Community discussions

MikroTik App
 
User avatar
cyrq
just joined
Topic Author
Posts: 6
Joined: Sat Mar 11, 2023 12:19 pm

hAp ax^3 - v7.9 - Radar detection info missing from WinBox and CLI

Tue May 02, 2023 7:39 pm

Hello,
since I can't reply in the 7.9 announcement thread, I need to create a new one.
So basically, when selecting a DFS channel on the 5 GHz interface, the interface itself is instantly switching to a "running" state without the red "DFS 10 min scan" info in the WiFi Wave2 panel and the terminal
/interface/wifiwave2> monitor 1
               state: running
             channel: 5640/ax/eeeC
    registered-peers: 0
    authorized-peers: 0
            tx-power: 24
  available-channels: 5500/ax/Ceee,5520/ax/eCee,5540/ax/eeCe,5560/ax/eeeC,
                      5580/ax/Ceee,5600/ax/eCee,5620/ax/eeCe,5640/ax/eeeC,
                      5500/ac/Ceee,5520/ac/eCee,5540/ac/eeCe,5560/ac/eeeC,
                      5580/ac/Ceee,5600/ac/eCee,5620/ac/eeCe,5640/ac/eeeC
This if course just a visual bug, Since the interface isn't actually running and in the example above, it's only active when the 10min radar detection is complete.
I discovered this almost instantly after updating to 7.9.

Who is online

Users browsing this forum: ips, petardo and 24 guests