Hello,
I have a small problem and I'm unable to solve it on my own.
I have 3 Mikrotik devices and I want to configure them in the following way using wireguard (right now I'm using GRE tunnel and it works just fine):
MT #1 should send all it's traffic to MT #2 (to change IP address of devices connected to MT #1). At the same time MT #1 should also be connected to MT #3 in order to access it's LAN (for remote workers to access machines via RDP). MT#2 and MT#3 are not directly connect to each other.
As of now I created Wireguard interfaces and peers. Connecting MT#1 to MT#3 in order to access machines via RDP is not a problem at all. But when I'm trying to connect MT #1 to MT#2 in order to change IP addresses of connected devices everything goes south. I didn't even manage to make MT #1 to MT #3 work (without connecting to MT #2).
If anyone could help me resolve this problem I'll be very grateful.
I'm new to this forum and this is my first post. If there is anything I missed or wrote wrong, please forgive me. I'll be happy to provide any information.
Thank you again!