Tried ROSE-NFS -> nada. No connection possible (even tried a Linux box, not possible)
With macOS I can mount but it's in read only mode.
Tried ROSE-SMB -> nada (same with Linux box).
Same thing for me too... error: wrong username and password
Tried IP/SMB -> connection using Win11 but slow as hell writing, a bit faster when reading (makes sense). But still not fast at all (around 63MB/s).
For me it's fast 100 MB/s read and 70/80 MB/s write, I formatted the hdd in ext4.
Don't use pendrives they are much slower.
The problem is that macOS is damn slow with IP>SMB !
user@MacBook-Pro ~ % smbutil statshares -a
==================================================================================================
SHARE ATTRIBUTE TYPE VALUE
==================================================================================================
Router
SERVER_NAME 192.168.10.1
USER_ID 501
SMB_NEGOTIATE SMBV_NEG_SMB1_ENABLED
SMB_NEGOTIATE SMBV_NEG_SMB2_ENABLED
SMB_NEGOTIATE SMBV_NEG_SMB3_ENABLED
SMB_VERSION SMB_2.002
SMB_ENCRYPT_ALGORITHMS AES_128_CCM_ENABLED
SMB_ENCRYPT_ALGORITHMS AES_128_GCM_ENABLED
SMB_ENCRYPT_ALGORITHMS AES_256_CCM_ENABLED
SMB_ENCRYPT_ALGORITHMS AES_256_GCM_ENABLED
SMB_CURR_ENCRYPT_ALGORITHM OFF
SMB_SHARE_TYPE DISK
SIGNING_SUPPORTED TRUE
EXTENDED_SECURITY_SUPPORTED TRUE
LARGE_FILE_SUPPORTED TRUE
FILE_IDS_SUPPORTED TRUE
--------------------------------------------------------------------------------------------------