Community discussions

MikroTik App
 
tamaseppel
just joined
Topic Author
Posts: 2
Joined: Sat Jan 28, 2023 11:55 am

RB5009UG+S+IN not visible in Winbox

Sat Jan 28, 2023 11:58 am

Hello,

I have an RB5009UG+S+IN, which I could connect to once using Winbox. I was trying to connect to it again, and the board is not visible in Winbox. I did reset a couple of times, have my computer on the static address 192.168.88.2. Could anyone please give me a hint of how to debug, resolve the problem?

The computer is connected to port 2.
13: vethd20eaa9@if12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default 
    link/ether 6e:19:48:53:0d:0d brd ff:ff:ff:ff:ff:ff link-netnsid 0
    inet 192.168.88.2/24 brd 192.168.88.255 scope global noprefixroute vethd20eaa9
       valid_lft forever preferred_lft forever
Thanks,
Tamas
 
tamaseppel
just joined
Topic Author
Posts: 2
Joined: Sat Jan 28, 2023 11:55 am

Re: RB5009UG+S+IN not visible in Winbox

Sun Feb 05, 2023 10:17 pm

In the end I was able to reach the machine from one specific Windows computer, and could set up DHCP, after which I could reach it from other machines as well.

Who is online

Users browsing this forum: No registered users and 62 guests