Community discussions

MikroTik App
 
User avatar
lmerega
just joined
Topic Author
Posts: 24
Joined: Tue Feb 14, 2023 12:14 am

HAP AX3: Router off if switch attached to port 1

Fri Feb 17, 2023 9:44 am

Hello everyone, I have a problem with my new HAP AX3.
If I connect a switch or a router to port 1 (2.5 Gbps POE), the Mikrotik shuts down.
There is no way to turn it back on.
As soon as I unplug the cable, it turns back on.
Do you have any idea what it could be?
Should I try a hard reset?
I have also disabled POE, but it doesn't seem to help.
Thank you in advance.

Luca
 
holvoetn
Forum Guru
Forum Guru
Posts: 5403
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: HAP AX3: Router off if switch attached to port 1

Fri Feb 17, 2023 6:19 pm

My first thinking would be a short circuit ... and on a POE port, that's not what you want (not on any port but the consequences might be less)
I could be wrong though. Others might chime in with better suggestions.

Already tried with other cables ?
When you connect a PC to the eth1 port, what happens then ?

Who is online

Users browsing this forum: No registered users and 15 guests