Community discussions

MikroTik App
 
jek93
just joined
Topic Author
Posts: 1
Joined: Fri Mar 24, 2023 7:19 pm

CCR1016-12S-1S+ could not format partitions

Fri Mar 24, 2023 8:24 pm

Hello, I have been looking for a solution for Mikrotik CCR1016-12S-1S+ for several hours now. The device did not boot, ETHER BOOT writes on the screen. I found a cable and connected through the hyper terminal. I read a lot of forums, but either did not write answers as they decided, or simply did not decide. here is the log, I flashed the latest bootloader 7.8 tilegx, tried different versions through netinstall. Is there anything else to try?
RouterBOOT booter 7.8

CCR1016-12S-1S+

CPU frequency: 1200 MHz
  Memory size: 2048 MiB
    NAND size: 2048 MiB

Press Ctrl+E to enter etherboot mode
Press <delete> key within 2 seconds to enter setup.
trying bootp protocol... OK
Got IP address: 192.168.88.1
resolved mac address 2C:FD:A1:BC:4B:57
transfer started ................................. transfer ok, time=0.66s
setting up elf image... OK
jumping to kernel code
ERROR: ROSMode access failed

Welcome to MikroTik Router Software remote installation 7.8
Press Ctrl-Alt-Delete to abort

mac-address: 4C:5E:0C:16:34:22
mac-address: 4C:5E:0C:16:34:22
mac-address: 4C:5E:0C:16:34:23
mac-address: 4C:5E:0C:16:34:23
mac-address: 4C:5E:0C:16:34:24
mac-address: 4C:5E:0C:16:34:24
mac-address: 4C:5E:0C:16:34:25
mac-address: 4C:5E:0C:16:34:25
mac-address: 4C:5E:0C:16:34:26
mac-address: 4C:5E:0C:16:34:26
mac-address: 4C:5E:0C:16:34:27
mac-address: 4C:5E:0C:16:34:27
mac-address: 4C:5E:0C:16:34:28
mac-address: 4C:5E:0C:16:34:28
mac-address: 4C:5E:0C:16:34:29
mac-address: 4C:5E:0C:16:34:29
mac-address: 4C:5E:0C:16:34:2A
mac-address: 4C:5E:0C:16:34:2A
mac-address: 4C:5E:0C:16:34:2B
mac-address: 4C:5E:0C:16:34:2B
mac-address: 4C:5E:0C:16:34:2C
mac-address: 4C:5E:0C:16:34:2C
mac-address: 4C:5E:0C:16:34:2D
mac-address: 4C:5E:0C:16:34:2D
mac-address: 4C:5E:0C:16:34:2E
mac-address: 4C:5E:0C:16:34:2E

software-id: 7RT2-ICAU key:
azQKsHAhBfJxSWSc7KggeJN1/8FkiVcpn1wkS+4uOCX3fXOn0eXFHuSLhGkUq9iPvFfOl+3h/t3dhcXh
6i4NDA==

Waiting for installation server...
Found server at 2C:FD:A1:BC:4B:57

WARNING: couldn't keep config - current license does not allow that
Formatting disk...
ERROR: could not format partitions
Press ENTER to reboot

Who is online

Users browsing this forum: rplant and 19 guests