noticed that my thermostat for central heating is reporting that heating gateway is unreachable and when i tried to connect heating gateway back to network it was spitting out various errors such as DNS error or just an unknown error.
I also have my air conditioner, smart plugs, washing machine connected to the same WLAN and these devices have no problems at all... I tried to connect with my laptop to the WLAN and i have internet access, there is no DNS problem...
I tried to connect heating gateway to the LTE router from mikrotik and there device is working... I also tried to make new WLAN on main router, and i choose 2 GHz N and then G thinking that maybe device don't like ax but no luck... I can even see that router assign IP address to the device but device refuse to complete wizard and throw an error.
Here is AP config, maybe there is something wrong... Only diference is that ax2 is wifi wave2 and it's using default VLAN 1
Code: Select all
# jan/10/1970 03:09:39 by RouterOS 7.7
# software id = xxxx-xxxx
#
# model = C52iG-5HaxD2HaxD
# serial number =xxxxxxxxxxxx
/interface bridge
add name=bridge vlan-filtering=yes
/interface ethernet
set [ find default-name=ether1 ] comment="Trunk port (Uplink)"
set [ find default-name=ether2 ] comment="IPTV (VLAN40)"
set [ find default-name=ether3 ] comment="SECURITY_1 (VLAN20)"
set [ find default-name=ether4 ] comment="SECURITY_2 (VLAN20)"
set [ find default-name=ether5 ] comment="HOME (VLAN88)"
/interface vlan
add interface=bridge name=VLAN10_TEA_PC vlan-id=10
add interface=bridge name=VLAN20_SECURITY vlan-id=20
add interface=bridge name=VLAN30_IOT vlan-id=30
add interface=bridge name=VLAN40_IPTV vlan-id=40
add interface=bridge name=VLAN88_HOME vlan-id=88
/interface list
add include=all name=LAN
add name=Home
/interface wifiwave2 security
add authentication-types=wpa2-psk,wpa3-psk name=Home
add authentication-types=wpa-psk,wpa2-psk name=Security
add authentication-types=wpa-psk,wpa2-psk encryption="" name=IoT
/interface wifiwave2
set [ find default-name=wifi1 ] channel.band=5ghz-ax .frequency="" .width=\
20/40/80mhz comment=VLAN88_HOME configuration.country=Croatia .mode=ap \
.ssid="Gazdin novi WiFi" disabled=no mtu=1500 security=Home
set [ find default-name=wifi2 ] channel.band=2ghz-ax .frequency=2412 .width=\
20/40mhz comment=VLAN88_HOME configuration.country=Croatia .mode=ap \
.ssid="Gazdin novi WiFi" disabled=no security=Home
add comment=VLAN30_IoT configuration.country=Croatia .mode=ap .ssid=IoT \
disabled=no mac-address=XX:XX:XX:XX:XX:XX master-interface=wifi2 name=\
wifi3 security=IoT
add comment=VLAN20_Security configuration.country=Croatia .mode=ap .ssid=\
WiFi_CCTV disabled=no mac-address=XX:XX:XX:XX:XX:XX master-interface=\
wifi2 name=wifi4 security=Security
/port
set 0 name=serial0
/interface bridge port
add bridge=bridge frame-types=admit-only-vlan-tagged interface=ether1
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=ether2 pvid=40
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=ether3 pvid=20
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=ether4 pvid=20
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=*6 pvid=88
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=*7 pvid=88
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=ether5 pvid=88
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=wifi1 pvid=88
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=wifi2 pvid=88
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=wifi3 pvid=30
add bridge=bridge frame-types=admit-only-untagged-and-priority-tagged \
interface=wifi4 pvid=20
/ip neighbor discovery-settings
set discover-interface-list=Home
/ipv6 settings
set disable-ipv6=yes
/interface bridge vlan
add bridge=bridge tagged=ether1,bridge vlan-ids=10
add bridge=bridge tagged=ether1,bridge untagged=ether3,ether4,wifi4 vlan-ids=\
20
add bridge=bridge tagged=ether1,bridge untagged=wifi3 vlan-ids=30
add bridge=bridge tagged=ether1,bridge untagged=ether2 vlan-ids=40
add bridge=bridge tagged=bridge,ether1 untagged=ether5,wifi1,wifi2 vlan-ids=\
88
/interface list member
add interface=bridge list=LAN
add interface=VLAN10_TEA_PC list=LAN
add interface=VLAN20_SECURITY list=LAN
add interface=VLAN30_IOT list=LAN
add interface=VLAN40_IPTV list=LAN
add interface=VLAN88_HOME list=LAN
add interface=VLAN88_HOME list=Home
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www disabled=yes
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/system identity
set name=hAP_ax2_DB
/tool mac-server
set allowed-interface-list=none
/tool mac-server mac-winbox
set allowed-interface-list=Home