struggling with proper VLAN set up. Basic home set-up. Eth2-4 will be for PCs and TV (which I'll later add to separate VLAN) and 2x wifi.
Currently trying to set up wifi on VLAN 20 for guests. I can connect to wifi, proper IP, also torch shows some lines with Vlan Id 20, but unfortunately no internet access.
Any help is appreciated.
Thank you.
Code: Select all
# feb/07/2023 22:19:25 by RouterOS 7.5
# software id = 8WTH-A6G4
#
# model = C53UiG+5HPaxD2HPaxD
# serial number =
/interface bridge
add admin-mac=ZZZZZZZZZ auto-mac=no comment=defconf name=bridge \
vlan-filtering=yes
/interface ethernet
set [ find default-name=ether1 ] comment=Internet name=ether1_wan
set [ find default-name=ether2 ] comment=PC name=ether2_PC
set [ find default-name=ether3 ] comment=Other
set [ find default-name=ether4 ] comment=Other
set [ find default-name=ether5 ] comment=SonyTV name=ether5_SonyTV
/interface vlan
add interface=bridge name=interface_vlan20 vlan-id=20
/interface list
add name=WAN
add name=LAN
add name=VLAN
/interface wifiwave2 security
add authentication-types=wpa2-psk name=AThome
/interface wifiwave2
set [ find default-name=wifi2 ] channel.band=2ghz-ax .skip-dfs-channels=\
10min-cac configuration.country=USA .mode=ap .ssid="Ahsoka Tano 2" \
disabled=no name="Ahsoka Tano 2" security=AThome \
security.authentication-types=wpa2-psk
set [ find default-name=wifi1 ] channel.band=5ghz-ax .skip-dfs-channels=\
10min-cac configuration.country=USA .mode=ap .ssid="Ahsoka Tano 5" \
disabled=no name="Ahsoka Tano 5" security=AThome \
security.authentication-types=wpa2-psk
add channel.band=5ghz-ax configuration.country=USA .mode=ap .ssid=\
"Ahsoka Tano 6" disabled=no mac-address=ZZZZZZ \
master-interface="Ahsoka Tano 5" name="Ahsoka Tano 6" \
security.authentication-types=wpa2-psk,wpa3-psk
/ip pool
add name=dhcp ranges=192.168.88.10-192.168.88.254
add name=dhcp_pool1 ranges=20.10.10.2-20.10.10.254
add name=dhcp_pool2 ranges=30.10.10.2-30.10.10.254
/ip dhcp-server
add address-pool=dhcp interface=bridge name=defconf
add address-pool=dhcp_pool1 interface=interface_vlan20 name=dhcp_vlan20
/port
set 0 name=serial0
/interface bridge port
add bridge=bridge comment=defconf interface=ether2_PC
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5_SonyTV
add bridge=bridge comment=defconf interface="Ahsoka Tano 5"
add bridge=bridge comment=defconf interface="Ahsoka Tano 2"
add bridge=bridge interface="Ahsoka Tano 6" pvid=20
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface bridge vlan
add bridge=bridge tagged="Ahsoka Tano 6,bridge" vlan-ids=20
/interface list member
add interface=bridge list=LAN
add interface=ether1_wan list=WAN
add interface=interface_vlan20 list=VLAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
add address=20.10.10.1/24 interface=interface_vlan20 network=20.10.10.0
/ip dhcp-client
add comment=defconf interface=ether1_wan
/ip dhcp-server network
add address=20.10.10.0/24 gateway=20.10.10.1
add address=192.168.88.0/24 comment=defconf dns-server=192.168.88.1 gateway=\
192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related hw-offload=yes
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=\
33434-33534 protocol=udp
add action=accept chain=input comment=\
"defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\
udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \
protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=input comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=\
!LAN
add action=accept chain=forward comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop packets with bad src ipv6" src-address-list=bad_ipv6
add action=drop chain=forward comment=\
"defconf: drop packets with bad dst ipv6" dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \
hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=\
500,4500 protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=forward comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=\
!LAN
/system clock
set time-zone-name=USA
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN