I haven't yet because the raw output is over 3KB now that I loaded a few unwanted DNS addresses to block and there are other things I was testing, but here's a condensed version:
# apr/22/2023 20:51:49 by RouterOS 6.49.6
# software id = XXXX-XXXX
#
# model = RB3011UiAS
# serial number = XXXXXXXXXXXX
/interface bridge
add admin-mac=C4:AD:34:D5:BA:3B auto-mac=no comment=defconf dhcp-snooping=yes \
igmp-snooping=yes name=bridge
/interface ethernet
set [ find default-name=ether3 ] advertise=\
100M-half,100M-full,1000M-half,1000M-full rx-flow-control=auto \
tx-flow-control=auto
set [ find default-name=ether7 ] comment=AP
set [ find default-name=ether9 ] comment=EXT
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp ranges=192.168.0.100-192.168.0.254
/ip dhcp-server
add address-pool=dhcp bootp-support=dynamic disabled=no interface=bridge \
name=defconf
/queue simple
add disabled=yes max-limit=1G/1G name=ALL target=192.168.0.0/25
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,pas\
sword,web,sniff,sensitive,api,romon,dude,tikapp"
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=ether6
add bridge=bridge comment=defconf interface=ether7
add bridge=bridge comment=defconf interface=ether8
add bridge=bridge comment=defconf interface=ether9
add bridge=bridge comment=defconf interface=ether10
add bridge=bridge comment=defconf interface=sfp1
/interface bridge settings
set use-ip-firewall=yes use-ip-firewall-for-vlan=yes
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface detect-internet
set detect-interface-list=all
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
add comment=wanagg interface=ether2 list=WAN
/ip address
add address=192.168.0.1/24 comment=defconf interface=ether2 network=\
192.168.0.0
add address=143.X.X.X/24 comment=" " interface=ether1 network=143.x.x.x
/ip arp
add address=192.168.0.109 comment="AP/ROUTER EXT" interface=bridge \
mac-address=14:EB:XX:XX:XX:XX
add address=192.168.0.100 interface=bridge mac-address=C4:AD:XX:XX:XX:XX
/ip dhcp-client
add comment=defconf interface=ether1
/ip dhcp-server lease
add address=192.168.0.104 client-id=1:b0:95:XX:XX:XX:XX comment=EAP245 \
mac-address=B0:95:XX:XX:XX:XX server=defconf
add address=192.168.0.101 client-id=1:54:3a:XX:XX:XX:XX mac-address=\
54:3A:XX:XX:XX:XX server=defconf
add address=192.168.0.110 client-id=1:84:1b:XX:XX:XX:XX comment="" \
mac-address=84:1B:XX:XX:XX:XX server=defconf
add address=192.168.0.121 client-id=1:74:d4:XX:XX:XX:XX mac-address=\
74:D4:XX:XX:XX:XX server=defconf
add address=192.168.0.115 client-id=1:8:11:XX:XX:XX:XX mac-address=\
08:11:XX:XX:XX:XX server=defconf
/ip dhcp-server network
add address=192.168.0.0/24 dns-server=192.168.0.1 gateway=192.168.0.1 \
netmask=24
add address=192.168.88.0/24 comment=defconf dns-server=192.168.0.1 gateway=\
192.168.88.1 netmask=24
/ip dns
set allow-remote-requests=yes cache-max-ttl=1d cache-size=500000KiB \
max-concurrent-queries=2000 max-concurrent-tcp-sessions=200 \
query-server-timeout=3s servers=8.8.8.8,192.168.0.1
/ip dns static
add address=192.168.0.1 comment=defconf name=router.lan
add address=240.0.0.1 name=0.0.0.0
/ip firewall filter
add action=reject chain=forward dst-address=240.0.0.1 protocol=udp \
reject-with=icmp-network-unreachable
add action=reject chain=forward dst-address=240.0.0.1 log=yes log-prefix=\
ADBLOCK protocol=tcp reject-with=tcp-reset
add action=drop chain=forward comment=adblock dst-address=240.0.0.1
add action=reject chain=forward disabled=yes dst-port=80,443 layer7-protocol=\
Pinterest port="" protocol=tcp reject-with=tcp-reset
add action=reject chain=forward disabled=yes dst-port=80,443 layer7-protocol=\
Facebook protocol=tcp reject-with=tcp-reset
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" disabled=yes \
dst-address=127.0.0.1
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
disabled=yes ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
disabled=yes ipsec-policy=out,ipsec
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
/ip firewall nat
add action=redirect chain=dstnat comment="dns redirect (udp)" dst-address=\
!192.168.0.1 dst-port=53 in-interface=all-ethernet protocol=udp to-ports=\
53
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment=WebServer dst-address=143.X.X.X \
dst-port=81 protocol=tcp to-addresses=192.168.0.119 to-ports=81
add action=dst-nat chain=dstnat dst-address=143.X.X.X dst-port=10554 \
protocol=tcp to-addresses=192.168.0.119 to-ports=10554
add action=dst-nat chain=dstnat dst-address=143.X.X.X dst-port=10080 \
protocol=tcp to-addresses=192.168.0.119 to-ports=10080
add action=masquerade chain=srcnat connection-limit=100,32 disabled=yes \
dst-address=143.X.X.X dst-port=81 protocol=tcp src-address=\
192.168.0.1-192.168.0.255
add action=dst-nat chain=dstnat dst-address=143.X.X.X dst-port=443 \
protocol=tcp src-port="" to-addresses=192.168.0.0/24 to-ports=0
add action=dst-nat chain=dstnat dst-address=143.X.X.X dst-port=1935 \
protocol=tcp src-port="" to-addresses=192.168.0.1-192.168.0.255 to-ports=\
1935
add action=dst-nat chain=dstnat dst-address=143.X.X.X dst-port=14567 port=\
"" protocol=udp src-port="" to-addresses=192.168.0.114 to-ports=14567
add action=dst-nat chain=dstnat dst-address=143.X.X.X dst-port=14690 \
protocol=udp to-addresses=192.168.0.114 to-ports=14690
add action=dst-nat chain=dstnat dst-address=143.X.X.X dst-port=23000-23009 \
protocol=udp to-addresses=192.168.0.121 to-ports=23000-23009
/ip proxy
set always-from-cache=yes anonymous=yes cache-on-disk=yes cache-path=\
disk1/proxy max-cache-object-size=409600KiB max-fresh-time=2d
/ip proxy access
add action=deny disabled=yes dst-host=facebook.com
/ip route
add distance=1 gateway=143.X.X.X
add distance=1 dst-address=143.X.X.X/32 gateway=143.X.X.X
/ip service
set telnet disabled=yes
set ftp disabled=yes
set www port=27787
set ssh disabled=yes
set api disabled=yes
set api-ssl disabled=yes
/ip smb
set allow-guests=no domain=WORKGROUP enabled=yes
/ip smb shares
add directory=disk1/ name=usb
/ip upnp
set enabled=yes
/lcd
set backlight-timeout=50m default-screen=stats
/snmp
set enabled=yes
/system clock
set time-zone-name=XXXXXXX
/system note
set note="smb\r\
\nweb proxy"
/system ntp client
set enabled=yes primary-ntp=118.67.201.10 secondary-ntp=31.193.144.2
/system script
add dont-require-permissions=no name=script1 owner=admin policy=\
ftp,read,write,policy,test,password,sniff,sensitive,romon source="add chai\
n=input protocol=tcp dst-port=21 src-address-list=ftp_blacklist action=dro\
p \\\r\
\ncomment=\"drop ftp brute forcers\"\r\
\n\r\
\nadd chain=output action=accept protocol=tcp content=\"530 Login incorrec\
t\" dst-limit=1/1m,9,dst-address/1m\r\
\n\r\
\nadd chain=output action=add-dst-to-address-list protocol=tcp content=\"5\
30 Login incorrect\" \\\r\
\naddress-list=ftp_blacklist address-list-timeout=3h"
/tool bandwidth-server
set enabled=no
/tool graphing interface
add
/tool graphing resource
add
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
/tool netwatch
add down-script=":for i from=0 to=15 step=5 do={ :beep frequency=1000 length=8\
0ms; :delay 600ms; }" host=192.168.0.109 interval=30s timeout=2s \
up-script=":beep frequency=2000 length=100ms; :delay 100ms;:beep frequency\
=1000 length=100ms; :delay 250ms;"
I cleaned it up to remove unneeded data.