Screenshot_9.jpg
lte1 functioning perfectly when i disconnect pppoe-out1. 192.168.88.251 my pc ip.
Here's the specific steps and settings that i did route only specific devices to lte1
Screenshot_7.jpg
Screenshot_8.jpg
Method 1 :
Step 1 : Create new Route table Enable "FIB"
Screenshot_5.jpg
Step 2 : Create new route for lte1
IP --> Routes --> Add New
Dst. Address: 0.0.0.0/0
Gateway: lte1
Routing Table: Select the table created in Step 1
Screenshot_1.jpg
Step 3 : Create route rule(s) for devices or specific traffic to use lte1
IP --> Routes --> Rules --> Add New
For device routing specifiy device IP in Src. Address
Action: lookup only in table
Table: Select the table created in Step 1
Screenshot_2.jpg
It not working .So i try second method.The same way i successful with my VPN.
---------------------------------------------------------------------------------------------------------------------------------------
Method 2 :
Step 1 : Create Address List
Screenshot_3.jpg
Step 2 : Create Mangle
Screenshot_4.jpg
Screenshot_6.jpg
It not working again. I can't access ipaddress.my to get lte1 IP. (My VPN work fine when i use this method)
You do not have the required permissions to view the files attached to this post.