1) I use "bcast-relay" to route broadcast packets on specific ports across VLANs. The reason for this is that I have devices that can only be discovered by their apps via broadcast packets, but those devices are on a separate VLAN with no internet access. Example:
Code: Select all
service {
bcast-relay {
id 1 {
interface switch0.300
interface switch0.100
port 30050
}
}
}
2) I use a static ARP to re-transmit wake-on-LAN packets across VLANs for similar reasons:
Code: Select all
protocols {
static {
arp 192.168.3.13 {
hwaddr ff:ff:ff:ff:ff:ff
}
}
}
Can I do both of these things on a Mikrotik RB5009UG+S+IN? Thanks for any help.