Community discussions

MikroTik App
 
noradtux
newbie
Topic Author
Posts: 39
Joined: Mon May 24, 2021 6:33 pm

RB5009 USB drive oddity (USB2 vs USB3)

Tue Feb 28, 2023 9:40 am

Hi, I have an USB3 drive attached to my RB5009 (on ROS 7.8 ). It works fine and I can use it as usb2-part1 for container storage. But when I reboot the router it comes back up as usb1-part1 (preventing my containers to start). Now if I unplug the drive and replug it becomes usb2-part1 again. It looks like usb1 is for USB2 and usb2 is for USB3. Is this common for the RB5009 or might this just be a shitty USB drive?
 
User avatar
antonsb
MikroTik Support
MikroTik Support
Posts: 385
Joined: Sun Jul 24, 2016 3:12 pm
Location: Riga, Latvia

Re: RB5009 USB drive oddity (USB2 vs USB3)

Tue Feb 28, 2023 12:20 pm

is it possible to get supout.rif files from this case? Please send it to support@mikrotik.com with reference to this thread.
 
noradtux
newbie
Topic Author
Posts: 39
Joined: Mon May 24, 2021 6:33 pm

Re: RB5009 USB drive oddity (USB2 vs USB3)

Tue Feb 28, 2023 4:50 pm

I also just found another report of this, so I don't seem to be the only one experiencing this. supout incoming ...
viewtopic.php?t=192427&start=300#p982228
 
noradtux
newbie
Topic Author
Posts: 39
Joined: Mon May 24, 2021 6:33 pm

Re: RB5009 USB drive oddity (USB2 vs USB3)

Wed Mar 01, 2023 10:13 am

Support says this issue is known and being worked on.
 
jookraw
Member Candidate
Member Candidate
Posts: 141
Joined: Mon Aug 19, 2019 3:06 pm

Re: RB5009 USB drive oddity (USB2 vs USB3)

Wed Mar 01, 2023 12:16 pm

I had one SSD used as container storage with the label "ssd", but after upgrading to 7.8, it got renamed to usb1-part1 and it broke my containers. not sure if is the same issue as here in this topic
 
noradtux
newbie
Topic Author
Posts: 39
Joined: Mon May 24, 2021 6:33 pm

Re: RB5009 USB drive oddity (USB2 vs USB3)

Wed Mar 01, 2023 5:47 pm

I had one SSD used as container storage with the label "ssd", but after upgrading to 7.8, it got renamed to usb1-part1 and it broke my containers. not sure if is the same issue as here in this topic
Does it change its name if you replug it?

I just tried this with an UAS capable SSD-adapter. That one stays on usb2-part1 even after reboot. As I would expect :)

Who is online

Users browsing this forum: No registered users and 17 guests