Community discussions

MikroTik App
 
oguruma
Frequent Visitor
Frequent Visitor
Topic Author
Posts: 83
Joined: Sat Jun 04, 2022 8:55 pm

WiFI VlAN Tag with upstream switch

Sun Mar 19, 2023 11:02 pm

I have a few Mikrotik cAP/wAPs connected to a Cisco Catalyst managed switch, which is connected to a PfSense router.

What I want to do is create a VLAN for my IOT devices, which will be blocked from going out the WAN on the router (I don't trust cheap Chinese electronics).

I've found enough write-ups to figure out the Mikrotik WiFi configuration part, and I've created a IOT-no-internet interface on the router, but what do I need to do configure the Cisco switch in the middle?

I have 192.168.0.1/16 as the LAN, 10.1.1.1/24 as a DMZ, and 10.4.1.1/24 as the IOT-no-internet.

The switch, as it is now, just has all of the interfaces bridged in the single "default" VLAN.
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 19100
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: WiFI VlAN Tag with upstream switch

Mon Mar 20, 2023 1:43 am

You need to do this on the pfsense router and cisco switch so wrong forum.
 
User avatar
mkx
Forum Guru
Forum Guru
Posts: 11433
Joined: Thu Mar 03, 2016 10:23 pm

Re: WiFI VlAN Tag with upstream switch

Mon Mar 20, 2023 10:48 am

You need to do this on the pfsense router and cisco switch so wrong forum.
@anav, I thought you'd come up with correct answer on this one ... which is: replace Cisco with a CRS3xx switch :wink:
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 19100
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: WiFI VlAN Tag with upstream switch

Mon Mar 20, 2023 12:46 pm

I'm not paid enough for such novel thinking, however if MT added a zerotrust cloudflare options package for all MT devices, I would probably be inspired to recommend MT switches. ;-)

Who is online

Users browsing this forum: Bing [Bot], edielson_atm, syslog and 105 guests