since I can't reply in the 7.9 announcement thread, I need to create a new one.
So basically, when selecting a DFS channel on the 5 GHz interface, the interface itself is instantly switching to a "running" state without the red "DFS 10 min scan" info in the WiFi Wave2 panel and the terminal
Code: Select all
/interface/wifiwave2> monitor 1
state: running
channel: 5640/ax/eeeC
registered-peers: 0
authorized-peers: 0
tx-power: 24
available-channels: 5500/ax/Ceee,5520/ax/eCee,5540/ax/eeCe,5560/ax/eeeC,
5580/ax/Ceee,5600/ax/eCee,5620/ax/eeCe,5640/ax/eeeC,
5500/ac/Ceee,5520/ac/eCee,5540/ac/eeCe,5560/ac/eeeC,
5580/ac/Ceee,5600/ac/eCee,5620/ac/eeCe,5640/ac/eeeC
I discovered this almost instantly after updating to 7.9.