Community discussions

MikroTik App
 
psmit1957
just joined
Topic Author
Posts: 2
Joined: Thu Mar 02, 2023 11:11 am

interface list in /interface/bridge/vlan

Thu Mar 09, 2023 6:12 pm

I do have a large (64) nummer of Vlans that each must be available on all ports of a CRS328, I made an interface list (Ether_interfaces) containing all ports of that switch.
Whe I try to setup a command like "/interface/bridge/vlan add bridge-Bridge vlan-ids=10 tagged=Ether_interfaces" is doesn't work.

There is also no autocompletion by the tab-key available.
The interface list work fine on other commands.
Is it not implemented or did I stumble on a bug?
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 19107
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: interface list in /interface/bridge/vlan

Sun Mar 12, 2023 1:38 pm

Where does it indicate this is possible?
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11439
Joined: Thu Mar 03, 2016 10:23 pm

Re: interface list in /interface/bridge/vlan

Sun Mar 12, 2023 3:41 pm

Interface lists work where property is called <something>interface-list but not if property is called simply <something>interface or something which implies enumerating interfaces (like in your case with tagged). IIRC interface lists are only widely used in firewall (which is L3 function) ... you're trying to use it in L2 configuration section.

Who is online

Users browsing this forum: Bing [Bot], cmmike, Google [Bot], massinia and 32 guests