Community discussions

MikroTik App
 
Kevinkp
just joined
Topic Author
Posts: 2
Joined: Thu Feb 02, 2023 10:55 pm

Help regarding industrial Ethernet controller

Thu Feb 02, 2023 11:22 pm

Hello,

I'm having some difficulties in connecting an industrial controller with ethernet and is proper unadjustable software.

Industrial Controller -> connected direct with ethernet cable to PC IP:192.168.1.39 = all is running perfectly

If I plug-in the Industrial controller to the Mikrotik RB2011UIAS I does seem to find the controller with:
IP:192.168.1.55 and MAC 37:80:E1:00:00:00 (strange MAC??)
But the software fails to connect...
If i log the connection via TCPview it seems the software always look for sync at 192.168.1.55 port 6155 for 5-10sec

Anyone can shed some light, as my network knowledge on this level is rather limited.
The MikroTik is operational in AP-Bridge mode, so the simpelest setup.

Big thanks in advance!
 
Kevinkp
just joined
Topic Author
Posts: 2
Joined: Thu Feb 02, 2023 10:55 pm

Re: Help regarding industrial Ethernet controller

Sun Feb 05, 2023 8:30 pm

up :)

Who is online

Users browsing this forum: GoogleOther [Bot] and 56 guests