I will be very happy if anyone can look at my config. Im trying to get it work from many days, but Im out of idea.
Im trying to setup PCC for 2 WAN connections in my home Router. I followed every each example that i found according to ROS 7.
Im running my router on rb750g3 with newest 7.8 OS version
I did all I could, but my internet connection with PCC doesn't work with this config:
Code: Select all
/interface list
add name=WAN
add name=LAN
/routing table
add disabled=no fib name=to_WAN1
add disabled=no fib name=to_WAN2
/ipv6 settings
set disable-ipv6=yes
/interface list member
add interface=ether1 list=WAN
add interface=ether3 list=WAN
add interface=ether2 list=LAN
add interface=ether4 list=LAN
/ip address
add address=10.0.10.1/30 interface=WAN_Pab_to_GAB network=10.0.10.0
add address=192.168.11.1/24 interface=LAN_10_pab network=192.168.11.0
add address=10.0.5.2/30 interface=ether3 network=10.0.5.0
add address=192.168.88.11/24 interface=MGMTVlan88 network=192.168.88.0
add address=192.168.3.3/29 interface=ether1 network=192.168.3.0
add address=192.168.20.1/25 interface=LAN_20_Pab network=192.168.20.0
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4
/ip firewall filter
add action=fasttrack-connection chain=forward hw-offload=yes
add action=accept chain=forward connection-state=established,related disabled=yes
/ip firewall mangle
add action=accept chain=prerouting dst-address=192.168.3.0/29 in-interface-list=LAN
add action=accept chain=prerouting dst-address=10.0.5.0/30 in-interface-list=LAN
add action=mark-connection chain=prerouting connection-mark=no-mark in-interface=ether1 new-connection-mark=WAN1_con_mark
add action=mark-connection chain=prerouting connection-mark=no-mark in-interface=ether3 new-connection-mark=WAN2_con_mark
add action=mark-connection chain=prerouting connection-mark=no-mark dst-address-type=!local in-interface-list=LAN new-connection-mark=WAN1_con_mark per-connection-classifier=both-addresses:2/0
add action=mark-connection chain=prerouting connection-mark=no-mark dst-address-type=!local in-interface-list=LAN new-connection-mark=WAN2_con_mark per-connection-classifier=both-addresses:2/1
add action=mark-routing chain=prerouting connection-mark=WAN1_con_mark in-interface-list=LAN new-routing-mark=to_WAN1
add action=mark-routing chain=prerouting connection-mark=WAN2_con_mark in-interface-list=LAN new-routing-mark=to_WAN2
add action=mark-routing chain=output connection-mark=WAN1_con_mark new-routing-mark=to_WAN1
add action=mark-routing chain=output connection-mark=WAN2_con_mark new-routing-mark=to_WAN2
/ip firewall nat
add action=masquerade chain=srcnat out-interface-list=WAN src-address=192.168.11.0/24
/ip route
add comment="for working internet" disabled=yes distance=1 dst-address=0.0.0.0/0 gateway=192.168.3.1 pref-src="" routing-table=main scope=30 suppress-hw-offload=no target-scope=10
add check-gateway=ping gateway=10.0.5.1 routing-table=to_WAN2
add check-gateway=ping gateway=192.168.3.1 routing-table=to_WAN1