So, cannot install S-RJ10 in no one of MT with passive cooler.
I search for heatsink but as i see it is apply in main surface (not this in outside):
https://www.electronics-cooling.com/201 ... ns-part-1/
The dimensions of these heatsink they don't fit in any MT with passive cooler.
Is the only solutions the MT with active coolers?
Are there other lower temperature sfp to rj45 modules that could be fitted?
all 10G Base T modules have a high power consumption is a inherent problem of that technology at least for now
if you want no heat you have to use 1G Base T module
I want to emphasize that rb4011 wifi version is a hotter device than the only wired version, that is another factor worsening the situation
for example, rb4011 only wired suports ambient up to 70°C, rb4011 wifi version only up to 45°C
even on bigger devices the use of 10 G Base T module requires special measures
https://wiki.mikrotik.com/wiki/S%2BRJ10 ... l_guidance