I have some strange issue or this is not an issue.
Im running my new CRS310 router switch and im facing a big CPU usage during internet test to fast.com
Could anyone tell me if my configuration is wrong or this works as expected?
Code: Select all
# model = CRS310-1G-5S-4S+
/interface bridge
add admin-mac=19:FD:74:9C:78:FF auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=sfp-sfpplus1 ] advertise=\
10M-half,10M-full,100M-half,100M-full,1000M-half,1000M-full,10000M-full
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip hotspot profile
set [ find default=yes ] html-directory=hotspot
/ip pool
add name=dhcp_pool0 ranges=192.168.10.2-192.168.10.100
/ip dhcp-server
add address-pool=dhcp_pool1 interface=ether1 lease-time=1d10m name=dhcp1
/port
set 0 name=serial0
/interface bridge port
add bridge=bridge comment=defconf disabled=yes interface=ether1
add bridge=bridge comment=defconf interface=sfp-sfpplus1
add bridge=bridge comment=defconf interface=sfp-sfpplus2
add bridge=bridge comment=defconf interface=sfp-sfpplus3
add bridge=bridge comment=defconf disabled=yes interface=sfp-sfpplus4
add bridge=bridge comment=defconf interface=sfp1
add bridge=bridge comment=defconf interface=sfp2
add bridge=bridge comment=defconf interface=sfp3
add bridge=bridge comment=defconf interface=sfp4
add bridge=bridge comment=defconf interface=sfp5
/ip address
add address=192.168.10.1/24 interface=bridge network=192.168.10.0
/ip dhcp-client
add interface=ether1
/ip dhcp-server network
add address=192.168.10.0/24 gateway=192.168.10.1
/ip firewall filter
add action=fasttrack-connection chain=forward hw-offload=yes
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1
/system clock
set time-zone-name=Europe/Warsaw
/system routerboard settings
set boot-os=router-os
I know that 600Mbit/s is a lot and its "just 70%" oc CPU, but i thougt that without firewall, and hw-offload running CPU should be less consumed.
Am I missing something in my config?