Community discussions

  • 1
  • 3
  • 4
  • 5
  • 6
  • 7
  • 11
 
lambert
Long time Member
Long time Member
Posts: 520
Joined: Fri Jul 23, 2010 1:09 am

Re: HAP AC

Tue Feb 09, 2016 11:01 pm

SORRY ... quick shot...
just saw it in the table!!!
Wireless standards 802.11a/n/ac
all good ;)
the website says...
The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.
so ... ment are ... 5GHz a/n/ac ... or am i mistaking something here....?
because on my GrooveA 52 i also have 5GHz a/n but no ac.....
That sentence says, a) this is an 802.11ac device and b) it is backward compatible with b/g/n and a/n devices.

If that's not what you were asking, I apologize.
 
User avatar
DmitryAVET
Frequent Visitor
Frequent Visitor
Posts: 86
Joined: Thu Mar 26, 2015 12:27 am
Location: Ukraine, Mukachevo
Contact:

Re: HAP AC

Wed Feb 10, 2016 1:49 am

- hAP ac use QCA9558
- hEX use QCA9556

hEX is more faster, why? And only 16 Mb flash is joke?
 
brwainer
newbie
Posts: 47
Joined: Tue Feb 02, 2016 2:55 am

Re: HAP AC

Wed Feb 10, 2016 2:57 am


I got this information from Baltic Networks in Chicago - http://www.balticnetworks.com. I contacted them via e-mail.

Edit:
I've got new information from them:
We just received these, the order can be placed through our website and you can choose will call – pickup as the option so your order is ready when you arrive.
Unfortunately I wasn't able to locate the product on their website.
Agreed I can't find it on their website either - please post here as soon as you are able to get an order placed somewhere in the US!
 
ronniee
Member Candidate
Member Candidate
Posts: 116
Joined: Sun Jan 15, 2006 9:32 pm

Re: HAP AC

Wed Feb 10, 2016 8:21 am

In the block diagram of hAP http://i.mt.lv/routerboard/files/RB962U ... 165822.png
I’m disappointed with Eth1-Eth5 gigabit switch chip - cpu 1Gb connection.
And the SFP has separately 1Gb cpu connection.

I think at home, few have SFP connection possibility, and 90% will use with utp cable(Ether1) as uplink WAN port.
In this case all traffic(WAN+LAN) will use the 1Gb link with CPU, so max traffic can be 500+500 theoretically.

Why the SFP+Eth1 not have a dedicated 1Gb connection with CPU?
Something like in RB850Gx2 block diagram http://i.mt.lv/routerboard/files/RB850G ... 133216.png
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 5696
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: HAP AC

Wed Feb 10, 2016 10:15 am

You can always use
Image
 
VK2XXY
just joined
Posts: 16
Joined: Mon Jun 15, 2015 5:01 am

Re: HAP AC

Wed Feb 10, 2016 12:57 pm

 
kobuki
Member Candidate
Member Candidate
Posts: 123
Joined: Sat Apr 02, 2011 5:59 pm

Re: HAP AC

Wed Feb 10, 2016 2:25 pm

I'm glad it appeared finally. I have the AC Lite and it's fine so far, I'll probably replace an older TP-Link dualband as soon as I can get hold of a HAP AC, for testing.
Last edited by kobuki on Fri Feb 12, 2016 9:30 pm, edited 1 time in total.
 
ronniee
Member Candidate
Member Candidate
Posts: 116
Joined: Sun Jan 15, 2006 9:32 pm

Re: HAP AC

Wed Feb 10, 2016 3:06 pm

You can always use
RJ45 SFP 10/100/1000M copper module
Yes, it is an option, but increase the price with ~20%.
Will be interesting a comparative test between Ether1=WAN and SFP/RJ45=WAN routing performance.
Maybe it increase the speed more than 30-40%, if the CPU can handle.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1688
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: HAP AC

Wed Feb 10, 2016 3:51 pm

RB962UiGS-5HacT2HnT

What! That name is like a joke :) Almost as good as random generated passwords.
.
Just in case someone is not aware of this -

http://wiki.mikrotik.com/wiki/Manual:Product_Naming

RB962UiGS-5HacT2HnT

RouterBoard lineup, 900 Series with 6 wired interfaces and 2 wireless interfaces, with USB, power Injector, Gigabit Ethernets and SFP port, combined with 5GHz, High Gain, 802.11ac, Triple chain wireless and and 2.4GHz, High Gain, 802.11n, Triple chain wireless.
Last edited by macgaiver on Thu Feb 11, 2016 6:56 am, edited 1 time in total.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
ste
Forum Guru
Forum Guru
Posts: 1702
Joined: Sun Feb 13, 2005 11:21 pm

Re: HAP AC

Wed Feb 10, 2016 3:51 pm

In the block diagram of hAP http://i.mt.lv/routerboard/files/RB962U ... 165822.png
I’m disappointed with Eth1-Eth5 gigabit switch chip - cpu 1Gb connection.
And the SFP has separately 1Gb cpu connection.

I think at home, few have SFP connection possibility, and 90% will use with utp cable(Ether1) as uplink WAN port.
In this case all traffic(WAN+LAN) will use the 1Gb link with CPU, so max traffic can be 500+500 theoretically.

Why the SFP+Eth1 not have a dedicated 1Gb connection with CPU?
Something like in RB850Gx2 block diagram http://i.mt.lv/routerboard/files/RB850G ... 133216.png
You'll most likely need a fiber connection to get speeds beyond 500M to your home. So a SFP is what is needed anyhow.
Switched traffic within your home can go 1GBit/s through the builtin switch without bogging the cpu. So where is the
application?
 
cpliu903
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Wed Apr 01, 2015 10:20 am

Re: HAP AC

Thu Feb 11, 2016 6:42 am

http://routerboard.com/RB962UiGS-5HacT2HnT

$129 USD. Too expensive!

In this price range, we have so many choice for other brand model such as Asus, Netgear.
 
kiler129
Member Candidate
Member Candidate
Posts: 195
Joined: Tue Mar 31, 2015 4:32 pm
Contact:

Re: HAP AC

Thu Feb 11, 2016 7:20 am

Agreed I can't find it on their website either - please post here as soon as you are able to get an order placed somewhere in the US!
Unfortunately my happiness was premature since they replied that given e-mail was mistake because they marked it for RB3011 availability. So, we have to wait these 3 weeks.
we have so many choice for other brand model such as Asus, Netgear.
You gotta be kidding, right? Comparing ROS to stock firmware of SOHO routers or even DD-WRT is like comparing bicycle to motorcycle - both rides, both ends with "cycle" but...
 
cpliu903
Frequent Visitor
Frequent Visitor
Posts: 53
Joined: Wed Apr 01, 2015 10:20 am

Re: HAP AC

Thu Feb 11, 2016 11:30 am

we have so many choice for other brand model such as Asus, Netgear.
You gotta be kidding, right? Comparing ROS to stock firmware of SOHO routers or even DD-WRT is like comparing bicycle to motorcycle - both rides, both ends with "cycle" but...[/quote]

ROS have more features but is not equals high performance for Hap AC!
Who can provide result of performance testing?
 
User avatar
G2Dolphin
Member Candidate
Member Candidate
Posts: 154
Joined: Sun May 17, 2015 6:03 pm
Location: Moscow, Russia

Re: HAP AC

Thu Feb 11, 2016 12:34 pm

Who can provide result of performance testing?
http://routerboard.com can.
Home: RB3011UiAS-IN (2011 case+3011-RM), hAP ac, mAP2n/mAP2nD, GrooveA-52HPn, hEX (r3), hAP lite, RB951G-2HnD
Work: RB2011UiAS-RM / UiAS-2HnD-IN, RB951G-2HnD, hEX (r3), CRS125-24G-1S-2HnD-IN, CCR1009-8G-1S-1S+
 
FiX
just joined
Posts: 1
Joined: Thu Feb 11, 2016 3:07 pm

Re: HAP AC

Thu Feb 11, 2016 3:11 pm

I'm sorry for the dumb question but I've never used MikroTik products before.
Is there a way to use 1st port on the LAN side to power the router over PoE? Are these (1 to 5) ports interchangable?

Thanks.
 
User avatar
G2Dolphin
Member Candidate
Member Candidate
Posts: 154
Joined: Sun May 17, 2015 6:03 pm
Location: Moscow, Russia

Re: HAP AC

Thu Feb 11, 2016 3:13 pm

I'm sorry for the dumb question but I've never used MikroTik products before.
Is there a way to use 1st port on the LAN side to power the router over PoE?

Thanks.
Yes, just add it to your LAN bridge. Or, if using chip switching, use master-port.
I'm using this in 2011UiAS. LAN device powering router too, and WAN on the second port.
Home: RB3011UiAS-IN (2011 case+3011-RM), hAP ac, mAP2n/mAP2nD, GrooveA-52HPn, hEX (r3), hAP lite, RB951G-2HnD
Work: RB2011UiAS-RM / UiAS-2HnD-IN, RB951G-2HnD, hEX (r3), CRS125-24G-1S-2HnD-IN, CCR1009-8G-1S-1S+
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6610
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: HAP AC

Thu Feb 11, 2016 3:28 pm

kobuki product is called hAP AC (the same name as topic). I think it is easy name to remember.

RB962UiGS-5HacT2HnT is product code, and it collects all information you need to know about ports and features (if you like).
 
nkourtzis
Member Candidate
Member Candidate
Posts: 195
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: HAP AC

Fri Feb 12, 2016 9:44 am

It is obvious, that this is not the product we were hoping for. Much smaller flash than RB951 (no partitions), not that potent CPU, 1Gb CPU-Switch Interface. I think I will stick with my beloved workhorse RB951G (able to hold 3 partitions with different configs/routeros versions) and wait for something based on a newer chip such as IPQ40x9.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6610
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: HAP AC

Fri Feb 12, 2016 10:01 am

nkourtzis, I'm not a fan of partitions at least on small routers, perhaps multiple partitions are the vital thing for SOHO device (or maybe not).
Though I leave partitions for border devices, and now I'm enjoying enormous speed on unoccupied 5GHz band at home.
 
nkourtzis
Member Candidate
Member Candidate
Posts: 195
Joined: Tue Dec 11, 2012 12:56 am
Location: Greece

Re: HAP AC

Fri Feb 12, 2016 10:58 am

nkourtzis, I'm not a fan of partitions at least on small routers, perhaps multiple partitions are the vital thing for SOHO device (or maybe not).
Though I leave partitions for border devices, and now I'm enjoying enormous speed on unoccupied 5GHz band at home.
I could maybe live with no partitions, but 16MB? This leaves no space for even a metarouter instance! C'mon guys, would even 32MB be such a problem? Flash is so cheap these days, for me no Mikrotik device should be produced with less than 32MB, except maybe the mAPs. Or maybe include a SD card slot, to extend the internal storage for whoever needs to do this.

As for the CPU, when you introduce a device capable of 800+Mbps aggregate WiFi TCP bandwidth, it should be capable of routing all this speed while applying a few queues/rules. You have a dual-core board and there is also IPQ40, why not use these?

RB951 was above the simple home device, a true swiss army knife in a very versatile home factor. HAP AC appears to be solely a home or a very-SOHO device, but not able to do much beyond this.
Last edited by nkourtzis on Fri Feb 12, 2016 11:36 am, edited 1 time in total.
 
User avatar
sergejs
MikroTik Support
MikroTik Support
Posts: 6610
Joined: Thu Mar 31, 2005 3:33 pm
Location: Riga, Latvia
Contact:

Re: HAP AC

Fri Feb 12, 2016 11:19 am

metaROUTER is another thing that is very questionable on SOHO routers.

In our tests hAP ac is doing very well and it has almost double throughput for even for 951G, you are reffering,
http://routerboard.com/RB962UiGS-5HacT2HnT
 
User avatar
spippan
Frequent Visitor
Frequent Visitor
Posts: 99
Joined: Wed Nov 12, 2014 1:00 pm

Re: HAP AC

Fri Feb 12, 2016 1:45 pm

Please answer on my question. What about wifi speed between iPad Pro and MikroTik HAP AC? Can I get 100 mb/per sec? 8)
depends!

...on SNR, on site influences, distance, signal quality ...
per definition of 802.11ac on 5GHz it is possible....
---
networking technician in a data center in austria
RB922UAGS-5HPacD > SXT LTE > Hutchinson 3G Austria/LTE
hAP ac lite > Hutchinson 3G Austria/LTE (brg)
RB951Ui-2HnD > A1 Telekom ADSL(brg)
RB951Ui-2HnD > A1 VDSL(brg)
 
User avatar
spippan
Frequent Visitor
Frequent Visitor
Posts: 99
Joined: Wed Nov 12, 2014 1:00 pm

Re: HAP AC

Fri Feb 12, 2016 1:46 pm

so ... ment are ... 5GHz a/n/ac ... or am i mistaking something here....?
because on my GrooveA 52 i also have 5GHz a/n but no ac.....
According to the product flier, it's 5Ghz a/n/ac, and 2Ghz b/g/n (no ac on 2ghz)
yes as i corrected my post in the edit ;)

of course there's no 802.11ac on 2.4GHz
---
networking technician in a data center in austria
RB922UAGS-5HPacD > SXT LTE > Hutchinson 3G Austria/LTE
hAP ac lite > Hutchinson 3G Austria/LTE (brg)
RB951Ui-2HnD > A1 Telekom ADSL(brg)
RB951Ui-2HnD > A1 VDSL(brg)
 
User avatar
spippan
Frequent Visitor
Frequent Visitor
Posts: 99
Joined: Wed Nov 12, 2014 1:00 pm

Re: HAP AC

Fri Feb 12, 2016 1:48 pm

SORRY ... quick shot...
just saw it in the table!!!
Wireless standards 802.11a/n/ac
all good ;)
the website says...
The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.
so ... ment are ... 5GHz a/n/ac ... or am i mistaking something here....?
because on my GrooveA 52 i also have 5GHz a/n but no ac.....
That sentence says, a) this is an 802.11ac device and b) it is backward compatible with b/g/n and a/n devices.

If that's not what you were asking, I apologize.

haha yeah, as edited, i misread that sentence a little and i was too fast in posting. thx again
---
networking technician in a data center in austria
RB922UAGS-5HPacD > SXT LTE > Hutchinson 3G Austria/LTE
hAP ac lite > Hutchinson 3G Austria/LTE (brg)
RB951Ui-2HnD > A1 Telekom ADSL(brg)
RB951Ui-2HnD > A1 VDSL(brg)
 
ka4opi4a
newbie
Posts: 30
Joined: Sat Sep 06, 2014 6:36 pm
Location: Bulgaria/EU

Re: HAP AC

Fri Feb 12, 2016 2:32 pm

I think you can always extend the memory with usb port. Correct ?
 
jarda
Forum Guru
Forum Guru
Posts: 7560
Joined: Mon Oct 22, 2012 4:46 pm

Re: HAP AC

Fri Feb 12, 2016 3:38 pm

I think you can always extend the memory with usb port. Correct ?
Not so much correct.

USB drive cannot be used as ram (aka "memory"). It cannot be used as extension of primary flash drive for installing the software, nor just for package store before installation. Cannot be used as booting partition for ros. But can be used as general file storage, logging area or http proxy storage.
 
danxx26
just joined
Posts: 4
Joined: Fri Feb 12, 2016 6:33 pm

Re: HAP AC

Fri Feb 12, 2016 6:43 pm

I just received RB952Ui-5ac2nD or HAP AC lite. Hoping that someone else may have attempted to use this in CAP mode and may have a work around for my issue. I am only able to see one radio on the 2.4Ghz band, when I follow the steps to create a second config for the 5Ghz band all I get is a VirtualAP?

Flags: X - disabled, R - running
0 X ;;; managed by CAPsMAN
;;; channel: 2427/20-Ce/gn(30dBm), SSID: wifisec_cap, CAPsMAN forwarding
name="wlan1" mtu=1500 mac-address=E4:8D:8C:D4:B7:3B arp=enabled
interface-type=Atheros AR9300 mode=ap-bridge ssid="MikroTik-D4B73B"
frequency=auto band=2ghz-b/g/n channel-width=20/40mhz-Ce
scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1
wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no
bridge-mode=enabled default-authentication=yes default-forwarding=yes
default-ap-tx-limit=0 default-client-tx-limit=0 hide-ssid=no
security-profile=default compression=no

1 X ;;; managed by CAPsMAN
;;; SSID: wifisec_cap5G, CAPsMAN forwarding
name="wlan18" mtu=1500 mac-address=E4:8D:8C:D4:B7:3B arp=enabled
interface-type=virtual-AP master-interface=wlan1

any suggestions are greatly appreciated!

Thank you.
 
User avatar
G2Dolphin
Member Candidate
Member Candidate
Posts: 154
Joined: Sun May 17, 2015 6:03 pm
Location: Moscow, Russia

Re: HAP AC

Fri Feb 12, 2016 7:28 pm

any suggestions are greatly appreciated!
Check you have wireless-cm2 activated in System - Packages.
And yes, this is hAP ac topic, it's an another device.
Home: RB3011UiAS-IN (2011 case+3011-RM), hAP ac, mAP2n/mAP2nD, GrooveA-52HPn, hEX (r3), hAP lite, RB951G-2HnD
Work: RB2011UiAS-RM / UiAS-2HnD-IN, RB951G-2HnD, hEX (r3), CRS125-24G-1S-2HnD-IN, CCR1009-8G-1S-1S+
 
kobuki
Member Candidate
Member Candidate
Posts: 123
Joined: Sat Apr 02, 2011 5:59 pm

Re: HAP AC

Fri Feb 12, 2016 9:28 pm

kobuki product is called hAP AC (the same name as topic). I think it is easy name to remember.

RB962UiGS-5HacT2HnT is product code, and it collects all information you need to know about ports and features (if you like).
Thanks -- however the post where I noted that it was meant to be a joke and I made clear I know the marketing name too, has been removed by a mod without prior notice. (I guess as a forum mod you can backtrack that if you want.)

I apologise if it was so easily misunderstood and almost no one felt the slight irony and playfulness. I can assure you that after using various (mostly smaller) Mikrotik devices for like 5-6 years I know your naming scheme.
 
danxx26
just joined
Posts: 4
Joined: Fri Feb 12, 2016 6:33 pm

Re: HAP AC

Sat Feb 13, 2016 5:11 am

any suggestions are greatly appreciated!
Check you have wireless-cm2 activated in System - Packages.
And yes, this is hAP ac topic, it's an another device.
Thank you G2Dolphin!! I had the cm2 package on the CaPSMan but not on the Cap. Once I made the change I rebooted. I also had to remove the remote cap and a few minutes later it came back with both radios!!

Thanks again!!
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2169
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: HAP AC

Sat Feb 13, 2016 8:56 pm

Inside photo of hAP AC from cdr
You do not have the required permissions to view the files attached to this post.
LAN, FTTx, Wireless. ISP operator
 
barkas
Member Candidate
Member Candidate
Posts: 258
Joined: Sun Sep 25, 2011 10:51 pm

AW: Re: HAP AC

Sat Feb 13, 2016 9:03 pm

metaROUTER is another thing that is very questionable on SOHO routers.
Is it? Mikrotik Routers are the Swiss army knives of networking, so little flash seriously cramps my style.
I will not buy any mikrotik device with 16mb flash, either privately or professionally.
Because of that at work we are buying up rb750gl stocks...

It's ridiculous, this decision cannot possibly be worth the money you save by it.
 
Siona
Frequent Visitor
Frequent Visitor
Posts: 83
Joined: Thu Jan 29, 2015 11:56 am

Re: HAP AC

Sat Feb 13, 2016 9:10 pm

Inside photo of hAP AC from cdr
Can we get better quality pic? I can see only 2 antennas on board. Do we have mmcx connectors there? Not sure... Pic quality is to low.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2169
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: HAP AC

Sat Feb 13, 2016 9:22 pm

It is original resolution. I see six antennas
You do not have the required permissions to view the files attached to this post.
LAN, FTTx, Wireless. ISP operator
 
tmcnulty1982
just joined
Posts: 8
Joined: Sat Feb 13, 2016 11:29 pm

Re: HAP AC

Sat Feb 13, 2016 11:32 pm

This might be a silly question, but is it possible to use this device as a combination Router and Access Point? Or do I need to buy a hEX too?

I don't see anything about it in the docs, but there are performance test results at the bottom of the product info page that suggest a "Routing" mode is possible:

http://routerboard.com/RB962UiGS-5HacT2HnT
Last edited by tmcnulty1982 on Sat Feb 13, 2016 11:43 pm, edited 1 time in total.
 
InoX
Forum Guru
Forum Guru
Posts: 1941
Joined: Tue Jan 09, 2007 6:44 pm

Re: HAP AC

Sat Feb 13, 2016 11:42 pm

Like any other mikrotik you can set one radio in bridge with lan port and one in router mode. No big deal.
 
jarda
Forum Guru
Forum Guru
Posts: 7560
Joined: Mon Oct 22, 2012 4:46 pm

HAP AC

Sat Feb 13, 2016 11:43 pm

It is router. And it has wifi interfaces and license higher than level 3 so yes, it is possible with no doubts.
 
tmcnulty1982
just joined
Posts: 8
Joined: Sat Feb 13, 2016 11:29 pm

Re: HAP AC

Sat Feb 13, 2016 11:45 pm

Like any other mikrotik you can set one radio in bridge with lan port and one in router mode. No big deal.
The same for the ethernet ports I assume? So both radios will bridge with LAN but one ethernet port will serve as WAN? Like a standard SOHO "wireless router"..
 
tmcnulty1982
just joined
Posts: 8
Joined: Sat Feb 13, 2016 11:29 pm

Re: HAP AC

Sat Feb 13, 2016 11:45 pm

It is router. And it has wifi interfaces and license higher than level 3 so yes, it is possible with no doubts.
Great thanks!
 
InoX
Forum Guru
Forum Guru
Posts: 1941
Joined: Tue Jan 09, 2007 6:44 pm

Re: HAP AC

Sat Feb 13, 2016 11:46 pm

You can bridge ports and radios in any configuration you want. Also any port/radio can acts like one or multiple wan's.
Last edited by InoX on Sat Feb 13, 2016 11:47 pm, edited 1 time in total.
 
ka4opi4a
newbie
Posts: 30
Joined: Sat Sep 06, 2014 6:36 pm
Location: Bulgaria/EU

Re: HAP AC

Sat Feb 13, 2016 11:47 pm

What exactly do you mean ? This is normal dual band wifi AC router.
 
InoX
Forum Guru
Forum Guru
Posts: 1941
Joined: Tue Jan 09, 2007 6:44 pm

Re: HAP AC

Sat Feb 13, 2016 11:49 pm

normal dual band wifi AC router.
No mikrotik router is that. It is much more.
 
User avatar
honzam
Forum Guru
Forum Guru
Posts: 2169
Joined: Wed Feb 27, 2008 10:27 pm
Location: Czech Republic

Re: HAP AC

Sun Feb 14, 2016 12:11 am

From manual:
Third chain of each band can have the antenna changed to a different one, there are two uFL connectors
inside the case, each has a small antenna connected. You can unplug these antennas, and change the
third chain to your own antenna. In most situations this is not required, so the connector is not easily
accessible or marked
LAN, FTTx, Wireless. ISP operator
 
Quindor
Member
Member
Posts: 337
Joined: Tue Aug 14, 2012 2:57 am
Location: Noord-Brabant, The Netherlands
Contact:

Re: HAP AC

Mon Feb 15, 2016 12:39 am

I'm really hoping to see wireless performance tests with the 2.4Ghz and 5Ghz AC when someone gets their hands on it! Really interested to see how well it performs and what kind of CPU load you would see when say pushing 600Mbps through the 5Ghz wireless!

Using CAPsMAN these could be a worthy competitor for the UAP-AC-PRO. Using an RF Elements Stationbox for aesthetics when hanging off a ceiling, the only thing the UAP-AC-PRO has going for it is it's 802.3at/af comparability. The hAP AC is a bit cheaper though, although needing a station box negates that a bit. :(

So in the end, very interested to see if it does well using AC. Currently the UAP-AC-PRO is lacking a bit in performance because of the software Ubiquiti has running on it, they recently released a performance "alpha" version for it which raised it from 400~450Mbps to ~500Mbps but still not above that when using a 3x3 client or multiple clients. And when using guest functionality currently it limits all your SSID's to max 150Mbps! So that's a no-go all together.

Oh, the UAP-AC-PRO also supports bandsteering. Does anyone know if Mikrotik will create something like bandsteering in CAPsMAN? It could prevent a lot of headaches!

So people who get it, do some tests and post screenshots! :D
http://www.campzone.nl World's Largest Outdoor LANParty, http://intermit.tech Intermittend Technology blog, My blog about the ESP8266, IP Camera's and other tech related subjects!
 
ayufan
Member
Member
Posts: 331
Joined: Sun Jun 03, 2007 9:35 pm
Contact:

Re: HAP AC

Mon Feb 15, 2016 10:24 pm

Yeah. I would like to see the wireless performance :) I know how it works on Archer C7 (the same HW) with OpenWrt. It's interesting to see how it works on MikroTik.
hAP AC, TP-Link Archer C7 v2, RB951G, RB450G, RPI2, RPI zero
 
alber
just joined
Posts: 6
Joined: Tue Feb 16, 2016 12:35 am

Re: HAP AC

Tue Feb 16, 2016 12:51 am

My fast test result: http://take.ms/fAhKw
For test was used nas qnap-ts210 connected to lan (1 Gbit) and macbook pro 15" 2015 802.11ac (connection speed 867 - 1300 Mbits/s)
Traffic was generated with iperf
 
Quindor
Member
Member
Posts: 337
Joined: Tue Aug 14, 2012 2:57 am
Location: Noord-Brabant, The Netherlands
Contact:

Re: HAP AC

Tue Feb 16, 2016 1:28 am

My fast test result: http://take.ms/fAhKw
For test was used nas qnap-ts210 connected to lan (1 Gbit) and macbook pro 15" 2015 802.11ac (connection speed 867 - 1300 Mbits/s)
Traffic was generated with iperf
Thnx!

Ok, dat looks ok, not great, but ok. Judging from your comment that it would connect at 1300Mbit your Macbook is a 3x3 AC version?


If you would be willing:
  • Did you happen to note what the CPU usage on the router was?
    How was it configured? As an Access-Point, CAPsMAN, routed/bridged?
    What where the conditions? (How far away, LineofSight or walls, etc.?)
    What blocksize did you use in iperf? Could you test with 1MB blocks (Both on server and client)?
    Could you also try using 4 and 8 parralel connections in iperf to see what difference that makes?
http://www.campzone.nl World's Largest Outdoor LANParty, http://intermit.tech Intermittend Technology blog, My blog about the ESP8266, IP Camera's and other tech related subjects!
 
alber
just joined
Posts: 6
Joined: Tue Feb 16, 2016 12:35 am

Re: HAP AC

Tue Feb 16, 2016 1:17 pm

Ok, dat looks ok, not great, but ok. Judging from your comment that it would connect at 1300Mbit your Macbook is a 3x3 AC version?
Yes. It has BCM943602 chip with 3 streams for 2.4 and 5 networks
Did you happen to note what the CPU usage on the router was?
90 - 95 %
How was it configured? As an Access-Point, CAPsMAN, routed/bridged?
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-onlyn channel-width=20/40mhz-Ce \
    country=poland disabled=no distance=indoors hw-protection-mode=rts-cts \
    hw-retries=15 mode=ap-bridge radio-name="" ssid=Home wireless-protocol=\
    802.11 wmm-support=enabled wps-mode=disabled
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=\
    20/40/80mhz-Ceee country=poland disabled=no distance=indoors \
    hw-protection-mode=rts-cts mode=ap-bridge radio-name="" ssid=Home5 \
    wireless-protocol=802.11 wmm-support=enabled wps-mode=disabled
set wlan1 discover=no
/interface wireless nstreme
set wlan1 enable-polling=no
set wlan2 enable-polling=no
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk mode=dynamic-keys \
    supplicant-identity=MikroTik wpa-pre-shared-key=********** \
    wpa2-pre-shared-key=**********
/interface bridge port
add bridge=bridge-local interface=ether2-master-local
add bridge=bridge-local interface=wlan1
add bridge=bridge-local interface=wlan2
What where the conditions? (How far away, LineofSight or walls, etc.?)
Near 3m, line of sight. Distance near 10m with one wall - connection speed 500 - 800 Mbps. In my case, coverage similar to 2.4 network with 4 - 5 neighbors
What blocksize did you use in iperf? Could you test with 1MB blocks (Both on server and client)?
Could you also try using 4 and 8 parralel connections in iperf to see what difference that makes?
Was used default settings.
You can prvovide iperf command with intresting for you params, I will do these tests
 
Quindor
Member
Member
Posts: 337
Joined: Tue Aug 14, 2012 2:57 am
Location: Noord-Brabant, The Netherlands
Contact:

Re: HAP AC

Tue Feb 16, 2016 9:44 pm

You can prvovide iperf command with intresting for you params, I will do these tests
@alber you are awesome! Thank you very much for all your answers! :D

I always use iperf2 from https://iperf.fr/iperf-download.php, if you want you can use iperf3 too but the command line switches are a bit different.

If you are using iperf (2) then use the following settings please:
server: "iperf -s -w 1MB"

1 Channel
client: "iperf -c xxx.xxx.xxx.xxx -w 1MB -R -P 1 -t 30"

4 Channels
client: "iperf -c xxx.xxx.xxx.xxx -w 1MB -R -P 4 -t 30"

16 Channels
client: "iperf -c xxx.xxx.xxx.xxx -w 1MB -R -P 16 -t 30"


A second set (if you are willing):
server: "iperf -s -w 64KB"

1 Channel
client: "iperf -c xxx.xxx.xxx.xxx -w 64KB -R -P 1 -t 30"

4 Channels
client: "iperf -c xxx.xxx.xxx.xxx -w 64KB -R -P 4 -t 30"

16 Channels
client: "iperf -c xxx.xxx.xxx.xxx -w 64KB -R -P 16 -t 30"

That should give us a good overview of total bandwidth attainable using one stream and multiple streams both using large block sizes and small.
http://www.campzone.nl World's Largest Outdoor LANParty, http://intermit.tech Intermittend Technology blog, My blog about the ESP8266, IP Camera's and other tech related subjects!
 
alber
just joined
Posts: 6
Joined: Tue Feb 16, 2016 12:35 am

Re: HAP AC

Wed Feb 17, 2016 11:30 am

That should give us a good overview of total bandwidth attainable using one stream and multiple streams both using large block sizes and small.
My NAS can't use tcp window size greater then 320KB and for test with 16 connection some connections return - write2 failed: Connection reset by peer. Cpu load 90 - 95 %


System default settings

1. Mac client (129 KByte (default)), NAS server
iperf -c qnap -t 30 -P 1 && iperf -c qnap -t 30 -P 4 && iperf -c qnap -t 30 -P 16; iperf -s

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 85.3 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51509
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 1.65 GBytes 473 Mbits/sec
[ 5] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51510
[ 6] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51512
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51511
[ 7] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51513
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-30.0 sec 411 MBytes 115 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 414 MBytes 116 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-30.0 sec 414 MBytes 116 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-30.0 sec 418 MBytes 117 Mbits/sec
[SUM] 0.0-30.0 sec 1.62 GBytes 463 Mbits/sec
[ 5] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51516
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51515
[ 13] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51523
[ 10] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51520
[ 11] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51521
[ 12] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51522
[ 9] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51519
[ 7] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51518
[ 6] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51517
[ 8] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51514
[ 14] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51527
[ 15] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51528
[ 16] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51529
[ 17] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51526
[ 19] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51525
[ 18] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51524
[ ID] Interval Transfer Bandwidth
[ 13] 0.0-30.1 sec 74.6 MBytes 20.8 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 12] 0.0-30.3 sec 72.9 MBytes 20.2 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 8] 0.0-30.2 sec 114 MBytes 31.8 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 9] 0.0-30.2 sec 102 MBytes 28.2 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.2 sec 79.6 MBytes 22.1 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 14] 0.0-30.2 sec 116 MBytes 32.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-30.3 sec 94.4 MBytes 26.1 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 17] 0.0-30.2 sec 106 MBytes 29.4 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 18] 0.0-30.2 sec 96.1 MBytes 26.7 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 10] 0.0-30.3 sec 113 MBytes 31.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 15] 0.0-30.3 sec 115 MBytes 31.8 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 16] 0.0-30.3 sec 91.9 MBytes 25.4 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-30.3 sec 98.0 MBytes 27.1 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 19] 0.0-30.3 sec 93.8 MBytes 25.9 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-30.4 sec 94.9 MBytes 26.2 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 11] 0.0-30.4 sec 122 MBytes 33.8 Mbits/sec
[SUM] 0.0-30.4 sec 1.55 GBytes 438 Mbits/sec

2. Mac server, NAS client (20.0 KByte (default))
iperf -s; iperf -c 192.168.88.137 -t 30 -P 1 && iperf -c 192.168.88.137 -t 30 -P 4 && iperf -c 192.168.88.137 -t 30 -P 16

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 128 KByte (default)
------------------------------------------------------------
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36929
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 1.38 GBytes 393 Mbits/sec
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36931
[ 5] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36932
[ 6] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36933
[ 7] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36934
[ 4] 0.0-30.0 sec 302 MBytes 84.4 Mbits/sec
[ 6] 0.0-30.1 sec 315 MBytes 87.9 Mbits/sec
[ 7] 0.0-30.1 sec 421 MBytes 117 Mbits/sec
[ 5] 0.0-30.1 sec 401 MBytes 112 Mbits/sec
[SUM] 0.0-30.1 sec 1.41 GBytes 402 Mbits/sec
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36948
[ 5] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36949
[ 6] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36950
[ 7] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36951
[ 8] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 36952
[ 4] 0.0-30.1 sec 332 MBytes 92.5 Mbits/sec
[ 5] 0.0-30.1 sec 332 MBytes 92.4 Mbits/sec
[ 6] 0.0-30.1 sec 268 MBytes 74.6 Mbits/sec
[ 8] 0.0-30.1 sec 233 MBytes 65.0 Mbits/sec
[ 7] 0.0-30.1 sec 284 MBytes 79.1 Mbits/sec
[SUM] 0.0-30.1 sec 1.41 GBytes 403 Mbits/sec


Window size request 320KB

1. Mac client (321 KByte (WARNING: requested 320 KByte)), NAS server
iperf -c qnap -t 30 -P 1 -w 320KB && iperf -c qnap -t 30 -P 4 -w 320KB && iperf -c qnap -t 30 -P 16 -w 320KB; iperf -s -w 320KB

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 320 KByte
------------------------------------------------------------
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51563
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 769 MBytes 215 Mbits/sec
[ 5] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51566
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51567
[ 7] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51569
[ 6] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51568
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-30.0 sec 350 MBytes 97.9 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-30.0 sec 348 MBytes 97.4 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 351 MBytes 98.0 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-30.0 sec 350 MBytes 97.8 Mbits/sec
[SUM] 0.0-30.0 sec 1.37 GBytes 391 Mbits/sec
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51579
[ 8] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51578
[ 7] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51582
[ 6] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51581
[ 5] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51580
[ 14] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51588
[ 11] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51585
[ 12] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51586
[ 13] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51587
[ 10] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51584
[ 9] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51583
[ 15] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51593
[ 19] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51591
[ 16] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51589
[ 17] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51592
[ 18] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51590
[ ID] Interval Transfer Bandwidth
[ 12] 0.0-30.1 sec 111 MBytes 30.9 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 18] 0.0-30.1 sec 89.8 MBytes 25.0 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 8] 0.0-30.1 sec 111 MBytes 31.0 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-30.1 sec 101 MBytes 28.2 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 11] 0.0-30.1 sec 111 MBytes 30.9 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 17] 0.0-30.1 sec 87.1 MBytes 24.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.1 sec 110 MBytes 30.8 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-30.1 sec 111 MBytes 31.0 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-30.1 sec 110 MBytes 30.6 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 14] 0.0-30.1 sec 109 MBytes 30.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 9] 0.0-30.1 sec 110 MBytes 30.7 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 15] 0.0-30.1 sec 110 MBytes 30.6 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 19] 0.0-30.1 sec 88.0 MBytes 24.5 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 16] 0.0-30.1 sec 87.8 MBytes 24.5 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 13] 0.0-30.1 sec 110 MBytes 30.6 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 10] 0.0-30.1 sec 108 MBytes 30.1 Mbits/sec
[SUM] 0.0-30.1 sec 1.63 GBytes 464 Mbits/sec

2. Mac server, NAS client (320 KByte)
iperf -s -w 320KB; iperf -c 192.168.88.137 -t 30 -P 1 -w 320KB && iperf -c 192.168.88.137 -t 30 -P 4 -w 320KB && iperf -c 192.168.88.137 -t 30 -P 16 -w 320KB

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 320 KByte
------------------------------------------------------------
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37032
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.8 sec 81.2 MBytes 22.1 Mbits/sec
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37034
[ 5] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37035
[ 6] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37036
[ 7] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37037
[ 4] 0.0-30.0 sec 288 MBytes 80.4 Mbits/sec
[ 5] 0.0-30.0 sec 359 MBytes 100 Mbits/sec
[ 6] 0.0-30.0 sec 276 MBytes 77.2 Mbits/sec
[ 7] 0.0-30.0 sec 312 MBytes 87.2 Mbits/sec
[SUM] 0.0-30.0 sec 1.21 GBytes 345 Mbits/sec
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37045
[ 5] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37048
[ 6] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37049
[ 7] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37050
[ 8] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37054
[ 9] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37051
[ 10] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37052
[ 11] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37053
[ 9] 0.0-31.1 sec 157 MBytes 42.4 Mbits/sec
[ 4] 0.0-31.1 sec 148 MBytes 40.0 Mbits/sec
[ 7] 0.0-31.1 sec 160 MBytes 43.3 Mbits/sec
[ 8] 0.0-31.1 sec 166 MBytes 44.7 Mbits/sec
[ 10] 0.0-31.1 sec 153 MBytes 41.3 Mbits/sec
[ 11] 0.0-31.1 sec 158 MBytes 42.7 Mbits/sec
[ 5] 0.0-31.1 sec 152 MBytes 41.0 Mbits/sec
[ 6] 0.0-31.1 sec 149 MBytes 40.3 Mbits/sec
[SUM] 0.0-31.1 sec 1.21 GBytes 336 Mbits/sec


Window size request 64KB

1. Mac client (65.0 KByte (WARNING: requested 64.0 KByte)), NAS server
iperf -c qnap -t 30 -P 1 -w 64KB && iperf -c qnap -t 30 -P 4 -w 64KB && iperf -c qnap -t 30 -P 16 -w 64KB; iperf -s -w 64KB

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 128 KByte (WARNING: requested 64.0 KByte)
------------------------------------------------------------
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51684
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 465 MBytes 130 Mbits/sec
[ 5] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51685
[ 7] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51688
[ 6] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51687
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51686
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-30.0 sec 234 MBytes 65.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-30.0 sec 216 MBytes 60.4 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-30.0 sec 233 MBytes 65.1 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 234 MBytes 65.5 Mbits/sec
[SUM] 0.0-30.0 sec 917 MBytes 256 Mbits/sec
[ 4] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51691
[ 10] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51697
[ 11] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51698
[ 12] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51699
[ 8] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51692
[ 9] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51696
[ 6] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51694
[ 5] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51693
[ 19] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51705
[ 16] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51703
[ 15] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51702
[ 13] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51700
[ 17] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51704
[ 18] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51706
[ 14] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51701
[ 7] local 192.168.88.254 port 5001 connected with 192.168.88.137 port 51695
[ ID] Interval Transfer Bandwidth
[ 12] 0.0-30.0 sec 93.8 MBytes 26.2 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 16] 0.0-30.0 sec 92.6 MBytes 25.9 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 15] 0.0-30.0 sec 93.6 MBytes 26.2 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 8] 0.0-30.0 sec 94.1 MBytes 26.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-30.0 sec 94.6 MBytes 26.4 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 11] 0.0-30.0 sec 95.9 MBytes 26.8 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 9] 0.0-30.0 sec 94.8 MBytes 26.5 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 10] 0.0-30.0 sec 93.2 MBytes 26.0 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 6] 0.0-30.0 sec 94.1 MBytes 26.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 13] 0.0-30.0 sec 92.1 MBytes 25.7 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 17] 0.0-30.0 sec 94.1 MBytes 26.3 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 18] 0.0-30.0 sec 93.5 MBytes 26.1 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 14] 0.0-30.1 sec 93.8 MBytes 26.2 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 7] 0.0-30.0 sec 93.4 MBytes 26.1 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 5] 0.0-30.1 sec 92.6 MBytes 25.9 Mbits/sec
[ ID] Interval Transfer Bandwidth
[ 19] 0.0-30.1 sec 92.4 MBytes 25.8 Mbits/sec
[SUM] 0.0-30.1 sec 1.46 GBytes 418 Mbits/sec


2. Mac server, NAS client (128 KByte (WARNING: requested 64.0 KByte))
iperf -s -w 64KB; iperf -c 192.168.88.137 -t 30 -P 1 -w 64KB && iperf -c 192.168.88.137 -t 30 -P 4 -w 64KB && iperf -c 192.168.88.137 -t 30 -P 16 -w 64KB

------------------------------------------------------------
Server listening on TCP port 5001
TCP window size: 64.0 KByte
------------------------------------------------------------
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37129
[ ID] Interval Transfer Bandwidth
[ 4] 0.0-32.9 sec 90.6 MBytes 23.1 Mbits/sec
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37131
[ 5] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37132
[ 6] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37133
[ 7] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37134
[ 5] 0.0-30.4 sec 53.4 MBytes 14.7 Mbits/sec
[ 6] 0.0-30.4 sec 53.8 MBytes 14.8 Mbits/sec
[ 4] 0.0-30.4 sec 64.2 MBytes 17.7 Mbits/sec
[ 7] 0.0-30.4 sec 53.3 MBytes 14.7 Mbits/sec
[SUM] 0.0-30.4 sec 225 MBytes 62.0 Mbits/sec
[ 4] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37137
[ 5] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37140
[ 6] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37141
[ 7] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37143
[ 8] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37146
[ 9] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37147
[ 10] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37148
[ 11] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37149
[ 12] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37150
[ 13] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37151
[ 14] local 192.168.88.137 port 5001 connected with 192.168.88.254 port 37152
[ 7] 0.0-30.1 sec 130 MBytes 36.1 Mbits/sec
[ 4] 0.0-30.1 sec 122 MBytes 34.1 Mbits/sec
[ 5] 0.0-30.1 sec 115 MBytes 31.9 Mbits/sec
[ 6] 0.0-30.1 sec 132 MBytes 36.9 Mbits/sec
[ 8] 0.0-30.1 sec 135 MBytes 37.6 Mbits/sec
[ 9] 0.0-30.1 sec 126 MBytes 35.0 Mbits/sec
[ 10] 0.0-30.1 sec 126 MBytes 35.0 Mbits/sec
[ 11] 0.0-30.1 sec 131 MBytes 36.6 Mbits/sec
[ 12] 0.0-30.1 sec 130 MBytes 36.2 Mbits/sec
[ 13] 0.0-30.1 sec 120 MBytes 33.4 Mbits/sec
[ 14] 0.0-30.1 sec 136 MBytes 37.8 Mbits/sec
[SUM] 0.0-30.1 sec 1.37 GBytes 391 Mbits/sec
  • 1
  • 3
  • 4
  • 5
  • 6
  • 7
  • 11

Who is online

Users browsing this forum: No registered users and 12 guests